answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=2
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 0098005F00000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: PN-SC_1V8_CN_LLNUMLD_224_YYMMDD_CAM_MCPMCP_O
Changing baudrate to 921600...
Done.
Reading full Flash...
All Done.
NX-915 FORMATT
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=2
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 0098005F00000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: PN-SC_1V8_CN_LLNUMLD_224_YYMMDD_CAM_MCPMCP_O
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x01C00000, size=0x003E0000
All Done
MITO 302 READ
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=16 TXD=18
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: CBM68B_ZH_V249
Changing baudrate to 921600...
Done.
Reading full Flash...
All Done.
MITO 302 FORMATT
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=16 TXD=18
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: CBM68B_ZH_V249
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
NX-G522 READ
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=18 TXD=16
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: E505E.PR1.V8
Changing baudrate to 921600...
Done.
Reading full Flash...
All Done.
NX-G522 FORMATT
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=18 TXD=16
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: E505E.PR1.V8
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x001FC000
All Done
MITO 2000 READ
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=16 TXD=18
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: CBM68_1_2_ZH_CEI_V8
Changing baudrate to 921600...
Done.
Reading full Flash...
All Done.
MITO 2000 FORMATT
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=16 TXD=18
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: CBM68_1_2_ZH_CEI_V8
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
K-TOUCH B830 FLASH
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=5 TXD=6
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6226, HardwareVer:8A02, SoftwareVer:8A01
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 0098004900000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: 007243_420_V4002
Changing baudrate to 921600...
Done.
Analysis the UID-Encryption info, Some file may need a long time...
Decryption complete. Key[52357960127F512C]-BB
Downloading Flash file...
All Done.
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=2
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 0098005F00000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: PN-SC_1V8_CN_LLNUMLD_224_YYMMDD_CAM_MCPMCP_O
Changing baudrate to 921600...
Done.
Reading full Flash...
All Done.
NX-915 FORMATT
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=2
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 0098005F00000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: PN-SC_1V8_CN_LLNUMLD_224_YYMMDD_CAM_MCPMCP_O
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x01C00000, size=0x003E0000
All Done
MITO 302 READ
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=16 TXD=18
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: CBM68B_ZH_V249
Changing baudrate to 921600...
Done.
Reading full Flash...
All Done.
MITO 302 FORMATT
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=16 TXD=18
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: CBM68B_ZH_V249
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
NX-G522 READ
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=18 TXD=16
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: E505E.PR1.V8
Changing baudrate to 921600...
Done.
Reading full Flash...
All Done.
NX-G522 FORMATT
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=18 TXD=16
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: E505E.PR1.V8
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x001FC000
All Done
MITO 2000 READ
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=16 TXD=18
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: CBM68_1_2_ZH_CEI_V8
Changing baudrate to 921600...
Done.
Reading full Flash...
All Done.
MITO 2000 FORMATT
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=16 TXD=18
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: CBM68_1_2_ZH_CEI_V8
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
K-TOUCH B830 FLASH
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=5 TXD=6
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6226, HardwareVer:8A02, SoftwareVer:8A01
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 0098004900000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: 007243_420_V4002
Changing baudrate to 921600...
Done.
Analysis the UID-Encryption info, Some file may need a long time...
Decryption complete. Key[52357960127F512C]-BB
Downloading Flash file...
All Done.