GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=2
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 0098005F00000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: PN-SC_1V8_CN_LLNUMLD_224_YYMMDD_CAM_MCPMCP_O
Changing baudrate to 921600...
Done.
Reading full Flash...
All Done.

NX-915 FORMATT
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=2
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 0098005F00000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: PN-SC_1V8_CN_LLNUMLD_224_YYMMDD_CAM_MCPMCP_O
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x01C00000, size=0x003E0000
All Done

MITO 302 READ
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=16 TXD=18
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: CBM68B_ZH_V249
Changing baudrate to 921600...
Done.
Reading full Flash...
All Done.

MITO 302 FORMATT
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=16 TXD=18
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: CBM68B_ZH_V249
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
NX-G522 READ
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=18 TXD=16
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: E505E.PR1.V8
Changing baudrate to 921600...
Done.
Reading full Flash...
All Done.


NX-G522 FORMATT
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=18 TXD=16
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: E505E.PR1.V8
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x001FC000
All Done

MITO 2000 READ
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=16 TXD=18
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: CBM68_1_2_ZH_CEI_V8
Changing baudrate to 921600...
Done.
Reading full Flash...
All Done.

MITO 2000 FORMATT
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=16 TXD=18
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: CBM68_1_2_ZH_CEI_V8
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done

K-TOUCH B830 FLASH
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=5 TXD=6
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6226, HardwareVer:8A02, SoftwareVer:8A01
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 0098004900000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: 007243_420_V4002
Changing baudrate to 921600...
Done.
Analysis the UID-Encryption info, Some file may need a long time...
Decryption complete. Key[52357960127F512C]-BB
Downloading Flash file...
All Done.
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

MTK6225FORMAT.jpg

GPGDragon test MTK FLash K5L2833 Auto Format
tip: K5L2833 auto format need use 3.952 boot
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM42
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700038A3A000_01
Wait for init SB...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_INTEL_3040L0xx0
Set FLASH Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 0A
IMEI 1=35xxxxxxxxxxxxx
IMEI 2=35xxxxxxxxxxxxx
--------NOR_FLASH_CONFIG--------
Flash Bank count=16
EFS sector count=7
File sector count=0
Sector size=0x00020000
Flash start addr=0x00000000
Flash size=0x01000000
Fix NV addr=0x00EE0000
Product information addr=0x00FE0000
MMI resource addr=0x00A00000
------Auto Format Address-------
Start=0x00F00000
Size =0x000E0000
Read FS info...done
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=6 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC227E22632260
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: MAUI.07B.W08.16.MP.V4
Changing baudrate to 921600...
Done.
Reading full Flash...
All Done.

VITEL V710 FORMATT
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=6 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC227E22632260
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: MAUI.07B.W08.16.MP.V4
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x01C00000, size=0x00400000
All Done
================
GSTAR 388 READ
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=19 TXD=20
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: LBF4204.8.12.1.0T01M0514_M571
Changing baudrate to 921600...
Done.
Reading full Flash...
All Done.

GSTAR 388 FORMATT
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=19 TXD=20
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: LBF4204.8.12.1.0T01M0514_M571
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done

GSTAR 899 READ
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=7 TXD=9
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 002088C400000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: MAUI.08B.W08.52.MP.V2.090905
Changing baudrate to 921600...
Done.
Reading full Flash...
All Done.

GSTAR 899 FORMATT
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=7 TXD=9
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 002088C400000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: MAUI.08B.W08.52.MP.V2.090905
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done

SKYBEE 83RY
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=7 TXD=9
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC257E25082501
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: X201_4A_83RY_FM_V107_100521
Changing baudrate to 921600...
Done.
Reading full Flash...
All Done.

SKYBEE 83RY
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=7 TXD=9
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC257E25082501
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: X201_4A_83RY_FM_V107_100521
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=5 TXD=6
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: MAUI.GEMINI.W08.12
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done

successfully format and mobile alive
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

D-=23 D+=22
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM6
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700138E3A000_01
Wait for init SB...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 115200 ok
Reading phone HW info...
Read info is done.
CPU: 66007001 Flash: NOR_S29GL064A_T
Set FLASH Parameters...
Settings have been completed!
Connect and search Security Code...
PhoneLock: 7890
Privacy protect: 1122
Done.
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

MTK 6226 dead done

Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=6 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6226, HardwareVer:8A02, SoftwareVer:8A01
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: T9021_JH_02_7.0T11_090421
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast...
D-=17 D+=19
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM39
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700538E3A000_01
Wait for init SB...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_ST_M58WR064HU
Set FLASH Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x007A0000, Size=0x00050000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.
 
You must log in or register to reply here.
Prev Thread | Next Thread
Back
Top