GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
i receive 16gb iphone clone 2 week's ago , i tried to format it on spiderman but i failed
i attempt 5x but the problem insist..
then i receive my great gpg dragon today and you know what??
this tool give me solution about my iphone clone
i receive 16gb iphone clone 2 week's ago , i tried to format it on spiderman but i failed
i attempt 5x but the problem insist..
then i receive my great gpg dragon today and you know what??
this tool give me solution about my iphone clone
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=20 TXD=18
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6205, HardwareVer:8B00, SoftwareVer:8B00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0001227E221A2201
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID:
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x003C0000, size=0x00040000
All Done
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=20 TXD=18
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6205, HardwareVer:8B00, SoftwareVer:8B00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0001227E221A2201
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID:
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x003C0000, size=0x00040000
All Done
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
Analysis the file...
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM29
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700038A3A000_01
Wait for init SB...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_INTEL_3040L0xx0
Set FLASH Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Downloading Flash...
All Done.
Analysis the file...
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM29
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700038A3A000_01
Wait for init SB...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_INTEL_3040L0xx0
Set FLASH Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Downloading Flash...
All Done.
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=6 TXD=5
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6226, HardwareVer:8A02, SoftwareVer:8A01
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 0001227E22202200
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: P900_1.01B_XXXX0V0SP75BTF
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=6 TXD=5
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6226, HardwareVer:8A02, SoftwareVer:8A01
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 0001227E22202200
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: P900_1.01B_XXXX0V0SP75BTF
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=19 TXD=22
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC257E25082501
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: H9_128X64_V1.16
Changing baudrate to 921600...
Done.
Reading full Flash...
All Done.
NX-T910 FORMATT
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=19 TXD=22
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC257E25082501
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: H9_128X64_V1.16
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=19 TXD=22
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC257E25082501
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: H9_128X64_V1.16
Changing baudrate to 921600...
Done.
Reading full Flash...
All Done.
NX-T910 FORMATT
Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=19 TXD=22
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC257E25082501
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: H9_128X64_V1.16
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=2
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0001227E223C2200
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: FlyB430DS_125622_6512_V1402
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x01000000, size=0x01000000
All Done
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=2
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0001227E223C2200
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: FlyB430DS_125622_6512_V1402
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x01000000, size=0x01000000
All Done
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
D-=17 D+=19
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM143
Connected...sending boot...
FDL test...OK
ArmBootMode: 660080002C42A0FF_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600R Flash: NAND_HY27XS08121M
Set FLASH Parameters...
Settings have been completed!
Connect and search Security Code...
Privacy protect: 1234
Done.
Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
D-=17 D+=19
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM143
Connected...sending boot...
FDL test...OK
ArmBootMode: 660080002C42A0FF_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600R Flash: NAND_HY27XS08121M
Set FLASH Parameters...
Settings have been completed!
Connect and search Security Code...
Privacy protect: 1234
Done.
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
MY FIRST PHONE WITH GPG DRAGON!!!!!
Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
D-=9 D+=8
Searching commport...please wait...
Spd USB-to-Serial=COM4
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 660080002C42A0FF_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600R Flash: NAND_HY27XS08121M
Set FLASH Parameters...
Settings have been completed!
Connect and search Security Code...
PhoneLock: 00001974
Privacy protect: 1234
Done.
MY FIRST PHONE WITH GPG DRAGON!!!!!
Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
D-=9 D+=8
Searching commport...please wait...
Spd USB-to-Serial=COM4
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 660080002C42A0FF_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600R Flash: NAND_HY27XS08121M
Set FLASH Parameters...
Settings have been completed!
Connect and search Security Code...
PhoneLock: 00001974
Privacy protect: 1234
Done.
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
RXD=22 TXD=24
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700500006A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_TV00560002EDGB
Set FLASH Parameters...
Settings have been completed!
Connect and search Security Code...
PhoneLock: 9028
Privacy protect: 1122
PhoneLock: 44441
Done.
Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
RXD=22 TXD=24
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700500006A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_TV00560002EDGB
Set FLASH Parameters...
Settings have been completed!
Connect and search Security Code...
PhoneLock: 9028
Privacy protect: 1122
PhoneLock: 44441
Done.