GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

SPRINT_M5
Initializing...
DA_LIB_VER_3.6.0.0
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6253, HardwareVer:8A00, SoftwareVer:8A04
Loading boot...
Boot init completed.
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Reading phone HW info...
Read info is done.
BB: MT6253T Flash: NOR_S29VS128R_T
setting the Flash Parameters...
Settings have been completed!
Changing baudrate...
Set baudrate to 460800 ...ok
Analysis the file, Some file may need a long time...
The file has not been encrypted.
Unlocking all blocks before program/erase...
Unlock Done.
Programming...
Compare Image: Enable
All Done.
Click to expand...

201109131622gpgdragonv.jpg
 
Initializing...
DA_LIB_VER_3.6.0.2
It is sensing the pinout fast...
RXD=16 TXD=18
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700500006A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L3 Flash: NOR_K5L2731CAM
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x00F00000, Size=0x000E0000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.
Click to expand...


201109171608gpgdragonv.jpg
 
Initializing...
DA_LIB_VER_3.6.0.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=2 TXD=3
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 002088BA00000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI(Nor Flash only)...
H/W detection ok.
Get Project ID from phone...
Project ID: D386.SW.V00.01.YIDALONG
Changing baudrate to 230400...
Done.
Formatting Flash...
AutoFormat address: start=0x003B0000, size=0x00050000
All Done
Click to expand...

201109221628gpgdragonv.jpg
 
symphony d60
Initializing...
DA_LIB_VER_3.6.0.2
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=16 TXD=18
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6253, HardwareVer:8A00, SoftwareVer:8A04
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
Code=200911
Code=88899
Click to expand...

201109251513gpgdragonv.jpg
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Mstar chip phone code done
15qbzup.jpg

​
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Read full flash
kdk18h.jpg

​
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Read info
2rdyngk.jpg

​
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Samsung E2120/E2121b Blinking/Restart Problem Successfully


1.Open Freewaretool
2.Scan,auto,chip sense(once phone detected)
3.Run freesoft,select comport/settings

Freewaretool:
E2120.jpg


Freesoft settings
​
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Initializing...
DA_LIB_VER_3.6.7.1
It is sensing the pinout fast,please hold on the phone Power key
RXD=23 TXD=13
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC225400000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI(Nor Flash only)...
H/W detection ok.
Get Project ID from phone...
Project ID: L160D_9EA0_V8_0_4
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00740000, size=0x000C0000
All Done
​
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Initializing...
DA_LIB_VER_2.4.4.7
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM11
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700138E3A000_01
Wait for init SB...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: 66007001 Flash: NOR_TV00570002xDGB
Set FLASH Parameters...
Settings have been completed!
Connect and search Security Code...
Privacy protect: 258456
Done.
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

again Privacy protect read Fast and safe


Initializing...
DA_LIB_VER_2.4.4.7
It is sensing the pinout fast...
D-=2 D+=3
Searching commport...please wait...
Spd USB-to-Serial=COM11
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700038A3A000_01
Wait for init SB...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_S71PL127N
Set FLASH Parameters...
Settings have been completed!
Connect and search Security Code...
Theft proof: 381274
Privacy protect: 6657
PhoneLock: 4748
Done.
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

iphone 5 change imei done



DA_LIB_VER_2.4.4.7
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=1 TXD=2
Connecting...Please hold on the ON/OFF key...
Connecting, Please turn on the phone...
Connected! Checking IMEI...
Original IMEI 1= 135790246811220
IMEI 1 rebuild has been implemented: 350092755668990
Original IMEI 2= 135790246811220
IMEI 2 rebuild has been implemented: 350092755668998
Need to restart the phone to verify new imei.
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

SC6600L/WT6226A

Initializing...
DA_LIB_VER_2.4.4.7
It is sensing the pinout fast...
D-=8 D+=9
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM11
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700538E3A000_01
Wait for init SB...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_ST_M30L0T7000T0
Set FLASH Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x00EA0000, Size=0x00140000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

MTK 6226



DA_LIB_VER_2.4.4.4
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=5 TXD=6
Connecting...Please hold on the ON/OFF key...
Connecting, Please turn on the phone...
Connected! Checking IMEI...
Original IMEI 1= 135790246811220
IMEI 1 rebuild has been implemented: 350093566778999
Need to restart the phone to verify new imei.
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

torque dl85 BB:6223










Initializing...
DA_LIB_VER_2.4.4.7
It is sensing the pinout fast,please hold on the phone

Power key
RXD=5 TXD=4
Connecting...Please hold on the POWER key until the red

gauge is going...
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0001227E22212201
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: C26_HX_QCIF_NT_ML7_V1.0.0
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
 
You must log in or register to reply here.
Prev Thread | Next Thread
Back
Top