GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

nokia e72 invalid sim successfully rebuild emei

read info

Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=22 TXD=23
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A03, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0001227E22202200
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: MAUI.GEMINI.W08.12.F2

read flash

Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=22 TXD=23
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A03, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0001227E22202200
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: MAUI.GEMINI.W08.12.F2
Changing baudrate to 921600...
Done.
Reading full Flash...
All Done.

emei rebuild

Initializing...
DA_LIB_VER_3.2.0.7
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=22 TXD=23
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A03, SoftwareVer:8A00
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
IMEI=135790246811220
IMEI=135790246811220
IMEI=353056077462179
IMEI=353056077462179
IMEI=353056077462179
IMEI=353056077462179
IMEI=353056077462179
IMEI=353056077462179
IMEI=353056077462179
IMEI=353056077462179
IMEI=353056077462179
IMEI=353056077462179
IMEI=353056077462179
IMEI=353056077462179
IMEI=353056077462179
IMEI=353056077462179
IMEI=353056077462179
Rebulid IMEI1=353056157583043
Rebulid IMEI2=353056077462179
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

6300 SPD blink problem
read_back_up
62794735.jpg


Reset Done
76358718hc.jpg
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

YXTEL Z90 USERCODE READ[SPD CPU] Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
RXD=6 TXD=7
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700500006A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_TV00570002xDGB
setting the Flash Parameters...
Settings have been completed!
Connect and search Security Code...
Privacy protect: 1
Privacy protect: 0
PhoneLock: 006
Theft proof: 123456
PhoneLock: 039
PhoneLock: 12345
PhoneLock: 004
PhoneLock: 009
PhoneLock: 003
Privacy protect: 1234
PhoneLock: 2525
Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

ITEL X2 USER CODE REMOVE DONE

Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=7 TXD=9
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 007F227E220A2201
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: CY-X2_2012-32v01.01b05


Initializing...
DA_LIB_VER_3.2.0.7
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=7 TXD=9
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
Code=9728
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Nktel 2008 flash done Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=23 TXD=5
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: N96_P11_TOSHIBA_S5LCD_V1.0.2
Changing baudrate to 921600...
Done.
Analyzing the UID-Encryption info, Some file may need a long time...
Decryption complete. Key[B234D95C1264C544]-B9
Downloading Flash file...
All Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

A2008 Formate
Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=4 TXD=3
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC240200000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: N96_P15_K5L_S5T2220_V1.3.5
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

G-five u808 dead alive just format Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=5 TXD=6
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: B017.COMP_MCP.GFIVE.FAT.13



Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=5 TXD=6
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: B017.COMP_MCP.GFIVE.FAT.13
Changing baudrate to 921600...
Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

LAWOW F100 FLASHING DONE, NOW MY PHONE IS A LIVE !!!!!

read info done!!!!
Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
D-=2 D+=3
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM324
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700900025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: 66007009 Flash: NOR_K5L6331CAA
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 0A
IMEI 1=356013040068648
IMEI 2=356013040068663
--------NOR_FLASH_CONFIG--------
Flash Bank count=1
EFS sector count=4
File sector count=0
Sector size=0x00010000
Flash start addr=0x00000000
Flash size=0x00800000
Fix NV addr=0x00760000
Product information addr=0x007F0000
MMI resource addr=0x000003B0
------Auto Format Address-------
Start=0x00770000
Size =0x00080000
Read FS info...done

wrhite fullflash done!!!!


Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
D-=2 D+=3
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM324
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700900025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: 66007009 Flash: NOR_K5L6331CAA
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Programming...
Compare Image: Enable
All Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

gn598 FLASH READ OK

Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=15 TXD=16
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 0098009E00000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: W598_GNEXT_L7E_V108_110114_DZ

rEAD

Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=15 TXD=16
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 0098009E00000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: W598_GNEXT_L7E_V108_110114_DZ
Changing baudrate to 921600...
Done.
Reading full Flash...
All Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

GFIVE READ FLASH OK

Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=19 TXD=20
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 00EC240400000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: L5BMM45.9.52.1.0T02M1029_M713


rEAD

Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=19 TXD=20
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 00EC240400000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: L5BMM45.9.52.1.0T02M1029_M713
Changing baudrate to 921600...
Done.
Reading full Flash...
All Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Nokia C7 done with formatting

Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
D-=4 D+=3
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM13
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700500025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_ST_M58WR064KT
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x00790000, Size=0x00060000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Bluetooth 5130d read flash
readifo

Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
RXD=3 TXD=1
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100026A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_TV00560002EDGB
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 0A
IMEI 1=35522
IMEI 2=3552210
--------NOR_FLASH_CONFIG--------
Flash Bank count=1
EFS sector count=4
File sector count=0
Sector size=0x00010000
Flash start addr=0x00000000
Flash size=0x00800000
Fix NV addr=0x007A0000
Product information addr=0x007F0000
MMI resource addr=0x00620000
------Auto Format Address-------
Start=0x007B0000
Size =0x00040000
Read FS info...done

flash

Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
RXD=3 TXD=1
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100026A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_TV00560002EDGB
setting the Flash Parameters...
Settings have been completed!
Reading Flash...
Retry=00000001
All Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

zong zte r221 Flash flash


Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=2
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC257E25082501
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: E-PK-T9SM-P109A17V1.0.0B02
Changing baudrate to 921600...
Done.
Analyzing the UID-Encryption info, Some file may need a long time...
The file has not been encrypted.
Downloading Flash file...
All Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Mini A2100 Format Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=5 TXD=6
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: B017.COMP_MCP.GFIVE.FAT.13


Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=5 TXD=6
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: B017.COMP_MCP.GFIVE.FAT.13
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

B22 DUO lock code

Initializing...
DA_LIB_VER_3.2.0.7
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=1 TXD=10
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A03, SoftwareVer:8A00
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
Code=3626
 
You must log in or register to reply here.
Prev Thread | Next Thread
Back
Top