GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
NKTEL A200 Flash Done
Initializing...
DA_LIB_VER_3.2.0.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=5 TXD=8
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: N66_ABROAD_5CDGB_S5LCD_V1.5.8
Changing baudrate to 921600...
Done.
Analyzing the UID-Encryption info, Some file may need a long time...
Decryption complete. Key[B234D95C127933D0]-B9
Downloading Flash file...
All Done.
NKTEL A200 Flash Done
Initializing...
DA_LIB_VER_3.2.0.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=5 TXD=8
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: N66_ABROAD_5CDGB_S5LCD_V1.5.8
Changing baudrate to 921600...
Done.
Analyzing the UID-Encryption info, Some file may need a long time...
Decryption complete. Key[B234D95C127933D0]-B9
Downloading Flash file...
All Done.
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
C8+ C Right formate
Initializing...
DA_LIB_VER_3.2.0.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=10 TXD=11
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 002088C400000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: A19V4.1_ANX_M8_T3SPWO_V17
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
C8+ C Right formate
Initializing...
DA_LIB_VER_3.2.0.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=10 TXD=11
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 002088C400000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: A19V4.1_ANX_M8_T3SPWO_V17
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
6233 unlock done
Initializing...
DA_LIB_VER_3.2.0.4
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM24
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700000005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_ST_M58WR064HU
setting the Flash Parameters...
Settings have been completed!
Connect and search Security Code...
PhoneLock: 000
Privacy protect: 9573
PhoneLock: 1234
Done.
6233 unlock done
Initializing...
DA_LIB_VER_3.2.0.4
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM24
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700000005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_ST_M58WR064HU
setting the Flash Parameters...
Settings have been completed!
Connect and search Security Code...
PhoneLock: 000
Privacy protect: 9573
PhoneLock: 1234
Done.
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
Saga E71DD MTK Format done Initializing...
DA_LIB_VER_3.2.0.5
It is sensing the pinout fast,please hold on the phone Power key
RXD=18 TXD=20
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC257E25062501
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: L166_DT03_QQCF_SAGA_Y04_V03
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00700000, size=0x00100000
All Done
Saga E71DD MTK Format done Initializing...
DA_LIB_VER_3.2.0.5
It is sensing the pinout fast,please hold on the phone Power key
RXD=18 TXD=20
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC257E25062501
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: L166_DT03_QQCF_SAGA_Y04_V03
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00700000, size=0x00100000
All Done
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
LG-195 Done read flash file
Initializing...
DA_LIB_VER_3.2.0.5
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=2
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6226, HardwareVer:8A02, SoftwareVer:8A01
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 0098004900000000
Nand Flash ID: 009800F000800095
Read Hardware Information is done.
Get Project ID from phone...
Project ID: 7S7332SA00-001-R1C
Changing baudrate to 921600...
Done.
Reading full Flash...
All Done.
format
Initializing...
DA_LIB_VER_3.2.0.5
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=2
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6226, HardwareVer:8A02, SoftwareVer:8A01
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 0098004900000000
Nand Flash ID: 009800F000800095
Read Hardware Information is done.
Get Project ID from phone...
Project ID: 7S7332SA00-001-R1C
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
Unlock
Initializing...
DA_LIB_VER_3.2.0.5
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=2
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6226, HardwareVer:8A02, SoftwareVer:8A01
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
Code=0000
LG-195 Done read flash file
Initializing...
DA_LIB_VER_3.2.0.5
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=2
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6226, HardwareVer:8A02, SoftwareVer:8A01
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 0098004900000000
Nand Flash ID: 009800F000800095
Read Hardware Information is done.
Get Project ID from phone...
Project ID: 7S7332SA00-001-R1C
Changing baudrate to 921600...
Done.
Reading full Flash...
All Done.
format
Initializing...
DA_LIB_VER_3.2.0.5
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=2
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6226, HardwareVer:8A02, SoftwareVer:8A01
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 0098004900000000
Nand Flash ID: 009800F000800095
Read Hardware Information is done.
Get Project ID from phone...
Project ID: 7S7332SA00-001-R1C
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
Unlock
Initializing...
DA_LIB_VER_3.2.0.5
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=2
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6226, HardwareVer:8A02, SoftwareVer:8A01
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
Code=0000
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
Gfinve 6700i spd chip blinking solved!! Gfinve 6700i spd chip blinking solved with reset button thnx GPG team..!
Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
D-=17 D+=19
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM81
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_ST_M58WR064KT
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Analyzing FileSystem...
Done.
Reset the user data area...
Note: if user partition size is more than 4MB, The phone would may take 1 minute to rebuild FileSystem after Reset Action.
All Done.
Gfinve 6700i spd chip blinking solved!! Gfinve 6700i spd chip blinking solved with reset button thnx GPG team..!
Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
D-=17 D+=19
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM81
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_ST_M58WR064KT
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Analyzing FileSystem...
Done.
Reset the user data area...
Note: if user partition size is more than 4MB, The phone would may take 1 minute to rebuild FileSystem after Reset Action.
All Done.
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=2 TXD=3
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC240200000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: LB0MMB3.8.32.1.0T03M0412_M511
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=2 TXD=3
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC240200000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: LB0MMB3.8.32.1.0T03M0412_M511
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
Grite G40 SPD Done [COLOR=*****Brown]read flash[/COLOR]
Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
D-=2 D+=3
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM5
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_S29GL064A_T
setting the Flash Parameters...
Settings have been completed!
Reading Flash...
All Done.
[COLOR=*****Brown]Reset [/COLOR]
Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
D-=2 D+=3
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM5
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_S29GL064A_T
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Analyzing FileSystem...
Done.
Reset the user data area...
Note: if user partition size is more than 4MB, The phone would may take 1 minute to rebuild FileSystem after Reset Action.
All Done.
[COLOR=*****Brown]Format[/COLOR]
Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
D-=2 D+=3
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM5
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_S29GL064A_T
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x007C0000, Size=0x00030000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.
Grite G40 SPD Done [COLOR=*****Brown]read flash[/COLOR]
Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
D-=2 D+=3
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM5
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_S29GL064A_T
setting the Flash Parameters...
Settings have been completed!
Reading Flash...
All Done.
[COLOR=*****Brown]Reset [/COLOR]
Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
D-=2 D+=3
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM5
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_S29GL064A_T
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Analyzing FileSystem...
Done.
Reset the user data area...
Note: if user partition size is more than 4MB, The phone would may take 1 minute to rebuild FileSystem after Reset Action.
All Done.
[COLOR=*****Brown]Format[/COLOR]
Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
D-=2 D+=3
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM5
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_S29GL064A_T
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x007C0000, Size=0x00030000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
Qmobile E400 Restart Problem Solved read flash
Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=1 TXD=10
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: E400-PK.FM.V1.0
Changing baudrate to 921600...
Done.
Reading full Flash...
All Done.
Format
Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=1 TXD=10
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: E400-PK.FM.V1.0
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x001F0000
All Done
Unlock
Initializing...
DA_LIB_VER_3.2.0.7
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=1 TXD=10
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
Code=1122
Qmobile E400 Restart Problem Solved read flash
Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=1 TXD=10
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: E400-PK.FM.V1.0
Changing baudrate to 921600...
Done.
Reading full Flash...
All Done.
Format
Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=1 TXD=10
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: E400-PK.FM.V1.0
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x001F0000
All Done
Unlock
Initializing...
DA_LIB_VER_3.2.0.7
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=1 TXD=10
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
Code=1122
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
C8000+ MTK chip
Calibration on screen
Done via calibrate
Calibration manual for MTK chips
1-Make info
2-Make back-up just incase
3-Do format
4-Tracker
5-Do calibrate with provided files
6-All done
Here:
C8000+ MTK chip
Calibration on screen
Done via calibrate
Calibration manual for MTK chips
1-Make info
2-Make back-up just incase
3-Do format
4-Tracker
5-Do calibrate with provided files
6-All done
Here: