GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
E78 flash successfully flashed
Initializing...
DA_LIB_VER_3.2.0.4
It is sensing the pinout fast...
D-=6 D+=4
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM24
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700500005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_ST_M58WR064KT
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Buffer Program: Enable
Unlock Done.
Programming...
Compare Image: Enable
All Done.
E78 flash successfully flashed
Initializing...
DA_LIB_VER_3.2.0.4
It is sensing the pinout fast...
D-=6 D+=4
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM24
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700500005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_ST_M58WR064KT
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Buffer Program: Enable
Unlock Done.
Programming...
Compare Image: Enable
All Done.
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
Initializing...
DA_LIB_VER_3.2.0.7
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=6 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
IMEI=135790246811220
IMEI=135790246811220
Rebulid IMEI1=353056224366568
Rebulid IMEI2=353056335719623
Initializing...
DA_LIB_VER_3.2.0.7
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=6 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
IMEI=135790246811220
IMEI=135790246811220
Rebulid IMEI1=353056224366568
Rebulid IMEI2=353056335719623
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
G'Five sucessfully format and imei rebuild
Model G'Five F11 connector L12C
Initializing...
DA_LIB_VER_3.2.0.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 007F227E220A2201
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: KACM7026DJWT_HA_2.02.720
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00380000, size=0x00080000
All Done
G'Five Imei write done
Initializing...
DA_LIB_VER_3.2.0.2
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
Unable to locate LID, Force write...
Lid=0x2_0x0056, Val=53036509873183000000
Lid=0x1_0x0056, Val=FFFFFFFFFFFFFF0F0000
Lid=0x2_0x0095, Val=53036509873183000000
Lid=0x1_0x0095, Val=00000000000000000000
All done.
G'Five sucessfully format and imei rebuild
Model G'Five F11 connector L12C
Initializing...
DA_LIB_VER_3.2.0.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 007F227E220A2201
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: KACM7026DJWT_HA_2.02.720
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00380000, size=0x00080000
All Done
G'Five Imei write done
Initializing...
DA_LIB_VER_3.2.0.2
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
Unable to locate LID, Force write...
Lid=0x2_0x0056, Val=53036509873183000000
Lid=0x1_0x0056, Val=FFFFFFFFFFFFFF0F0000
Lid=0x2_0x0095, Val=53036509873183000000
Lid=0x1_0x0095, Val=00000000000000000000
All done.
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
Nasaki B2 format sucessfully
Model Nasaki B2
Initializing...
DA_LIB_VER_3.2.0.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=9 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 00EC240400000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: C100A0.XT.NASAKI01.101028.02
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
Nasaki B2 format sucessfully
Model Nasaki B2
Initializing...
DA_LIB_VER_3.2.0.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=9 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 00EC240400000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: C100A0.XT.NASAKI01.101028.02
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
Gright model x600
format done
Initializing...
DA_LIB_VER_3.2.0.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=9 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC240200000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: S200DJCRF10_3EA0_V1_0_6
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
Gright model x600
format done
Initializing...
DA_LIB_VER_3.2.0.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=9 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC240200000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: S200DJCRF10_3EA0_V1_0_6
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
Leophone 6233 condition hang on logo
Initializing...
DA_LIB_VER_3.2.0.2
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM175
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700500005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 230400 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_ST_M58WR064HU
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x007A0000, Size=0x00050000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.
Leophone 6233 condition hang on logo
Initializing...
DA_LIB_VER_3.2.0.2
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM175
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700500005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 230400 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_ST_M58WR064HU
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x007A0000, Size=0x00050000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
MTK 6253 repaire imei success 100%
Initializing...
DA_LIB_VER_3.2.0.7
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=10 TXD=9
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
IMEI=353056538843884
IMEI=353056262912012
Unable to locate LID, Force write...
Lid=0x2_0x0056, Val=5376025031AAAAFA0000
Lid=0x2_0x0095, Val=00000000000000000000
All done.
MTK 6253 repaire imei success 100%
Initializing...
DA_LIB_VER_3.2.0.7
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=10 TXD=9
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
IMEI=353056538843884
IMEI=353056262912012
Unable to locate LID, Force write...
Lid=0x2_0x0056, Val=5376025031AAAAFA0000
Lid=0x2_0x0095, Val=00000000000000000000
All done.
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
F100 flash done
Initializing...
DA_LIB_VER_3.2.0.4
It is sensing the pinout fast...
D-=2 D+=3
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM15
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700900025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: 66007009 Flash: NOR_K5L6331CAA
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Programming...
Compare Image: Enable
All Done.
F100 flash done
Initializing...
DA_LIB_VER_3.2.0.4
It is sensing the pinout fast...
D-=2 D+=3
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM15
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700900025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: 66007009 Flash: NOR_K5L6331CAA
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Programming...
Compare Image: Enable
All Done.
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
Dead ZTC 6233 done with reset
Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
D-=7 D+=10
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM15
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_ST_M58WR064KT
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Analyzing FileSystem...
Done.
Reset the user data area...
Note: if user partition size is more than 4MB, The phone would may take 1 minute to rebuild FileSystem after Reset Action.
All Done.
Dead ZTC 6233 done with reset
Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
D-=7 D+=10
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM15
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_ST_M58WR064KT
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Analyzing FileSystem...
Done.
Reset the user data area...
Note: if user partition size is more than 4MB, The phone would may take 1 minute to rebuild FileSystem after Reset Action.
All Done.