GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

my phone

Initializing...
DA_LIB_VER_3.2.0.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=24 TXD=15
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A03, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0001227E22202200
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: X90.61503-PH-PR-V0.54
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x001F0000
All Done
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
D-=10 D+=7
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM5
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_TV00560002EDGB
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 0A
IMEI 1=354544047055636
IMEI 2=354544047055644
--------NOR_FLASH_CONFIG--------
Flash Bank count=1
EFS sector count=15
File sector count=0
Sector size=0x00010000
Flash start addr=0x00000000
Flash size=0x00800000
Fix NV addr=0x006F0000
Product information addr=0x007F0000
MMI resource addr=0x00600000
------Auto Format Address-------
Start=0x00700000
Size =0x000F0000
Read FS info...done

Read Flash

Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
D-=10 D+=7
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM5
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_TV00560002EDGB
setting the Flash Parameters...
Settings have been completed!
Reading Flash...
All Done.


Reset

Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
D-=10 D+=7
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM5
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_TV00560002EDGB
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Analyzing FileSystem...
Done.
Reset the user data area...
Note: if user partition size is more than 4MB, The phone would may take 1 minute to rebuild FileSystem after Reset Action.
All Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

F800 Format done Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
RXD=4 TXD=5
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100006A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 460800 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_ST_M30L0T7000T0
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x00F00000, Size=0x000E0000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Lawow F100 flash done

Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
D-=2 D+=3
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM22
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700900005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: 66007009 Flash: NOR_K5L6331CAA
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Programming...
Compare Image: Enable
All Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

spreadtrum
boot : 6600L/WT6226-COM
Initializing...
DA_LIB_VER_3.2.0.5
It is sensing the pinout fast...
RXD=4 TXD=7
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700900006A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: 66007009 Flash: NOR_ST_M58WR064KT
setting the Flash Parameters...
Settings have been completed!
Connect and search Security Code...
PhoneLock: 282
Privacy protect: 1234
PhoneLock: 124
PhoneLock: 10443
Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

spd 6700i blinking done !! Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
D-=2 D+=3
Searching commport...please wait...
Spd USB-to-Serial=COM12
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_ST_M58WR064KT
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Analyzing FileSystem...
Done.
Reset the user data area...
Note: if user partition size is more than 4MB, The phone would may take 1 minute to rebuild FileSystem after Reset Action.
All Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

reset spreadtum
boot: 6600L/WT6226-COM

Initializing...
DA_LIB_VER_3.2.0.5
It is sensing the pinout fast...
RXD=4 TXD=7
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700900006A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: 66007009 Flash: NOR_ST_M58WR064KT
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Analyzing FileSystem...
Done.
Reset the user data area...
Note: if user partition size is more than 4MB, The phone would may take 1 minute to rebuild FileSystem after Reset Action.
All Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

G write L300 READ INFO

Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=6 TXD=5
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: M.RK3230436.M28202.V1.2.0.0M0309


read flash


Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=6 TXD=5
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: M.RK3230436.M28202.V1.2.0.0M0309
Changing baudrate to 921600...
Done.
Reading full Flash...
All Done.


format

Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=6 TXD=5
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: M.RK3230436.M28202.V1.2.0.0M0309
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

e73 lock code

Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
RXD=5 TXD=3
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100026A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 115200 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_TV00570002xDGB
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Analyzing FileSystem...
Done.
Reset the user data area...
Note: if user partition size is more than 4MB, The phone would may take 1 minute to rebuild FileSystem after Reset Action.
All Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

U808
Read Info

Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=6 TXD=5
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: A310.V02.EnFrArPeTrSpInRuPtUr.Gf

Read Flash

Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=6 TXD=5
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: A310.V02.EnFrArPeTrSpInRuPtUr.Gf
Changing baudrate to 921600...
Done.
Reading full Flash...
All Done.


Format

Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=6 TXD=5
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: A310.V02.EnFrArPeTrSpInRuPtUr.Gf
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done


Unlock

Initializing...
DA_LIB_VER_3.2.0.7
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=6 TXD=5
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
Code=1234
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Nokia n8 copy china phone read flash&imei rebuild done with dragon
28042009020.jpg


1-8.jpg


002-5.jpg


003-3.jpg


004-3.jpg


005-3.jpg


006-2.jpg


007-2.jpg


008.jpg


009.jpg
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Pine King blinking solved !! Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=19 TXD=17
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0001227E22102201
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: LKATO01.8.5.1.0T04G0507_M512
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00700000, size=0x00100000
All Done
 
You must log in or register to reply here.
Prev Thread | Next Thread
Back
Top