GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

[Jonab Ru]

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

6700i spd chip reset done Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM38
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_ST_M58WR064KT
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Analyzing FileSystem...
Done.
Reset the user data area...
Note: if user partition size is more than 4MB, The phone would may take 1 minute to rebuild FileSystem after Reset Action.
All Done.

 

[Jonab Ru]

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

another 1 6700i spd chip reset done Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM38
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_ST_M58WR064KT
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Analyzing FileSystem...
Done.
Reset the user data area...
Note: if user partition size is more than 4MB, The phone would may take 1 minute to rebuild FileSystem after Reset Action.
All Done.

 

[Jonab Ru]

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

3rd 6700i spd rest done 3rd pec. in a day Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM38
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_ST_M58WR064KT
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Analyzing FileSystem...
Done.
Reset the user data area...
Note: if user partition size is more than 4MB, The phone would may take 1 minute to rebuild FileSystem after Reset Action.
All Done.

 

[Jonab Ru]

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

MICROMAX X600 RAED INFO

Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=22 TXD=23
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6235, HardwareVer:8A01, SoftwareVer:8A04
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0000000000000000
Nand Flash ID: 009800D100900015
Read Hardware Information is done.
Get Project ID from phone...
Project ID: 204210_6910_V1315
Changing baudrate to 921600...
Done.
Reading full Flash...
All Done.

 

[Jonab Ru]

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

MICROMAX X250 READ INFO

 

[Jonab Ru]

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

GFIVE M33 READ & FLASH INFO

read flash
Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=5 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0001227E22202200
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: GEWOO_B2410_SPANSION_S71PL127NB0HHW4U_V46
Changing baudrate to 921600...
Done.
Reading full Flash...
All Done.

 

[Jonab Ru]

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

n99 tv format through rj45

Initializing...
DA_LIB_VER_3.2.0.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=5 TXD=3
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A03, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0001227E22202200
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: LBN8402.7.12.1.2T06M0131_M401A.M
Changing baudrate to 115200...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done

 

[Jonab Ru]

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=7 TXD=9
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0001227E22202200
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: E808_PR1_V9.0_India
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x001F0000
All Done

 

[Jonab Ru]

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Dead g five 6120c done

Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
D-=7 D+=10
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM14
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_ST_M58WR064KT
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x00790000, Size=0x00060000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.

 

[Jonab Ru]

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

[COLOR=*****brown]PHONE MODEL:Q-MOBILE Q17[/COLOR]
[COLOR=*****brown]CPU:SPD SC6600L2[/COLOR]
[COLOR=*****brown]MOBILE ETATHONE LOCK[/COLOR]
[COLOR=*****brown]STATUT:READ CODE[/COLOR]

Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
D-=8 D+=9
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM342
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_ST_M58WR064KT
setting the Flash Parameters...
Settings have been completed!
Connect and search Security Code...
PhoneLock: 0553
PhoneLock: 0554
PhoneLock: 0531
PhoneLock: 0911
PhoneLock: 0891
Privacy protect: 1122
PhoneLock: 25863
Theft proof: 258963
Done.

 

[Jonab Ru]

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

T218 SPD CPU succes
Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
RXD=7 TXD=8
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700900006A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: 66007009 Flash: NOR_ST_M58WR064KT
setting the Flash Parameters...
Settings have been completed!
Connect and search Security Code...
Privacy protect: 0
PhoneLock: 0336741
Privacy protect: 1234
PhoneLock: 78645
PhoneLock: 138
PhoneLock: 139
Done.

 

[Jonab Ru]

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

2730 unlock done

Initializing...
DA_LIB_VER_3.2.0.4
It is sensing the pinout fast...
RXD=17 TXD=23
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700500026A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_S29GL064A_T
setting the Flash Parameters...
Settings have been completed!
Connect and search Security Code...
PhoneLock: 97654310
Theft proof: 333333
Privacy protect: 1234
PhoneLock: 33333333
[COLOR=*****Brown]PhoneLock: 043[/COLOR]
Done.

 

[Jonab Ru]

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

1661 format through rj45


Initializing...
DA_LIB_VER_3.2.1.3
It is sensing the pinout fast,please hold on the phone Power key
RXD=5 TXD=9
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6223, HardwareVer:8A04, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0001227E22022201
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: XM8661_V32_20100730
Changing baudrate to 115200...
Done.
Formatting Flash...
AutoFormat address: start=0x00700000, size=0x00100000
All Done

 

[Jonab Ru]

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

G'Five U808 Format done Initializing...
DA_LIB_VER_3.2.1.3
It is sensing the pinout fast,please hold on the phone Power key
RXD=5 TXD=4
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: B017.GFIVE.L11.V07.11
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done

 

[Jonab Ru]

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Nktel 2008 flash done
Initializing...
DA_LIB_VER_3.2.1.3
It is sensing the pinout fast,please hold on the phone Power key
RXD=23 TXD=17
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A03, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: N96_P11_TOSHIBA_S5LCD_V1.0.2
Changing baudrate to 921600...
Done.
Analyzing the UID-Encryption info, Some file may need a long time...
Decryption complete. Key[B234D95C1264C544]-B9
Downloading Flash file...
All Done.