GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Initializing...
DA_LIB_VER_3.2.0.1
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=2
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A03, SoftwareVer:8A00
This is a secure BB,Testing AF......
Testing Authencate image...
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0001227E22212200
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: BB19_BET_L11EN_311_091028_ZY-TL_BYD_SP75_129JB_CTF_BT_FM
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Initializing...
DA_LIB_VER_3.2.0.1
It is sensing the pinout fast...
RXD=6 TXD=7
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100006A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_TV00560002EDGB
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x00790000, Size=0x00060000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.
Problem was, set show with sim "Illegal software"
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

HXD5130 UNLOCK DONE JUST 00.13 SEC
Initializing...
DA_LIB_VER_3.2.0.1
It is sensing the pinout fast...
RXD=4 TXD=3
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100026A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_S29GL064A_T
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 0A
IMEI 1=355234040752376
IMEI 2=355234040752384
--------NOR_FLASH_CONFIG--------
Flash Bank count=1
EFS sector count=6
File sector count=0
Sector size=0x00010000
Flash start addr=0x00000000
Flash size=0x00800000
Fix NV addr=0x00780000
Product information addr=0x007F0000
MMI resource addr=0x005C0000
------Auto Format Address-------
Start=0x00790000
Size =0x00060000
Read FS info...done


Initializing...
DA_LIB_VER_3.2.0.1
It is sensing the pinout fast...
RXD=4 TXD=3
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100026A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_S29GL064A_T
setting the Flash Parameters...
Settings have been completed!
Connect and search Security Code...
PhoneLock: 88685266
Privacy protect: 1249
Done.
attachment.php

Attached Thumbnails
Click image for larger version Name: 5130.JPG Views: 0 Size: 83.2 KB ID: 254350
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Initializing...
DA_LIB_VER_3.2.0.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=2 TXD=3
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC257E25082501
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: A310.SW.V00.02.YIDALONG
Changing baudrate to 460800...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

g five 6700i flash done
\
Initializing...
DA_LIB_VER_3.2.0.2
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM13
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_ST_M58WR064KT
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Programming...
Compare Image: Enable
All Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Q88I reset phone code done:

Initializing...
DA_LIB_VER_3.2.0.1
It is sensing the pinout fast...
RXD=21 TXD=18
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700000000000_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_TV00570002xDGB
setting the Flash Parameters...
Settings have been completed!
Analyzing FileSystem...
Done.
Unlocking all blocks before program/erase...
The requested operation has failed.
Reset the user data area...
Note: if user partition size is more than 4MB, The phone would may take 1 minute to rebuild FileSystem after Reset Action.
All Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Nokia MFU MTK6253 done
-------------------Created: 22/02/2011 4:53:55 PM-------------------

Chip=MTK
Action=Format
FlashType=NOR
boot=Ver3.1016
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=E:\GPG DRAGON\flashes\Firmwares\MTK\MFU NOKIA\TL_T553U801_F39LO6_00.31
Comport=COM18
Baudrate=921600

CPU_Type=MT6253
CPU_ID=0000000F
NOR_ID=0098009E00000000
NOR_Size=16MB
NOR_Name=[TOSHIBA] TC58FYM7T8C
NOR_DieCnt=
NAND_ID=0000000000000000
NAND_Size=0MB
NAND_Name=Nand:N/A

Initializing...
DA_LIB_VER_3.2.0.1
It is sensing the pinout fast,please hold on the phone Power key
RXD=4 TXD=1
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 0098009E00000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: TL_T553U801_F39LO6_00.31
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

5800 dual sim tested in this version2.02

lock code/reset/format


Initializing...
DA_LIB_VER_3.2.0.2
It is sensing the pinout fast...
D-=4 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM50
Connected...sending boot...
FDL test...OK
ArmBootMode: 660080002C42A0FF_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600R Flash: NOR_K5L2731CAM
setting the Flash Parameters...
Settings have been completed!
Connect and search Security Code...
Privacy protect: 1
Privacy protect: #3
Privacy protect: 9
Privacy protect: #1
Privacy protect: 0
Theft proof: 888888
PhoneLock: 8880
Privacy protect: 6
Privacy protect: 1234
Theft proof: 123456
PhoneLock: 102206
Done.

Initializing...
DA_LIB_VER_3.2.0.2
It is sensing the pinout fast...
D-=4 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM50
Connected...sending boot...
FDL test...OK
ArmBootMode: 660080002C42A0FF_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600R Flash: NOR_K5L2731CAM
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x00F20000, Size=0x000C0000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

C200 done
Initializing...
DA_LIB_VER_3.2.0.1
It is sensing the pinout fast,please hold on the phone Power key
RXD=6 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 007F227E220A2201
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: F021_2A_CLUB_V49
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00380000, size=0x00080000
All Done
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Initializing...
DA_LIB_VER_3.2.0.4
It is sensing the pinout fast...
RXD=6 TXD=7
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700500026A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_ST_M36LOR7050U3ZS
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 0A
IMEI 1=352660040048394
IMEI 2=352660040048402
--------NOR_FLASH_CONFIG--------
Flash Bank count=1
EFS sector count=7
File sector count=0
Sector size=0x00020000
Flash start addr=0x00000000
Flash size=0x01000000
Fix NV addr=0x00EE0000
Product information addr=0x00FE0000
MMI resource addr=0x00840000
------Auto Format Address-------
Start=0x00F00000
Size =0x000E0000
Read FS info...done
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

success fully flash by gpg dragon 6600l Initializing...
DA_LIB_VER_3.2.0.4
It is sensing the pinout fast...
RXD=6 TXD=7
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700500026A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_ST_M36LOR7050U3ZS
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Programming...
Compare Image: Enable
All Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

6600l success fully formate by gpg dragon Initializing...
DA_LIB_VER_3.2.0.4
It is sensing the pinout fast...
RXD=6 TXD=7
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700500026A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_ST_M36LOR7050U3ZS
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x00F00000, Size=0x000E0000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Nktel Model2008 format done


Initializing...
DA_LIB_VER_3.2.0.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=5 TXD=10
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: N96_P13_ABROAD_S5_TM_ODM_V1.2.3
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
 
You must log in or register to reply here.
Prev Thread | Next Thread
Back
Top