GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

A200

BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: N66_ABROAD_2CDGB_TAINMA_V1.6.9
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

2730 SPD FORMAT DONE

Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
D-=8 D+=9
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM19
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: 66007001 Flash: NOR_EN71GL064
Set FLASH Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x007B0000, Size=0x00040000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

NKTEL K500 SPD FORMAT DONE

Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
D-=10 D+=7
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM19
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700500005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_TV00570002xDGB
Set FLASH Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x00F00000, Size=0x000E0000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

F100 Lawow write flash done

Analysis the file...
It is sensing the pinout fast...
D-=2 D+=3
Searching commport...please wait...
Spd USB-to-Serial=COM19
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700900025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: 66007009 Flash: NOR_K5L6331CAA
Set FLASH Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Programming...
All Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
D-=21 D+=22
Searching commport...please wait...
Spd USB-to-Serial=COM12
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 660080000C42A0FF_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600R Flash: NOR_TV00570002xDGB
Set FLASH Parameters...
Settings have been completed!
Connect and search Security Code...
Privacy protect: 8
Privacy protect: 0
Privacy protect: 2
Privacy protect: 5
Privacy protect: 9
PhoneLock: 1234
Privacy protect: 000
Theft proof: 100000
Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

5130 SPD phone lock done!!


Initializing...
DA_LIB_VER_2.5.1.2
Note: please sense phone's pinout by the Box first.
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700500006A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_TV00560002EDGB
Set FLASH Parameters...
Settings have been completed!
Connect and search Security Code...
Theft proof: 106106
PhoneLock: 10310344
Privacy protect: 1234
Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

nktel bluetoth unlock done
Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
RXD=18 TXD=19
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700500006A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_ST_M58WR064KT
Set FLASH Parameters...
Settings have been completed!
Connect and search Security Code...
Theft proof: 030403
Theft proof: 111111
PhoneLock: 50167
Privacy protect: 1234
Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Bilwani B777 Flash Done

Analysis the file...
It is sensing the pinout fast...
D-=6 D+=7
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM76
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: 66007001 Flash: NOR_ST_M30L0T7000T0
Set FLASH Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Programming...
All Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

verture v5310 format done
Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=4
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC257E25062501
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: A263C_02B_S102_V_R1.0.51.1
Changing baudrate to 115200...
Done.
Formating Flash...
AutoFormat address: start=0x00700000, size=0x00100000
All Done
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

verture v5310 write imei done
Initializing...
DA_LIB_VER_2.5.1.2
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=4 TXD=3
Connecting...Please hold on the ON/OFF key...
Connecting, Please turn on the phone...
Connected! Checking IMEI...
Original IMEI 1= +EGMR: ""

OK
IMEI 1 rebuild has been implemented: 353130040905687
Original IMEI 2= +EGMR: ""

OK
IMEI 2 rebuild has been implemented: 353130040509695
Need to restart the phone to verify new imei.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

nitializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=6 TXD=5
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC240200000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: LBBKY65.8.12.1.0T01M0325_M571
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Lawow f800 done with Expert mode

Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
D-=2 D+=3
Searching commport...please wait...
Connecting...
Connected...sending boot...
Spd USB-to-Serial=COM19
FDL test...OK
ArmBootMode: 6600700100025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Manufacturer: Macronix, Device: Unknow
CPU: 66007001 Flash: NOR_UNKNOWN
Set FLASH Parameters...
Settings have been completed!
CPU: 66007001 Flash: User-defined
Reading FileSystem info...
FileSystem Version: 0A
Start=0x007A0000, Size=0x00050000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM41
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700500025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_TV00570002xDGB
Set FLASH Parameters...
Settings have been completed!
Connect and search Security Code...
PhoneLock: 2222
Privacy protect: 5825622
Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

It is sensing the pinout fast,please hold on the phone Power key
RXD=5 TXD=10
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: N66_ABROAD_2CDGB_S5_TM_V4.0.2
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Initializing...
DA_LIB_VER_3.2.0.1
It is sensing the pinout fast...
D-=2 D+=3
Searching commport...please wait...
Spd USB-to-Serial=COM19
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700900025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: 66007009 Flash: NOR_K5L6331CAA
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Programming...
Compare Image: Enable
All Done.
 
You must log in or register to reply here.
Prev Thread | Next Thread
Back
Top