GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

lephone m9+ read code ok
Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
D-=8 D+=9
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM342
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 460800 ok
Reading phone HW info...
Read info is done.
CPU: 66007001 Flash: NOR_S29GL064A_T
Set FLASH Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 0A
IMEI 1=354273040920964
IMEI 2=354273041020962
--------NOR_FLASH_CONFIG--------
Flash Bank count=1
EFS sector count=6
File sector count=0
Sector size=0x00010000
Flash start addr=0x00000000
Flash size=0x00800000
Fix NV addr=0x00780000
Product information addr=0x007F0000
MMI resource addr=0x00600000
------Auto Format Address-------
Start=0x00790000
Size =0x00060000
Read FS info...done


Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
D-=8 D+=9
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM342
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 460800 ok
Reading phone HW info...
Read info is done.
CPU: 66007001 Flash: NOR_S29GL064A_T
Set FLASH Parameters...
Settings have been completed!
Connect and search Security Code...
PhoneLock: 1981
Privacy protect: 1234
Privacy protect: 1981
Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

nokia Q8 MTK IMEI WHRITE OK


Initializing...
DA_LIB_VER_2.5.1.2
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=6 TXD=5
Connecting...Please hold on the ON/OFF key...
Connecting, Please turn on the phone...
Connected! Checking IMEI...
Original IMEI 1= +EGMR: ""

OK
IMEI 1 rebuild has been implemented: 352365214563214
Original IMEI 2= +EGMR: ""

OK
IMEI 2 rebuild has been implemented: 356214578920315
Need to restart the phone to verify new imei.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=4
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A03, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098004900000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: S90_TOSHIBA_MP_V003
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

SPD CPU SIGMATEL USER LOCK DONE

Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
RXD=9 TXD=7
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700000000000_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_TV00570002xDGB
Set FLASH Parameters...
Settings have been completed!
Connect and search Security Code...
PhoneLock: 1234
Privacy protect: 2284
Theft proof: 121212
Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

[COLOR=*****Brown]SAMSUNG ANYCALL A5166 (SPD)CPU FORMATING DONE[/COLOR][COLOR=*****Brown]
[/COLOR][COLOR=*****Brown]AFTER ILEGAL SOFWARE
READ INFO!!

[/COLOR]Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM324
Connected...sending boot...
FDL test...OK
ArmBootMode: 660090002C42A0FF_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 460800 ok
Reading phone HW info...
Read info is done.
CPU: SC6600H Flash: NOR_TV00570002xDGB
Set FLASH Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 0A
IMEI 1=355361020037237
IMEI 2=355361021037236
--------NOR_FLASH_CONFIG--------
Flash Bank count=1
EFS sector count=7
File sector count=1
Sector size=0x00020000
Flash start addr=0x00000000
Flash size=0x01000000
Fix NV addr=0x00EE0000
Product information addr=0x00FE0000
MMI resource addr=0x00A00000
------Auto Format Address-------
Start=0x00F00000
Size =0x000E0000
Read FS info...done

read fullflash done!!!!!
Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM324
Connected...sending boot...
FDL test...OK
ArmBootMode: 660090002C42A0FF_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 460800 ok
Reading phone HW info...
Read info is done.
CPU: SC6600H Flash: NOR_TV00570002xDGB
Set FLASH Parameters...
Settings have been completed!
Reading Flash...
All Done.

formating done... all is ok!!!
Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM324
Connected...sending boot...
FDL test...OK
ArmBootMode: 660090002C42A0FF_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 460800 ok
Reading phone HW info...
Read info is done.
CPU: SC6600H Flash: NOR_TV00570002xDGB
Set FLASH Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x00F00000, Size=0x000E0000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.


thanks gpgdragon...................
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Nokia M9 (SPD) Format done Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
RXD=15 TXD=14
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100006A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: 66007001 Flash: NOR_ST_M30L0T7000T0
Set FLASH Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x00EA0000, Size=0x00140000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

nitializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=7 TXD=6
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A03, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098004900000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: S90_TOSHIBA_MP_V003
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=5 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: B017.COMP_MCP.GFIVE.FAT.13
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done

Thanks ,GPG Team
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

nktel k600 unlock done
Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
RXD=5 TXD=8
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700500026A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_TV00570002xDGB
Set FLASH Parameters...
Settings have been completed!
Connect and search Security Code...
Privacy protect: 9
Privacy protect: 0
Privacy protect: 8
Privacy protect: 2742
Theft proof: 757844
Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

C702I SUCCESSFULLY FORMAT

READ FLASH LOGS

Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=5 TXD=8
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A03, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC257E25082501
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: T500_JYY_MLB_1_2T05S1222


FORMAT LOGS

Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=5 TXD=6
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A03, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC257E25082501
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: T500_JYY_MLB_1_2T05S1222
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=4 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 002088C400000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: A560.SW.V00.02.XIAHUA
Changing baudrate to 460800...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

NASAKI M33 SPD FORMAT DONE

Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM19
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700500025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_TV00570002xDGB
Set FLASH Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x00F00000, Size=0x000E0000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

LAWOW F100 WRITE FLASH DONE

Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM19
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700500025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_TV00570002xDGB
Set FLASH Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x00F00000, Size=0x000E0000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.

THANKS GPG TEAM
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Yamaar x5700 Format done Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=9 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 00EC240400000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: C100A0.XT.YAMAAR.101104.02
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
 
You must log in or register to reply here.
Prev Thread | Next Thread
Back
Top