NANAIU

Well-known Member
Joined
Oct 15, 2010
Posts
2,734
Likes
63
Location
BD
answer: Successfully unlocked/repaired phones by Infinity-Box

COM10 [VCP0] selected
Action: unlock
Device: C113(a),C114,C115,C116,C117,C118
Checking data, wait...
Connect...
Press and HOLD Power button...
connection mode: 00
Release Power button !
Connect Done
Boot...
Boot Done
Set Baud...
115200
Set Baud Done
Check Flash-1...
SW version: 2.0.65.N.
HW version: _E88
imei otp: 358019004169841
Check Flash-1 Done
Check Flash-2...
reading ...
file saved: C:\Program Files\InfinityBox\Moto01\backup_eeprom_calibration _358019004169841_20090427-111944.18E.bin
imei eeprom: 358019004169841
Check Flash-2 Done
Write...
Write Done
Finished, time used: 24 sec
Remove/Install battery now !
 

NANAIU

Well-known Member
Joined
Oct 15, 2010
Posts
2,734
Likes
63
Location
BD
answer: Successfully unlocked/repaired phones by Infinity-Box

COM10 selected
module v2.81
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A05:8A00]...
CPU: MT6223
high speed boot On
chip: 0011:83EA:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E05
Date: 2000.00.00
Version: 1.0
Version: NK6223_ABROAD_CDGB_OV_BYD_V1.7.8
Version: L700_V1.0
detecting structure #2...
1 2 3 5 7 8 9 11 13 15 16 17 19 21 22 23 25 27error: detection failed (18 tries), read flash and send to support
connection Ok
building list...
done
items to clear: 167
warning: wrong packet cs
items cleared: 167 of 167
building list...
done
items remains: 0
Finished, time used: 32 sec
Remove/Install battery now !
 

NANAIU

Well-known Member
Joined
Oct 15, 2010
Posts
2,734
Likes
63
Location
BD
answer: Successfully unlocked/repaired phones by Infinity-Box

Here is How...

1. Connect phone with Infinity Box Pin finder, L10C cable pins RX 4 TX 5
2. Read eeprom and full flash backup and for support@infinity-box.biz
3. Choose Model ZTE-X760 and unlock method: smart fast
4. Enjoy Unlocked Phone

Br
wink.gif



Here is Log...

COM10 [VCP0] selected
module v2.71
Action: unlock
unlock method: smart fast
Model: ZTE-X760
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
chip: 0001:5203:0003
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: X760_Z15UK_FS_B07A105
Version: ZTEMT25_07A_HW_C
44 byte(s) read
imei: 35235302112611
connection Ok
157 byte(s) read
reading data...
building new data...
writing data...
145 byte(s) read
reading data...
building new data...
writing data...
verifying...
verification Ok
done
Finished, time used: 12 sec
Remove/Install battery now !
 

NANAIU

Well-known Member
Joined
Oct 15, 2010
Posts
2,734
Likes
63
Location
BD
answer: Successfully unlocked/repaired phones by Infinity-Box

LG-KP135 reset

COM3 [VCP0] selected
module v1.36
Device: LG-KP135
Checking data, wait...
advanced flash detection enabled
Action: reset
Boot ...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting, wait...
Release Power button now !
flash: 01227E22212200:FEEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
id: 00005258
Boot Done
Set baud ...
921600
Set baud Done
Check flash ...
current eeprom imei: 353955020436455
file saved: D:\Program Files\InfinityBox\LGA\eeprom_353955020436455_LG-KP135_20090326-223343.B1E.bin
....
reading _eeprom-ffs_353955020436455...
file saved: D:\Program Files\InfinityBox\LGA\_eeprom-ffs_353955020436455_LG-KP135_20090326-223451.B1E.bin
Check flash Done
Check space ...
Check space Done
Check parameters ...
Check parameters Done
Erase ...
Erase Done
Write ...
Write Done
Finished, time used: 118 sec
Remove/Install battery now !
 

NANAIU

Well-known Member
Joined
Oct 15, 2010
Posts
2,734
Likes
63
Location
BD
answer: Successfully unlocked/repaired phones by Infinity-Box

reset settings Alcatel-C701X

COM12 [VCP0] selected
module v2.65
Action: reset settings
Model: Alcatel-C701X, C701A
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A03:8A02]...
CPU: MT6226
chip: 0031:33C8:A000
status: 01
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E03
Date: 2005.04.12
Version: 1.0
Version: MAUI.06A.W06.52.SP1.V24
Version: JRD26_06A_HW
45 byte(s) read
imei: 35320501969446
connection Ok
building list...
done
items to clear: 312
warning: wrong packet cs
warning: wrong packet cs
warning: wrong packet cs
items cleared: 268 of 312
building list...
done
items remains: 2
Finished, time used: 266 sec
Remove/Install battery now !
 

NANAIU

Well-known Member
Joined
Oct 15, 2010
Posts
2,734
Likes
63
Location
BD
answer: Successfully unlocked/repaired phones by Infinity-Box

MOTO C117 flash for unlock


COM4 [Serial2] selected
"repair mode" active
"smart write" active
"soft restore" active
Action: flash
Write: Firmware
Write: Language Pack
Write: Flex
Skip: Eeprom
Device: C113(a),C114,C115,C116,C117,C118
Checking data, wait...
Connect...
Press and HOLD Power button...
Release Power button !
Connect Done
Boot...
Boot Done
Set Baud...
921600
Set Baud Done
Check Flash-1...
SW version: 2.3.65.N.
HW version: _E88
imei otp: 352227013318673
Check Flash-1 Done
Check Flash-2...
reading ...
file saved: D:\Program Files\InfinityBox\Moto01\backup_eeprom_calibration _352227013318673_20090315-143133.18E.bin
imei eeprom: 352227013318673
Check Flash-2 Done
Write...
Writing: all flash areas
Write Done
Finished, time used: 89 sec
Remove/Install battery now !
 

NANAIU

Well-known Member
Joined
Oct 15, 2010
Posts
2,734
Likes
63
Location
BD
answer: Successfully unlocked/repaired phones by Infinity-Box

bird s198 unlock

Application: D:\Program Files\InfinityBox\Moto03\Moto03.exe
initialize...
initialization Ok
Loading data, wait...
[Infinity Box] v1.08
S/N: 0E69:0112
Wait...
Current device: Bird-S198
Done
Action: unlock
Device: Bird-S198
error: phone is not connected, re-connect phone and try again.
Finished, time used: 0 sec
device status changed
Action: unlock
Device: Bird-S198
phone connected, working...
version: @(#)M3.0_ADE-G_C_07.00.00_R_ROM1ULS060323
imei: 35432901219300
working...
file saved: backup_unlock_Bird-S198_35432901219300_20090329-184304.A8E.bin
operaton finished Ok
restart...
Finished, time used: 10 sec
device status changed
 

NANAIU

Well-known Member
Joined
Oct 15, 2010
Posts
2,734
Likes
63
Location
BD
answer: Successfully unlocked/repaired phones by Infinity-Box

N95 8gb RM159 china

COM10 selected
module v2.81
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:C503:000F
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E05
Date: 2006.06.14
Version: 1.0
Version: MAUI.06B.W07.24.MP.V11
Version: NLJ25_06B_HW
detecting structure #2...
0 done
44 byte(s) read
imei: 35293589605868
connection Ok
building list...
done
items to clear: 176
warning: wrong packet cs
items cleared: 176 of 176
building list...
done
items remains: 0
Finished, time used: 23 sec
Remove/Install battery now !
 

.::shahzad::.

Junior Member
Joined
Jan 17, 2012
Posts
47
Likes
36
answer: Successfully unlocked/repaired phones by Infinity-Box

Vodafone 541 successfully unlock

trying to select model: /541
model selected via command line: Vodafone-541
Device: Vodafone-541
Initialization done

==== [1/3/2012 4:32:13 PM] ====
COM6 [VCP0] selected
module v4.01
Device: Vodafone-541
Checking data, wait...
advanced flash detection enabled
Action: rebuild security area
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:B503:A00A
status: 01
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: 98006F00000004:09EA0000000000
flash: AMD/Fujitsu std [T 0008x004000 00FFx020000] 32Mb
otp offset: 01FE0000
number of flash chip/regions detected: 01/01
Initialize Done
====> Set baud ...
115200
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
usb bootloader detect...
usb bootloader (chip) is present: 00020000
searching rom info...
search rom info finished
rom info structure: [protected] type (07), 1 record(s)
TCL-ID is present
startup code area #1 is Ok
startup code area #1 backup saved: c:\InfinityBox\MModule\backup_security\id.0EE400E7.[JRDSZ25_08A_PCB01_GPRS_MT6225_S00.MAUI_08A_W08_40_SP1_V32.BIN_E8F450A0].rpl
rom info detection finished
TCL-ID detection...
TCL-ID detection done
device-id: 0EE400E7
rom info ver: 07
sw version: JRDSZ25_08A_PCB01_GPRS_MT6225_S00.MAUI_08A_W08_40_SP1_V32.BIN
project-id: MAUI.08A.W08.40.SP1.V32, A050F4E8
code offset: 00020000
ffs offset/size [01]: 01800000/00800000
TCL-ID identification
version: 17B
provider: 708X-2EVDGB1
customization: CN17FC75
customization: XN17FC75
TCL-ID identification done
rom info structure: [protected] type (07), 1 record(s)
TCL-ID is present
ffs/eeprom address assigned: 01800000
startup code area #1 check...
startup code area #1 fixed
sec info (detailed) detection...
searching sec info#1...
search sec info#1 finished
product id: JRDHUIZHOU_MT6225_OTMINI_SERIES
area1 is invalid
area2 is invalid
area3 is valid
area4 is invalid
searching sec info#2...
search sec info#2 finished
sim-lock status: enabled
product id: JRDHUIZHOU_MT6225_OTMINI_SERIES
area1 is valid
area2 is valid
area3 is valid
area4 is valid
searching sec info#3...
search sec info#3 finished
sim-lock status: enabled
product id: JRDHUIZHOU_MT6225_OTMINI_SERIES
area1 is valid
area2 is valid
area3 is valid
area4 is valid
number of sec info areas: 3
security area (sec info, cust) calculation...
error: security area (sec info, cust) header is invalid
security area (sec info, hash) calculation...
..................security area (sec info, hash) detecting size...
security area (sec info, hash) detecting parameters...
security area (sec info, hash) encoding...
done
flash: 98006F00000004:09EA0000000000
flash: 98006F00000004:09EA0000000000
Write: security area (sec info, hash)
security area (sec info, hash) calculation done
security area (sec info, cust) calculation...
identification header detected
customization: XN17FC75
customization name adjusted
flash: 98006F00000004:09EA0000000000
flash: 98006F00000004:09EA0000000000
Write: security area (sec info, cust)
security area (sec info, cust) calculation done
security area (sec info, hash) calculation...
..................security area (sec info, hash) detecting size...
security area (sec info, hash) detecting parameters...
security area (sec info, hash) encoding...
done
flash: 98006F00000004:09EA0000000000
flash: 98006F00000004:09EA0000000000
Write: security area (sec info, hash)
security area (sec info, hash) calculation done
security area (sec info, cust) calculation...
identification header detected
customization: XN17FC75
customization name adjusted
flash: 98006F00000004:09EA0000000000
flash: 98006F00000004:09EA0000000000
Write: security area (sec info, cust)
security area (sec info, cust) calculation done
security area (sec info, hash) calculation...
..................security area (sec info, hash) detecting size...
security area (sec info, hash) detecting parameters...
security area (sec info, hash) encoding...
done
flash: 98006F00000004:09EA0000000000
flash: 98006F00000004:09EA0000000000
Write: security area (sec info, hash)
security area (sec info, hash) calculation done
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
original imei: 35400703695650
flash: 98006F00000004:09EA0000000000
Backup required data Done
====> Patch required data ...
Patch required data Done
====> Special operation ...
Special operation Done
====> Write ...
Write Done
====> Finalization ...
ffs formatting...
flash: 98006F00000004:09EA0000000000
Finalization Done
file saved: c:\InfinityBox\MModule\backup_security\Vodafone-541_JRDSZ25_08A_PCB01_GPRS_MT6225_S00.MAUI_08A_W08_40_SP1_V32__system_log_0EE400E7_E8F450A0_20120103-163809.B0X.bin
Finished, time used: 5 min 40 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !
 

sima_telecom

Member
Joined
Sep 8, 2011
Posts
212
Likes
2
answer: Successfully unlocked/repaired phones by Infinity-Box

niec................................
 

.::shahzad::.

Junior Member
Joined
Jan 17, 2012
Posts
47
Likes
36
answer: Successfully unlocked/repaired phones by Infinity-Box

Huawei G6603 successfull unlock

os5xqw.jpg
 

.::shahzad::.

Junior Member
Joined
Jan 17, 2012
Posts
47
Likes
36
answer: Successfully unlocked/repaired phones by Infinity-Box

GB102 successully unlock

COM29 [VCP0] selected
module v1.78
Device: LG-GB102
Checking data, wait...
Action: "sp-unlock"
direct unlock method #2 (Airtel etc.)
Boot ...
Press and HOLD Power button now !
e-gold: 820000
loading...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud ...
115200
Set Baud Done
Connecting ...
flash: 007F:22F6
Connecting Done
Check hardware ...
Check hardware Done
Check parameters ...
sw version: .01 ULC2GL GB102 VODAFONE ES 01 FL 34 V10c 214-01 JUN-05-2009
Check parameters Done
backup critical area ...
reading eeprom-static...
file saved: c:\InfinityBox\Pana01\LG-GB102_eeprom-static_20120220-150615.B1E.bin
loading data...
data loaded
imei: 35916403033959300
reading eeprom-security_35916403033959300...
file saved: c:\InfinityBox\Pana01\LG-GB102_eeprom-security_35916403033959300_20120220-150616.B1E.bin
reading eeprom-complete_35916403033959300...
file saved: c:\InfinityBox\Pana01\LG-GB102_eeprom-complete_35916403033959300_20120220-150623.B1E.bin
backup critical area Done
Check memory ...
Check memory Done
Write ...
Erasing: eeprom-security
Writing: eeprom-security
probably you need to restore original imei after unlock process
Write Done
Finished, time used: 25 sec
Remove/Install battery now !
 
Top