Successfully unlocked/repaired phones by Infinity-Box

[NANAIU]

Fly SX 200 Unlock done here is log ,

COM17 [VCP1] selected
Action: unlock
unlock method: smart fast
Model: Fly-SX200
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing[6225:8A03:8A00]...
CPU: MT6225
chip: 0001:9D03:0001
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: MAUI.07A.W07.36.MP.V23
Version: EZIO25_07A_HW
44 byte(s) read
imei: 35342302016731
connection Ok
157 byte(s) read
reading data...
building new data...
writing data...
145 byte(s) read
reading data...
building new data...
writing data...
verifying...
verification Ok
done
Finished, time used: 9 sec
Remove/Install battery now !

 

[NANAIU]

answer: Successfully unlocked/repaired phones by Infinity-Box

toshiba TS10 unlocked with pin-out i want to share this to all...

toshiba unlocking...using my infinity box...

heres the pin out...

 

[NANAIU]

answer: Successfully unlocked/repaired phones by Infinity-Box

Sucesfully Unlocked Benq S660C RIPCURL with Infinity Box The only difficult step was make the cable. Maybe the TXT in the Infinity Box Shell is not too easy to undersatand. But the cable is very simple. Changing the pinout of Motorola T190 Cable.
The Unlock Process?????? Very easy, Infinity always work!!!!!!!!!!!!

Here is the Log:

COM5 [VCP0] selected
modulo v1.31
Device: BenQ-S660C
Checkeando datos, espere...
Action: unlock
Boot...
El Telefono deberia estar APAGADO !
Presiona boton POWER Ahora !
Connecting...
Boot Done
Check Connection...
Check Connection Done
Set Baud...
812500
Set Baud Done
Check Flash...
error: Probably wrong model selected.
Continue anyway ?
Check Flash Done
Check Parameters...
Flash: 0089:88C500010001
Archivo guardado: C:\Archivos de

programa\InfinityBox\BModule\eeprom-00_20090325-021655.78F.bin
Archivo guardado: C:\Archivos de

programa\InfinityBox\BModule\eeprom-01_20090325-021659.78F.bin
Archivo guardado: C:\Archivos de

programa\InfinityBox\BModule\eeprom-02_20090325-021703.78F.bin
Check Parameters Done
Check Space...
Flash: 0089:88C500010001
flash: Intel I28F320C3B-B B 4Mb
Check Space Done
Check Data...
Check Data Done
Erasing...
erase operation not required
Erasing Done
Writing...
Flash: 0089:88C500010001
Flash: 0089:88C500010001
Flash: 0089:88C500010001
Writing Done
Finished, time used: 35 sec
Quite/coloque la bateria ahora !


THANKS INFINITY, the solution when other tool nothing have to do.

 

[NANAIU]

answer: Successfully unlocked/repaired phones by Infinity-Box

Emblaze-Touch7 Unlock again ==== log opened: [4/1/2009 3:08:58 AM] ====
Application: C:\Program Files\InfinityBox\MModule\MModule.exe
Loading data, wait...
[Infinity Box] v2.69
S/N: xxx:0112
Wait...
Device: Emblaze-Touch7
Done
==== log: [4/1/2009 3:09:25 AM] ====
COM6 [VCP0] selected
module v2.69
Action: read codes
unlock method: read codes
Model: Emblaze-Touch7
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6219:8B02:8B01]...
CPU: MT6219
chip: 0031:FB41:0BFC
status: FF
detected CPU: MT6226MA
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6219B,E02
Date: 2005.04.12
Version: 1.0
Version: SL900A.05C.W06.08.MP.V64
Version: ESL6227_05C_HW
60 byte(s) read
imei: 35385801025518
connection Ok
208 byte(s) read
Phone lock: Off
Network lock: On
Network subset lock: Off
Service provider lock: On
Corporate lock: Off
IMSI lock: Off
Auto lock: Off
NP code: 32534669/23356496
locked to: FFF-FF
SP code: 0000000000003344/0000000000003344
CP code: FFFFFFFFFFFF0000/FFFFFFFFFFFF0000
IMSI code: 1010087726693132/0101807762961323
Phone code: 3343FFFFFFFF1000
Finished, time used: 13 sec
Remove/Install battery now !

 

[NANAIU]

answer: Successfully unlocked/repaired phones by Infinity-Box

Alcatel OT-701 UNLOCK 100% ok i am useing this version

C701X-2ARGFR1_XC18SB20_JRD26_06A_PCB01_GPRS_MT6226_S02.M AUI_06A_W06_52_SP1_V17_2007-10-22_simfree_En_Fr_Es_It_De.B0M
then complete format phone 100 % ok

module v2.70
Device: Alcatel-C701X, C701A
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6226:8A03:8A02]...
CPU: MT6226
chip: 0031:0576:A000
status: 01
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 01227E22302200:2BEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x008000 00FEx020000 0004x008000] 32Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud ...
921600
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\MModule\backup_security\id.0C828 86B.[JRD26_06A_PCB01_GPRS_MT6226_S02.MAUI_06A_W06_52_SP 1_V17.BIN_6DAFF008].rpl
identification#1 detection finished
device-id: 0C82886B
identification#1 protocol ver: 05
ver. sw 1: JRD26_06A_PCB01_GPRS_MT6226_S02.MAUI_06A_W06_52_SP 1_V17.BIN
ver. sw 2: MAUI.06A.W06.52.SP1.V17, F70F5092
ffs offset/size: 01200000/00E00000
detect device identification#2...
detection phase #1...
detect device identification#2 finished
sim-lock status: disabled
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
original imei: 35320501055562
flash: 01227E22302200:2BEA0000000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
formatting...
flash: 01227E22302200:2BEA0000000000
Finalization Done
file saved: C:\Program Files\InfinityBox\MModule\backup_security\Alcatel-C701X,C701A_JRD26_06A_PCB01_GPRS_MT6226_S02.MAUI_0 6A_W06_52_SP1_V17__system_log_0C82886B_6DAFF008_20 090421-011851.B0X.bin
Finished, time used: 175 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

thanks for infinity team

 

[NANAIU]

answer: Successfully unlocked/repaired phones by Infinity-Box

x761 unlock ok COM8 [VCP0] selected
module v2.68
Action: unlock
unlock method: smart fast
Model: ZTE-X761
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
chip: 0001:BF03:0001
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: X761_Z0_S_A07A103
Version: ZTEMT25_07A_HW_A
44 byte(s) read
imei: 357873020xxxxx
connection Ok
157 byte(s) read
reading data...
reading data #4...
building new data...
writing data...
145 byte(s) read
reading data...
building new data...
writing data...
verifying...
verification Ok
done
Finished, time used: 15 sec
Remove/Install battery now !

 

[NANAIU]

answer: Successfully unlocked/repaired phones by Infinity-Box

kp260 full imei and unlock by infinity box....process by WILUNLOCK



LOG OPERACION


Phone must be SWITCHED ON !
Connecting, wait...
Connection Ok
Action: imei
software version: KP260dAT-00-V10a-732-101-JUL-30-2008+2
original imei: 00000000000000000
new imei: 01295162284355
imei verification Ok
Done
Finished

 

[NANAIU]

answer: Successfully unlocked/repaired phones by Infinity-Box

ZTE i766


imei repair full


Action: imei
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6225, E03
Hardware version: ZTEMT25_07A_HW_A
Software version: I766_V2_Z1_S_A0FA108
Software date: 2006.06.14
Barcode: 50010811229148854567500833220409 101
imei: 357963010565925
imei write method: mode-1
imei write channel: imei #1 for dual sim/mono CPU
new imei: 0129216219xxxxxx
verification Ok
Finished, time used: 5 sec
Power off phone now !

 

[NANAIU]

answer: Successfully unlocked/repaired phones by Infinity-Box

LOG OPERATION ..IMEI FULL ME550 FULL WITH INFINITY BOX


Phone must be SWITCHED ON !
Conectando, espere...
coneccion Ok
Action: imei
version de software: ME550dP64FL-57-V10a-732-101 Aug 17 2007+6
Imei original: 01121600318498200
Nuevo imei: 01220462550745
imei verification Ok
Listo
Finished

 

[NANAIU]

answer: Successfully unlocked/repaired phones by Infinity-Box

COM7 [VCP0] selected
module v1.65
Device: Sagem-my220x
Checking data, wait...
Action: unlock
unlock method-1
Boot ...
Press and HOLD Power button now !
e-gold: 820010
loading...
middle part...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud ...
230400
Set Baud Done
Connecting ...
flash: 0001:011A
Connecting Done
Check hardware ...
Check hardware Done
Check parameters ...
Check parameters Done
backup critical area ...
reading eeprom-static...
file saved: C:\Program Files\InfinityBox\Pana01\Sagem-my220x_eeprom-static_20090331-134914.B1E.bin
loading data...
data loaded
reading eeprom-security...
file saved: C:\Program Files\InfinityBox\Pana01\Sagem-my220x_eeprom-security_20090331-134914.B1E.bin
reading eeprom-complete...
file saved: C:\Program Files\InfinityBox\Pana01\Sagem-my220x_eeprom-complete_20090331-134917.B1E.bin
reading additional data...
file saved: C:\Program Files\InfinityBox\Pana01\Sagem-my220x_lock-area_20090331-134931.B1E.bin
backup critical area Done
Check memory ...
lock found
Check memory Done
Write ...
Erasing: lock-area
Writing: lock-area
Write Done
Finished, time used: 104 sec
Remove/Install battery now !

 

[NANAIU]

answer: Successfully unlocked/repaired phones by Infinity-Box

LG_KG195_IMEI_REPAIRED_SUCCESSFULLY,

HERE THE LOG

Action: imei
Model: LG-KG195
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6226, E02
Hardware version: FP_0620
Software version: 7S7332SA00-001"
Software date: 2005.04.12
Barcode: MT012345678901234567
imei: 135790246811220
imei write method: mode-1
imei write channel: imei #1 for dual sim/mono CPU
new imei: 356733010460547
verification Ok
Finished, time used: 37 sec
Power off phone now !

 

[NANAIU]

answer: Successfully unlocked/repaired phones by Infinity-Box

LG_KE_970_UNLOCKED_SUCCESSFULLY,

LOGS

COM11 [VCP0] selected
module v1.58
Device: LG-KE970
Checking data, wait...
Action: unlock
direct unlock
Boot ...
Press and HOLD Power button now !
loading...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud ...
921600
Set Baud Done
Connecting ...
flash: 0089:88B0
Connecting Done
Check hardware ...
Check hardware Done
Check parameters ...
Check parameters Done
backup critical area ...
reading eeprom-static...
file saved: C:\Program Files\InfinityBox\Pana01\LG-KE970_eeprom-static_20081220-134355.B1E.bin
reading eeprom-static2...
file saved: C:\Program Files\InfinityBox\Pana01\LG-KE970_eeprom-static2_20081220-134355.B1E.bin
loading data...
data loaded
imei: 35030526000000100
reading eeprom-security_35030526000000100...
file saved: C:\Program Files\InfinityBox\Pana01\LG-KE970_eeprom-security_35030526000000100_20081220-134356.B1E.bin
reading eeprom-complete_35030526000000100...
file saved: C:\Program Files\InfinityBox\Pana01\LG-KE970_eeprom-complete_35030526000000100_20081220-134356.B1E.bin
backup critical area Done
Check memory ...
Check memory Done
Write ...
Erasing: eeprom-complete
Writing: eeprom-complete
Verifying...
Verify result: 0114
Done
probably you need to restore original imei after unlock process
Write Done
Finished, time used: 26 sec
Remove/Install battery now !

 

[NANAIU]

answer: Successfully unlocked/repaired phones by Infinity-Box

LG_KE_970_IMEI_REPAIRED_SUCCESSFULLY

LOGS

Phone must be SWITCHED ON !
Connecting, wait...
Connection Ok
Action: imei
software version: KE970P40-ARB-V10f-XXX-XX JUN 07 2007+0
original imei: 35612901183211700
new imei: 35612902345211
imei verification Ok
Done
Finished

BR

 

[NANAIU]

answer: Successfully unlocked/repaired phones by Infinity-Box

LG_KP_202_UNLOCKED_SUCCESSFULLY.

LOGS

COM13 [VCP0] selected
Device: LG KP202
Checking data, wait...
advanced flash detection active
Action: unlock
unlock method: standard
Boot...
Phone must be POWERED-OFF !
Press and HOLD Power button !
Connecting, wait...
Release Power button !
flash: 01227E223C2200:FEEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 007Ex040000 0004x010000] 32Mb
id: 00005258
Boot Done
Set baud...
115200
Set baud Done
Check flash...
current eeprom imei: 354912013769391
current otp imei: 354912013769391
file saved: C:\Program Files\InfinityBox\LGA\backup_eeprom_35491201376939 1_LG KP202_20080704-223008.B1E.bin
...
version: ure----LGELECKP20204d
Check flash Done
Check space...
current eeprom imei: 354912013769391
.................................
finalization done
Check space Done
Check parameters...
Check parameters Done
Erase...
Erase Done
Write...
write: lock area-1
Write Done
Finished, time used: 61 sec
Remove/Install battery now !

 

[NANAIU]

answer: Successfully unlocked/repaired phones by Infinity-Box

MOTOROLA_W_377_UNLOCKED_SUCCESSFULLY

LOGS

COM8 [VCP0] selected
module v1.30
Loading data, wait...
Device: Motorola-W377
Action: unlock
Press Power button now !
rom version: 0411
Connecting...
booting...
finalizing...
working, one more step...
flash: 0089:8813
working...
Finished, time used: 101 sec
Remove/Install battery now !