Successfully unlocked/repaired phones by Infinity-Box

[NANAIU]

answer: Successfully unlocked/repaired phones by Infinity-Box

SIEMENS_ST_60_UNLOCKED_SUCCESSFULLY.

LOGS

COM5 [VCP2] selected
Device: Siemens-ST55,ST60
Checking data, wait...
Action: Unlock
Boot...
Press and HOLD Power button !
Connecting, wait...
Release Power button !
flash: 98007400000002:18E59F00000000
flash: Toshiba 50VSF5782 T 8Mb
id: 00005250
Boot Done
Set baud...
115200
Set baud Done
Check Flash...
Check Flash Done
Check space...
file saved: C:\Program Files\InfinityBox\QModule\backup_eeprom_unlock-1_20080306-164409.05E.bin
Check space Done
Check parameters...
Check parameters Done
Format file system...
Format file system Done
Write...
Preparing...
area requested/selected: 02/02
Write Done
Finished
Remove/Install battery now !
Time used: 55 sec

 

[NANAIU]

answer: Successfully unlocked/repaired phones by Infinity-Box

SAGEM_MY_225_UNLOCKED_SUCCESSFULLY

LOGS

COM4 [VCP0] selected
module v1.53
Device: Sagem-my220x
Checking data, wait...
Action: unlock
unlock method-1
Boot...
Press and HOLD Power button now (if boot does not start remove/install batery) !
loading...
middle part...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud...
921600
Set Baud Done
Connecting...
flash: 0001:011A
Connecting Done
Check hardware...
Check hardware Done
Check parameters...
Check parameters Done
backup critical area...
reading [eeprom-sta]...
file saved: C:\Archivos de programa\InfinityBox\Pana01\Sagem-my220x_eeprom-sta_20081107-094433.B1E.bin
loading data...
data loaded
reading [eeprom-sec]...
file saved: C:\Archivos de programa\InfinityBox\Pana01\Sagem-my220x_eeprom-sec_20081107-094436.B1E.bin
reading [eeprom-complete]...
file saved: C:\Archivos de programa\InfinityBox\Pana01\Sagem-my220x_eeprom-complete_20081107-094438.B1E.bin
reading additional data...
done
backup critical area Done
Check memory...
current status: 0
Check memory Done
Write...
Erasing: lock-area
Writing: lock-area
Write Done
Finished, Remove/Install battery now !
Time used: 39 sec

Unlock instruction:
1. Power-On phone
2. Enter code: 12345678

 

[NANAIU]

answer: Successfully unlocked/repaired phones by Infinity-Box

VODAFONE_226_UNLOCKED_SUCCESSFULLY

LOGS

COM14 [Serial2] selected
Device: Sagem-my226
Checking data, wait...
Action: unlock
unlock method-1
Boot...
Press and HOLD Power button now (if boot does not start remove/install batery) !
loading...
middle part...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud...
921600
Set Baud Done
Connecting...
flash: 0001:011A
Connecting Done
Check hardware...
sw version: EBI_IH 280607_1821 EBI_IH_280607_1821 Thhmm Dddmmmyyyy 01234567
Check hardware Done
Check parameters...
Check parameters Done
backup critical area...
reading [eeprom-sta]...
file saved: C:\Program Files\InfinityBox\Pana01\Sagem-my226_eeprom-sta_20081108-203200.B1E.bin
loading data...
data loaded
reading [eeprom-sec]...
file saved: C:\Program Files\InfinityBox\Pana01\Sagem-my226_eeprom-sec_20081108-203204.B1E.bin
reading [eeprom-complete]...
file saved: C:\Program Files\InfinityBox\Pana01\Sagem-my226_eeprom-complete_20081108-203210.B1E.bin
reading additional data...
done
backup critical area Done
Check memory...
current status: 0
Check memory Done
Write...
Erasing: lock-area
Writing: lock-area
Write Done
Finished, Remove/Install battery now !
Time used: 188 sec

Unlock instruction:
1. Power-On phone
2. Enter code: 12345678

 

[NANAIU]

answer: Successfully unlocked/repaired phones by Infinity-Box

Action: imei
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6225, E03
Hardware version: ZTEMT25_07A_HW_A
Software version: I766_V2_Z1_S_A0FA108
Software date: 2006.06.14
Barcode: 50010811229148854567500833220409 101
imei: 357963010565925
imei write method: mode-1
imei write channel: imei #1 for dual sim/mono CPU
new imei: 0129216219xxxxxx
verification Ok
Finished, time used: 5 sec
Power off phone now !

 

[NANAIU]

answer: Successfully unlocked/repaired phones by Infinity-Box

Hello

China Touch Screen Calibaration.

COM17 [Serial2] selected
module v2.81
Action: touchscreen calibration
mode: 5
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:9E03:0008
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: LittleFatB_R1.0.99.1
Version: PROWAVE25_GEMINI_HW
detecting structure #2...
5 11 done
67 byte(s) read
imei: 13579024681122
warning: current phone imei is incorrect !
It's need to repair imei for correct phone functionality !
connection Ok
detecting structure #5 (mode-5)...
0 1 2 done
209 byte(s) read
reading data #2...
writing data...
verification...
verification Ok
Finished, time used: 20 sec
Remove/Install battery now !

 

[NANAIU]

answer: Successfully unlocked/repaired phones by Infinity-Box

Hello

LG Kp100 Unlocked Successfully

==== log: [4/26/2009 10:19:47 AM] ====
COM5 [VCP0] selected
module v1.60
Device: LG-KP100
Checking data, wait...
Action: unlock
direct unlock method #2 (Airtel etc.)
Boot ...
Press and HOLD Power button now !
loading...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud ...
921600
Set Baud Done
Connecting ...
flash: 0001:011A
Connecting Done
Check hardware ...
sw version: .01 ULC2GL 2008-03-06 1.0 TMO_UK KP100 01 FL 44 V10a 234-30 M
Check hardware Done
Check parameters ...
Check parameters Done
backup critical area ...
reading eeprom-static...
file saved: C:\Program Files\InfinityBox\Pana01\LG-KP100_eeprom-static_20090426-002052.B1E.bin
loading data...
data loaded
imei: 35947602191184600
reading eeprom-security_35947602191184600...
file saved: C:\Program Files\InfinityBox\Pana01\LG-KP100_eeprom-security_35947602191184600_20090426-002053.B1E.bin
reading eeprom-complete_35947602191184600...
file saved: C:\Program Files\InfinityBox\Pana01\LG-KP100_eeprom-complete_35947602191184600_20090426-002054.B1E.bin
backup critical area Done
Check memory ...
Check memory Done
Write ...
Erasing: eeprom-security
Writing: eeprom-security
probably you need to restore original imei after unlock process
Write Done
Finished, time used: 66 sec
Remove/Install battery now !

 

[NANAIU]

answer: Successfully unlocked/repaired phones by Infinity-Box

Hello

Zong A136 Unlocked Successfully

==== log: [4/26/2009 9:57:54 AM] ====
COM5 [VCP0] selected
module v1.60
Device: Zong-A136
Checking data, wait...
Action: unlock
unlock method-1
Boot ...
Press and HOLD Power button now !
loading...
next part...
boot answer: 01
Release Power button now
Boot Done
Set Baud ...
921600
Set Baud Done
Connecting ...
flash: 00EC:257E
Connecting Done
Check hardware ...
sw version: PAK-P108A2V1.0.0B01 CMPAK-P108A2B07-En-PK01 g3dBV2.0 Apr 24 2008
Check hardware Done
Check parameters ...
Check parameters Done
backup critical area ...
reading eeprom-static...
file saved: C:\Program Files\InfinityBox\Pana01\Zong-A136_eeprom-static_20090426-215811.B1E.bin
loading data...
data loaded
reading eeprom-security...
file saved: C:\Program Files\InfinityBox\Pana01\Zong-A136_eeprom-security_20090426-215812.B1E.bin
reading eeprom-complete...
file saved: C:\Program Files\InfinityBox\Pana01\Zong-A136_eeprom-complete_20090426-215813.B1E.bin
reading additional data...
file saved: C:\Program Files\InfinityBox\Pana01\Zong-A136_lock-area_20090426-215816.B1E.bin
backup critical area Done
Check memory ...
lock found
Check memory Done
Write ...
Erasing: lock-area
Writing: lock-area
Write Done
Finished, time used: 30 sec
Remove/Install battery now !

 

[NANAIU]

answer: Successfully unlocked/repaired phones by Infinity-Box

LG Kp130 Unlocked Successfully ==== log: [4/26/2009 11:45:22 AM] ====
COM3 [VCP1] selected
module v1.38
Device: LG-KP130
Checking data, wait...
advanced flash detection enabled
Action: unlock
unlock method: standard
Boot ...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting, wait...
Release Power button now !
flash: 01227E22212200:FEEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
id: 00005258
Boot Done
Set baud ...
115200
Set baud Done
Check flash ...
current eeprom imei: 35212602xxxxxxxxxxx
file saved: C:\Program Files\InfinityBox\LGA\eeprom_35212602xxxxx_LG-KP130_20090426-114601.B1E.bin
........
version: -
Check flash Done
Check space ...
current eeprom imei: 3521260xxxxxxxxxxxx
finalization done
Check space Done
Check parameters ...
Check parameters Done
Erase ...
Erase Done
Write ...
write: lock area-1
Write Done
Finished, time used: 55 sec
Remove/Install battery now !

 

[NANAIU]

answer: Successfully unlocked/repaired phones by Infinity-Box

NOKIA 5310 RESTART WITH SIM OK

COM3 [VCP0] selected
module v2.73
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:1303:000A
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6225,E03
Date: 2006.06.14
Version: 1.0
Version: HB5M411B1.7.1.1.11T11M0317_M411B
Version: X225B_HW
detecting structure #2...
0 done
44 byte(s) read
imei: 35865301218937
connection Ok
building list...
done
items to clear: 200
items cleared: 139 of 200
items remains: 0
Finished, time used: 307 sec
Remove/Install battery now !

 

[NANAIU]

answer: Successfully unlocked/repaired phones by Infinity-Box

phone come me with restart after power on problem.
i can backup Eeprom, full flash, reset phone with Bmodul Ver1.31 and E61 model.
Pls add this model for all infinity user.
Log here :

COM6 [VCP3] selected
module v1.31
Device: BenQ E61
Checking data, wait...
Action: read eeprom
Boot...
Phone should be Switched OFF !
Press Power button now !
Connecting...
Boot Done
Check Connection...
Check Connection Done
Set Baud...
Set Baud Done
Check Flash...
error: Probably wrong model selected.
Continue anyway ?
Check Flash Done
Check Parameters...
file saved: C:\Program Files\InfinityBox\BModule\eeprom_ffs_20090426-114428.7FF.bin
Flash: 0089:881500010001
Flash: 0089:881500010001
Finished, time used: 282 sec
Remove/Install battery now !

==== log: [4/26/2009 11:44:41 AM] ====
COM6 [VCP3] selected
module v1.31
Device: BenQ E61
Checking data, wait...
Action: read flash
Boot...
Phone should be Switched OFF !
Press Power button now !
Connecting...
Boot Done
Check Connection...
Check Connection Done
Set Baud...
Set Baud Done
Check Flash...
error: Probably wrong model selected.
Continue anyway ?
Check Flash Done
Check Parameters...
part 1 of 2...
Reading...
Flash: 0089:881500010001
file saved: C:\Program Files\InfinityBox\BModule\full_part_1_of_2_2009042 6-115725.7FX.bin
part 2 of 2...
Reading...
Flash: 0089:881500010001
file saved: C:\Program Files\InfinityBox\BModule\full_part_2_of_2_2009042 6-121103.7FX.bin
Finished, time used: 1584 sec
Remove/Install battery now !
Warning ! Settings will be cleared, user data erased !
Do you want to continue ?

==== log: [4/26/2009 12:11:17 PM] ====
COM6 [VCP3] selected
module v1.31
Phone must be switched OFF !
Press Power button !
Connection Ok
error: operation failed, try again
Warning ! Settings will be cleared, user data erased !
Do you want to continue ?

==== log: [4/26/2009 12:12:16 PM] ====
COM6 [VCP3] selected
module v1.31
Phone must be switched OFF !
Press Power button !
Connection Ok
Done

Thanks advance infinity team!

 

[NANAIU]

answer: Successfully unlocked/repaired phones by Infinity-Box

lg kg 195 unlock ok

COM3 [VCP0] selected
module v2.58
Action: read codes
unlock method: read codes
Model: LG-KG195
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6226:8A02:8A01]...
CPU: MT6226
chip: 0031:03C1:0896
Connecting, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6226,E02
Date: 2005.04.12
Version: 1.0
Version: 7S7332SA00-001-R1A
Version: FP_0620
60 byte(s) read
imei: 35673201052864
connection Ok
208 byte(s) read
Phone lock: Off
Network lock: Off
Network subset lock: Off
Service provider lock: Off
Corporate lock: Off
IMSI lock: Off
Auto lock: Off
Phone code: 6006000F
Finished, time used: 14 sec
Remove/Install battery now !

 

[NANAIU]

answer: Successfully unlocked/repaired phones by Infinity-Box

COM1 [VCP0] selected
Action: unlock
Device: C139,C140
Checking data, wait...
Connect...
Press and HOLD Power button...
connection mode: 00
Release Power button !
Connect Done
Boot...
Boot Done
Set Baud...
115200
Set Baud Done
Check Flash-1...
SW version: 1.0.03.E.
HW version: _E88
LP ver: LPE_C139_EMEA_T1_10C
Flex ver: FFE_C139_4B_10C
imei otp: 359193002069672
Check Flash-1 Done
Check Flash-2...
reading ...
file saved: C:\Program Files\InfinityBox\Moto01\backup_eeprom_calibration _359193002069672_20090426-022547.31E.bin
imei eeprom: 359193002069672
Check Flash-2 Done
Write...
Write Done
Finished, time used: 20 sec
Remove/Install battery now !

thanks infinity team

 

[NANAIU]

answer: Successfully unlocked/repaired phones by Infinity-Box

sony ericsson t303 unlocked
*********
COM2 [VCP1] selected
module v1.30
Device: Sony-Ericsson-T303
"advanced chip detection" active
Action: unlock
Checking data, wait...
Boot ...
Phone should be Switched OFF !
Press Power button now !
rom version: 0502
Connecting...
booting...
finalizing...
Boot done
Check connection ...
Check connection done
Set baud ...
812500
Set baud done
Check hardware ...
flash: 89890400040089:89890400000000
flash: Intel ST [def 0080x040000] 32Mb
software version: 1209-8242
software version: R2CC001
Check hardware done
Read data ...
reading Sony-Ericsson-T303_eeprom_calibration-1...
file saved: C:\Program Files\InfinityBox\HModule\Sony-Ericsson-T303_eeprom_calibration-1_20090427-101311.80E.bin
Read data done
Check data ...
Check data done
Write ...
...........................
flash: 89890400040089:89890400000000
Write: simlock
Write done
Finished, time used: 111 sec
Remove/Install battery now !

 

[NANAIU]

answer: Successfully unlocked/repaired phones by Infinity-Box

COM3 [VCP0] selected
module v2.65
Action: unlock
unlock method: smart fast
Model: ZTE-A211
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:3E6C:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E05
Date: 2000.00.00
Version: 1.0
Version: PE-PT-TMN-P109A2V1.0.3B06
Version: 07AZTENJ23_07A_PMJ
44 byte(s) read
imei: 355**********
connection Ok
157 byte(s) read
reading data...
building new data...
writing data...
145 byte(s) read
reading data...
building new data...
writing data...
verifying...
verification Ok
done
Finished, time used: 13 sec
Remove/Install battery now !

 

[NANAIU]

answer: Successfully unlocked/repaired phones by Infinity-Box

COM10 [VCP0] selected
Action: unlock
Device: C139,C140
Checking data, wait...
Connect...
Press and HOLD Power button...
connection mode: 02
Release Power button !
Connect Done
Boot...
Boot Done
Set Baud...
115200
Set Baud Done
Check Flash-1...
SW version: 1.3.29
HW version: _E88
LP ver: LPH_C139_ASIA2_Z1C
Flex ver: FFH_C139_67_Z1C
imei otp: 351975010655528
Check Flash-1 Done
Check Flash-2...
reading ...
file saved: C:\Program Files\InfinityBox\Moto01\backup_eeprom_calibration _351975010655528_20090423-161116.31E.bin
imei eeprom: 351975010655528
extra method pass-1...
reading ...
extra method pass-2...
Check Flash-2 Done
Write...
Write Done
Finished, time used: 117 sec
Remove/Install battery now !