GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

GFIVE 6700I hang and restart just reset phone working fine. log here

Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM125
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 115200 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_ST_M58WR064KT
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Analyzing FileSystem...
Done.
Reset the user data area...
Note: if user partition size is more than 4MB, The phone would may

take 1 minute to rebuild FileSystem after Reset Action.
All Done.
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

A-GSM UNLOCK OK!!!!
phone cpu: spd sl6600
phone staut: phone lock
action: read code


Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
D-=8 D+=9
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM324
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700500005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_K5L6331CAA
setting the Flash Parameters...
Settings have been completed!
Connect and search Security Code...
Privacy protect: 1
PhoneLock: 99166606
Privacy protect: 99166606
Done.
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

PHONE MODEL:C1000+
CPU:SC6600R SPD
PHONE STATUT: PHONE LOCK
ACTION: READ CODE
INFO:
Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
D-=9 D+=8
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM324
Connected...sending boot...
FDL test...OK
ArmBootMode: 660080002C42A0FF_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600R Flash: NAND_HY27XS08121M
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 80
IMEI 1=354101000532141
IMEI 2=354101000532141
Length of running NV=0x00200000
Read FS info...done

READ CODE
Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast...
D-=9 D+=8
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM324
Connected...sending boot...
FDL test...OK
ArmBootMode: 660080002C42A0FF_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600R Flash: NAND_HY27XS08121M
setting the Flash Parameters...
Settings have been completed!
Connect and search Security Code...
PhoneLock: 2988
Privacy protect: 2988
 Privacy protect: 1
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

phone marque: OKING
phone model:C53
phone statut: HANG OND OKING
ACTION: FORMATING
état:working
Initializing...
DA_LIB_VER_3.2.0.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=5 TXD=3
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0001227E22102201
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: 6223_C53_HPG_ML_OKING_8M_v05
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00750000, size=0x000B0000
All Done
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

HI TO ALL just UNLOCKED HUAWEI UFONE PAKISTAN G6600 WITH GPG DRAGON
wink.gif


I just made format operation and put other carrier sim-fone unlocked only by format
wink.gif
imei gone 0000000000 but just rebuild imei and you'r done
biggrin.gif


HERE IS SCREEN SHOT

eunib6.jpg


xohcv5.jpg



DRAGON SHINING
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

spd SC6600R can't receive message and call done by reset

Initializing...
DA_LIB_VER_3.2.1.3
It is sensing the pinout fast...
D-=20 D+=21
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM50
Connected...sending boot...
FDL test...OK
ArmBootMode: 660080000C42A0FF_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 115200 ok
Reading phone HW info...
Read info is done.
CPU: SC6600R Flash: NOR_K5L6331CAA
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Analyzing FileSystem...
Done.
Reset the user data area...
Note: if user partition size is more than 4MB, The phone would may take 1 minute to rebuild FileSystem after Reset Action.
All Done.
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

G five E71y phone lock done

Initializing...
DA_LIB_VER_3.2.1.3
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=17 TXD=23
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
Code=0002
Code=0010
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

MTEL L800 IMEI Change Initializing...
DA_LIB_VER_3.2.0.5
It is sensing the pinout fast,please hold on the phone Power key
RXD=6 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: R206AF_ANX_F14_MTEL_V01_100122


read flash

Initializing...
DA_LIB_VER_3.2.0.5
It is sensing the pinout fast,please hold on the phone Power key
RXD=6 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: R206AF_ANX_F14_MTEL_V01_100122
Changing baudrate to 921600...
Done.
Reading full Flash...
All Done.
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

MTK FORMAT DONE

1661 CHINESE clone fone
HERE IS LOG

Initializing...
DA_LIB_VER_3.2.1.3
It is sensing the pinout fast,please hold on the phone Power key
RXD=4 TXD=3
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6223, HardwareVer:8A04, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC257E25062501
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: GOTECH_SW_A9_5.7LCF
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00700000, size=0x00100000
All Done


HERE IS FULL FLASH PLEASE DOWNLOAD CLICK HERE

pinouts

dzfluv.jpg
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Lephone C8 format done

Initializing...
DA_LIB_VER_3.2.1.3
It is sensing the pinout fast...
RXD=23 TXD=17
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100006A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_ST_M58WR064KT
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x007B0000, Size=0x00040000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

LEPHONE C5 UNLOCK PHONE CODE OK!!!!!
-------------------Created: 4/11/2011 9:10:54 AM-------------------
Chip=SpreadTrum
Action=ReadInfo
FlashType=NOR
boot=6600L/WT6226-USB
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=
Comport=COM315
Baudrate=921600
CPU_Type=SC6600L2
CPU_ID=66007001
NOR_ID=0001227E22102201
NOR_Size=8MB
NOR_Name=NOR_S29GL064A_T
NOR_DieCnt=1
NAND_ID=
NAND_Size=
NAND_Name=
Initializing...
DA_LIB_VER_3.2.1.3
It is sensing the pinout fast...
+++++++++++++++++++End at: 4/11/2011 9:11:17 AM+++++++++++++++++++
-------------------Created: 4/11/2011 9:11:29 AM-------------------
Chip=SpreadTrum
Action=Unlock
FlashType=NOR
boot=6600L/WT6226-USB
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=
Comport=COM315
Baudrate=921600
CPU_Type=SC6600L2
CPU_ID=66007001
NOR_ID=0001227E22102201
NOR_Size=8MB
NOR_Name=NOR_S29GL064A_T
NOR_DieCnt=1
NAND_ID=
NAND_Size=
NAND_Name=
Initializing...
DA_LIB_VER_3.2.1.3
It is sensing the pinout fast...
D-=8 D+=9
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM324
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_S29GL064A_T
setting the Flash Parameters...
Settings have been completed!
Connect and search Security Code...
Privacy protect: 9
PhoneLock: 25800000
Theft proof: 120775
 Privacy protect: 0775
 Done.
+++++++++++++++++++End at: 4/11/2011 9:12:02 AM+++++++++++++++++++
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Matrix M1 format done incoming problem solved.

Initializing...
DA_LIB_VER_3.2.1.3
It is sensing the pinout fast,please hold on the phone Power key
RXD=4 TXD=5
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 002088C400000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: M8708_TP_T3W0_PRAY_GRIGHT_V03
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Initializing...
DA_LIB_VER_3.2.1.3
It is sensing the pinout fast,please hold on the phone Power key
RXD=2 TXD=5
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 00EC240400000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: L5BMM03.9.52.1.2T07M0803_M700
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

ITEL X2 PHONE CODE DONE

Initializing...
DA_LIB_VER_3.2.1.3
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=7 TXD=9
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
Code=2525
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Qmobile E400 phone lock done

Initializing...
DA_LIB_VER_3.2.1.3
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=1 TXD=10
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
Code=0011
 
You must log in or register to reply here.
Prev Thread | Next Thread
Back
Top