GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
D-=8 D+=9
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM19
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: 66007001 Flash: NOR_ST_M58WR064KT
Set FLASH Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 0A
IMEI 1=350697101295888
IMEI 2=359128031265768
--------NOR_FLASH_CONFIG--------
Flash Bank count=0
EFS sector count=0
File sector count=0
Sector size=0x00000000
Flash start addr=0x00000000
Flash size=0x00800000
Fix NV addr=0x0083E000
Product information addr=0x00863000
MMI resource addr=0x008C1800
------Auto Format Address-------
Start=0x00000000
Size =0x00063000
Read FS info...don
Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
D-=8 D+=9
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM19
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: 66007001 Flash: NOR_ST_M58WR064KT
Set FLASH Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 0A
IMEI 1=350697101295888
IMEI 2=359128031265768
--------NOR_FLASH_CONFIG--------
Flash Bank count=0
EFS sector count=0
File sector count=0
Sector size=0x00000000
Flash start addr=0x00000000
Flash size=0x00800000
Fix NV addr=0x0083E000
Product information addr=0x00863000
MMI resource addr=0x008C1800
------Auto Format Address-------
Start=0x00000000
Size =0x00063000
Read FS info...don
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
chip 6253 imei changing done !
Initializing...
DA_LIB_VER_2.5.1.2
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=1 TXD=4
Connecting...Please hold on the ON/OFF key...
Connecting, Please turn on the phone...
Connected! Checking IMEI...
Original IMEI 1= +EGMR: ""
OK
IMEI 1 rebuild has been implemented: 351245784512458
Original IMEI 2= +EGMR: ""
OK
IMEI 2 rebuild has been implemented: 357845124785124
Need to restart the phone to verify new imei.
chip 6253 imei changing done !
Initializing...
DA_LIB_VER_2.5.1.2
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=1 TXD=4
Connecting...Please hold on the ON/OFF key...
Connecting, Please turn on the phone...
Connected! Checking IMEI...
Original IMEI 1= +EGMR: ""
OK
IMEI 1 rebuild has been implemented: 351245784512458
Original IMEI 2= +EGMR: ""
OK
IMEI 2 rebuild has been implemented: 357845124785124
Need to restart the phone to verify new imei.
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM14
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700500005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_ST_M58WR064HU
Set FLASH Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x007A0000, Size=0x00050000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.
Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM14
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700500005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_ST_M58WR064HU
Set FLASH Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x007A0000, Size=0x00050000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
I IM SECOND, CHERRY MOBILE M33 PHONE LOCK DONE
SEE SOME TIPS
boot 3.8 says
Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=6 TXD=8
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Unsupport CPU, Please select another boot and retry again!
used 3.10 but slow.
read; use intRAM
track code
I IM SECOND, CHERRY MOBILE M33 PHONE LOCK DONE
SEE SOME TIPS
boot 3.8 says
Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=6 TXD=8
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Unsupport CPU, Please select another boot and retry again!
used 3.10 but slow.
read; use intRAM
track code
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
nitializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=4 TXD=5
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC257E25082501
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: M5171_ZHH_NOKIA_NOTOUCH_KEY55_EN+FR+AR+TU+BO+SP+PO _23QVGA_A02
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
nitializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=4 TXD=5
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC257E25082501
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: M5171_ZHH_NOKIA_NOTOUCH_KEY55_EN+FR+AR+TU+BO+SP+PO _23QVGA_A02
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
D-=10 D+=7
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM23
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: 66007001 Flash: NOR_TV00560002EDGB
Set FLASH Parameters...
Settings have been completed!
Connect and search Security Code...
PhoneLock: 123
PhoneLock: 2345
Privacy protect: 1234
Done.
Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
D-=10 D+=7
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM23
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: 66007001 Flash: NOR_TV00560002EDGB
Set FLASH Parameters...
Settings have been completed!
Connect and search Security Code...
PhoneLock: 123
PhoneLock: 2345
Privacy protect: 1234
Done.
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
FERRARI K66 USER CODE DONE!!!
Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
D-=2 D+=3
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM324
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700500025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 460800 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_S29GL064A_T
Set FLASH Parameters...
Settings have been completed!
Connect and search Security Code...
PhoneLock: 9790
Privacy protect: 1234
Done.
FERRARI K66 USER CODE DONE!!!
Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
D-=2 D+=3
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM324
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700500025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 460800 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_S29GL064A_T
Set FLASH Parameters...
Settings have been completed!
Connect and search Security Code...
PhoneLock: 9790
Privacy protect: 1234
Done.
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
NOKIA KZKJ Q8 IMEI REPAIR DONE!!!!
Initializing...
DA_LIB_VER_2.5.1.2
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=6 TXD=5
Connecting...Please hold on the ON/OFF key...
Connecting, Please turn on the phone...
Connected! Checking IMEI...
Original IMEI 1= +EGMR: ""
OK
IMEI 1 rebuild has been implemented: 355037012497817
Original IMEI 2= +EGMR: ""
OK
IMEI 2 rebuild has been implemented: 355037012497825
Need to restart the phone to verify new imei
NOKIA KZKJ Q8 IMEI REPAIR DONE!!!!
Initializing...
DA_LIB_VER_2.5.1.2
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=6 TXD=5
Connecting...Please hold on the ON/OFF key...
Connecting, Please turn on the phone...
Connected! Checking IMEI...
Original IMEI 1= +EGMR: ""
OK
IMEI 1 rebuild has been implemented: 355037012497817
Original IMEI 2= +EGMR: ""
OK
IMEI 2 rebuild has been implemented: 355037012497825
Need to restart the phone to verify new imei
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
nitializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=2 TXD=3
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: MAUI.08B.W08.52.MP.V22.F2
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
nitializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=2 TXD=3
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: MAUI.08B.W08.52.MP.V22.F2
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=6 TXD=4
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC257E25062501
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: 1208_EN_SS_V1.0
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00700000, size=0x00100000
All Done
Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=6 TXD=4
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC257E25062501
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: 1208_EN_SS_V1.0
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00700000, size=0x00100000
All Done
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
read full flash here..
Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
RXD=5 TXD=8
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700000020000_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_TV00570002xDGB
Set FLASH Parameters...
Settings have been completed!
Reading Flash...
All Done.
unlock here..
Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
RXD=5 TXD=8
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700000020000_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_TV00570002xDGB
Set FLASH Parameters...
Settings have been completed!
Connect and search Security Code...
Privacy protect: 9
Privacy protect: 0
Privacy protect: 8
Privacy protect: 25520
PhoneLock: 25520
Done.
read full flash here..
Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
RXD=5 TXD=8
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700000020000_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_TV00570002xDGB
Set FLASH Parameters...
Settings have been completed!
Reading Flash...
All Done.
unlock here..
Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
RXD=5 TXD=8
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700000020000_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_TV00570002xDGB
Set FLASH Parameters...
Settings have been completed!
Connect and search Security Code...
Privacy protect: 9
Privacy protect: 0
Privacy protect: 8
Privacy protect: 25520
PhoneLock: 25520
Done.