GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Initializing...
DA_LIB_VER_2.4.4.7
It is sensing the pinout fast...
D-=2 D+=3
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM11
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700538E3A000_01
Wait for init SB...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_TV00560002EDGB
Set FLASH Parameters...
Settings have been completed!
Connect and search Security Code...
Privacy protect: 1629
Theft proof: 123456
PhoneLock: 12345
Done.







 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!








Initializing...
DA_LIB_VER_2.4.4.7
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone

Power key
RXD=7 TXD=9
Connecting...Please hold on the ON/OFF key...
BB:6235, HardwareVer:8A01, SoftwareVer:8A04
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

GPGDragon Test MTK6223 M36L0T7050TO


GPGDragonTestMTK6223M36L0T7050TO.jpg
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!


CPU: SC6600R




Initializing...
DA_LIB_VER_2.4.4.7
It is sensing the pinout fast...
D-=9 D+=8
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM11
Connected...sending boot...
FDL test...OK
ArmBootMode: 660080002C42A0FF_01
Wait for init SB...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600R Flash: NAND_HY27XS08121M
Set FLASH Parameters...
Settings have been completed!
Connect and search Security Code...
Privacy protect: 102201
PhoneLock: 45678
Privacy protect: 9
Done.
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

PHONELOCK READED EASY






ASUS J202

Initializing...
DA_LIB_VER_2.4.4.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=2 TXD=3
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6219, HardwareVer:8A01, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0001227E22202200
Nand Flash ID: 00EC007900A500C0
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID:
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Spd USB-to-Serial=COM11
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700538E3A000_01
Wait for init SB...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_TV00560002EDGB
Set FLASH Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x00790000, Size=0x00060000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=2
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6235, HardwareVer:8A01, SoftwareVer:8A04
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0000000000000000
Nand Flash ID: 009800D100900015
Read Hardware Information is done.
Get Project ID from phone...
Project ID: L011_ML_TY8A_TV1_FM1_EN1_SM_ML_V4.01
Changing baudrate to 460800...
Done.
Formating Flash...
All Done


 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

First you need read back the flash file
save to computer
use gpgdragon software ,select tool
very easy unlock mobile
gpgdragon_test_7880_unlock.jpg
 
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Initializing...
DA_LIB_VER_2.4.4.9
It is sensing the pinout fast,please hold on the phone Power key
RXD=4 TXD=3
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6219, HardwareVer:8B02, SoftwareVer:8B01
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 00EC22E000000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: MAUI.06A.W06.08.01
Changing baudrate to 921600...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
 
You must log in or register to reply here.
Prev Thread | Next Thread
Back
Top