answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!
first in gpgdragon unlock zte s213 lock by azur(rca) done!!!!!
READ INFO:
Chip=MTK
Action=ReadInfo
FlashType=NOR
boot=Ver3.1108
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=
Comport=COM318
Baudrate=921600
CPU_Type=MT6223
CPU_ID=7263000C
NOR_ID=0098009600000000
NOR_Size=8MB
NOR_Name=[TOSHIBA] TV00560002EDGB
NOR_DieCnt=
NAND_ID=0000000000000000
NAND_Size=0MB
NAND_Name=Nand:N/A
Initializing...
DA_LIB_VER_3.4.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=8 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098009600000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI(Nor Flash only)...
H/W detection ok.
Get Project ID from phone...
Project ID: FE-CA-AZUR9D-P109A14V1.0.0B03
FORMATING DONE
Chip=MTK
Action=Format
FlashType=NOR
boot=Ver3.1108
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=
Comport=COM318
Baudrate=921600
CPU_Type=MT6223
CPU_ID=7263000C
NOR_ID=0098009600000000
NOR_Size=8MB
NOR_Name=[TOSHIBA] TV00560002EDGB
NOR_DieCnt=
NAND_ID=0000000000000000
NAND_Size=0MB
NAND_Name=Nand:N/A
Initializing...
DA_LIB_VER_3.4.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=8 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098009600000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI(Nor Flash only)...
H/W detection ok.
Get Project ID from phone...
Project ID: FE-CA-AZUR9D-P109A14V1.0.0B03
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00700000, size=0x00100000
All Done
REPAIR IMEI:
Chip=MTK
Action=IMEI
FlashType=NOR
boot=Ver3.1108
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=
Comport=COM318
Baudrate=921600
Initializing...
DA_LIB_VER_3.4.1.2
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=8 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
IMEI=355473026000000
IMEI=355473026000000
Rebulid IMEI1=353056941620796
Rebulid IMEI2=353056758126754
UNLOCK DONE:
Chip=MTK
Action=netword unlock
FlashType=NOR
boot=Ver3.1108
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=
Comport=COM318
Baudrate=921600
Initializing...
DA_LIB_VER_3.4.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=8 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
checking network/sp/sim lock status...
Unlock done.
