GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

[Jonab Ru]

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

6300 flashing done

Initializing...
DA_LIB_VER_3.4.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=4 TXD=3
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6226, HardwareVer:8A02, SoftwareVer:8A01
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098004900000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI(Nor Flash only)...
H/W detection ok.
Get Project ID from phone...
Project ID: MAUI.08B.W09.08.MP.V2
Changing baudrate to 921600...
Done.
Analysis the file, Some file may need a long time...
The file has not been encrypted.
Downloading Flash file...
All Done.

 

[Jonab Ru]

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

cherry mobile D20i lock code

read fash
go to free tools
Read Code/phoneBook in file
Chips:Infineon_7870
sec./chips Infineon_7870
hit search and find back up files
Code=64463
Done.



Initializing...
DA_LIB_VER_3.4.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=5 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 0001007E00630001
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: MAUI.09A.W09.52.C065.FLP.10.42
Changing baudrate to 115200...
Done.
Reading full Flash...
Saved file to:
C:\Documents and Settings\Ainun jannah\My Documents\n
All Done.

 

[Jonab Ru]

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

im sorry this mtk chips 6253

Initializing...
DA_LIB_VER_3.4.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=5 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 0001007E00630001
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: MAUI.09A.W09.52.C065.FLP.10.42
Changing baudrate to 115200...
Done.
Reading full Flash...
Saved file to:
C:\Documents and Settings\Ainun jannah\My Documents\n
All Done.

 

[Jonab Ru]

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Club slim dead Alive

Initializing...
DA_LIB_VER_3.4.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=17 TXD=3
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI(Nor Flash only)...
H/W detection ok.
Get Project ID from phone...
Project ID: MAUI.GEMINI.W08.12.129
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done

 

[Jonab Ru]

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

 

[Jonab Ru]

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

 

[Jonab Ru]

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

china phone iphone 3g no service problem done via format and change imei

Initializing...
DA_LIB_VER_3.4.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=13 TXD=11
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6235, HardwareVer:8A01, SoftwareVer:8A04
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0000000000000000
Nand Flash ID: 009800D100900015
Read Hardware Information is done.
Get Project ID from phone...
Project ID: F35W_240X320_CLD_IV_TY1G_WIFI_V004
Changing baudrate to 115200...
Done.
Formatting Flash...
AutoFormat address: start=0x04000000, size=0x04000000
All Done

 

[Jonab Ru]

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Q mobile E125 Initializing...
DA_LIB_VER_3.4.1.2
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=7 TXD=9
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
Code=56568

 

[Jonab Ru]

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

u 800 flash file Initializing...
DA_LIB_VER_3.3.4.1
It is sensing the pinout fast,please hold on the phone Power key
RXD=4 TXD=3
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
Boot init completed.
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Reading phone HW info...
Read info is done.
BB: MT6225 Flash: NOR_TV00570002xDGB
setting the Flash Parameters...
Settings have been completed!
Changing baudrate...
Set baudrate to 921600 ...ok
Analysis the file, Some file may need a long time...
The file has not been encrypted.
Unlocking all blocks before program/erase...
Unlock Done.
Programming...
Compare Image: Enable
All Done.

 

[Jonab Ru]

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

A108 3Sim Flash done

Initializing...
DA_LIB_VER_3.4.1.2
It is sensing the pinout fast...
D-=8 D+=9
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM13
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700900005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L7 Flash: NOR_ST_M58WR064KT
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Programming...
Compare Image: Enable
All Done.

 

[Jonab Ru]

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

TOP1 V777 Phone Lock Code

Initializing...
DA_LIB_VER_3.4.1.2
It is sensing the pinout fast...
D-=8 D+=9
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM13
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_S29GL064A_T
setting the Flash Parameters...
Settings have been completed!
Connect and search Security Code...
Privacy protect: 9
PhoneLock: 33333333
PhoneLock: 3333333
PhoneLock: 112233
Privacy protect: 1234
Done.

 

[Jonab Ru]

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Initializing...
DA_LIB_VER_3.4.1.2
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=19 TXD=18
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
Code=8585

 

[Jonab Ru]

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

G1 GMobile format done

Initializing...
DA_LIB_VER_3.4.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=9 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0089890300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI(Nor Flash only)...
H/W detection ok.
Get Project ID from phone...
Project ID: C100A3PLUS.JHZ05.01.110328.01
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done

 

[Jonab Ru]

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Q9 F-11 Read Code

Initializing...
DA_LIB_VER_3.4.1.2
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=9 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
Code=0002
Code=55555

 

[Jonab Ru]

answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

j5000 read code done

Initializing...
DA_LIB_VER_3.4.1.2
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=9 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
Code=6765