rizwankhan8670 2.1.9 exe logo
2014-03-04 1:22:49 PM >>Volcano Updated: 2013-07-08
2014-03-04 1:22:49 PM >>Connecting...
2014-03-04 1:22:51 PM >>Connection successful,connected state!
2014-03-04 1:22:51 PM >>Version: V3.8
2014-03-04 1:22:51 PM >>SN:000-001-660
2014-03-04 1:22:51 PM >>Port:COM6
2014-03-04 1:22:52 PM >>After format or Flash you have to press & hold power button for at least 1.30 mins.
2014-03-04 1:22:52 PM >>Note for win7 users :
2014-03-04 1:22:52 PM >>Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.
2014-03-04 1:22:52 PM >>After that the spd drivers will have the ability to be loaded.
2014-03-04 1:23:04 PM >>Available Ports:COM1 COM2 COM3 COM4 COM5 COM6
2014-03-04 1:23:04 PM >>Detection initiated, connect the phone and power on it...
2014-03-04 1:23:13 PM >>Vcc: 12
2014-03-04 1:23:13 PM >>Gnd: 10 20
2014-03-04 1:23:13 PM >>Analyzing Rx and Tx...
2014-03-04 1:23:32 PM >>Some mobile phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient...
2014-03-04 1:23:37 PM >>User stop
2014-03-04 1:23:37 PM >>Pinouts are not fonud!
2014-03-04 1:23:39 PM >>Detection initiated, connect the phone and power on it...
2014-03-04 1:23:48 PM >>Vcc: 12
2014-03-04 1:23:48 PM >>Gnd: 10 20
2014-03-04 1:23:48 PM >>Analyzing Rx and Tx...
2014-03-04 1:24:07 PM >>Some mobile phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient...
2014-03-04 1:24:23 PM >>User stop
2014-03-04 1:24:23 PM >>Pinouts are not fonud!
2014-03-04 1:29:40 PM >>Volcano Updated: 2013-07-08
2014-03-04 1:29:40 PM >>Connecting...
2014-03-04 1:29:41 PM >>Connection successful,connected state!
2014-03-04 1:29:41 PM >>Version: V3.8
2014-03-04 1:29:41 PM >>SN:000-001-660
2014-03-04 1:29:41 PM >>Port:COM6
2014-03-04 1:29:42 PM >>After format or Flash you have to press & hold power button for at least 1.30 mins.
2014-03-04 1:29:42 PM >>Note for win7 users :
2014-03-04 1:29:42 PM >>Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.
2014-03-04 1:29:42 PM >>After that the spd drivers will have the ability to be loaded.
2014-03-04 1:29:51 PM >>Available Ports:COM1 COM2 COM3 COM4 COM5 COM6
2014-03-04 1:29:51 PM >>Detection initiated, connect the phone and power on it...
2014-03-04 1:30:00 PM >>Vcc: 12
2014-03-04 1:30:00 PM >>Gnd: 10
2014-03-04 1:30:00 PM >>Analyzing Rx and Tx...
2014-03-04 1:30:19 PM >>Some mobile phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient...
2014-03-04 1:30:32 PM >>User stop
2014-03-04 1:30:32 PM >>Pinouts are not fonud!
2014-03-04 1:30:38 PM >>Detection initiated, connect the phone and power on it...
2014-03-04 1:30:47 PM >>Vcc: 12
2014-03-04 1:30:47 PM >>Gnd: 10 20
2014-03-04 1:30:47 PM >>Analyzing Rx and Tx...
2014-03-04 1:31:06 PM >>Some mobile phone must have VCC or GND pins set in order to detect pinouts. Detection requires a longer period of time, please be patient...
2014-03-04 1:33:06 PM >>User stop
2014-03-04 1:33:06 PM >>Pinouts are not fonud!
2014-03-04 1:37:36 PM >>Volcano Updated: 2013-07-08
2014-03-04 1:37:36 PM >>Connecting...
2014-03-04 1:37:38 PM >>Connection successful,connected state!
2014-03-04 1:37:38 PM >>Version: V3.8
2014-03-04 1:37:38 PM >>SN:000-001-660
2014-03-04 1:37:38 PM >>Port:COM6
2014-03-04 1:37:39 PM >>After format or Flash you have to press & hold power button for at least 1.30 mins.
2014-03-04 1:37:39 PM >>Note for win7 users :
2014-03-04 1:37:39 PM >>Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.
2014-03-04 1:37:39 PM >>After that the spd drivers will have the ability to be loaded.
2014-03-04 1:37:48 PM >>Available Ports:COM1 COM2 COM3 COM4 COM5 COM6
2014-03-04 1:37:48 PM >>Detection initiated, connect the phone and power on it...
2014-03-04 1:37:50 PM >>Vcc: 12
2014-03-04 1:37:50 PM >>Gnd: null
2014-03-04 1:37:50 PM >>RX: 10, TX: 14
2014-03-04 1:37:50 PM >>
2014-03-04 1:37:51 PM >>
2014-03-04 1:37:51 PM >>
2014-03-04 1:37:51 PM >>
2014-03-04 1:37:51 PM >>Connecting...
2014-03-04 1:37:51 PM >>Connecting...
2014-03-04 1:37:51 PM >>Hardware version:CA01
2014-03-04 1:37:51 PM >>Hardware version:CA01
2014-03-04 1:37:51 PM >>Software version:0001
2014-03-04 1:37:51 PM >>Software version:0001
2014-03-04 1:37:51 PM >>CPU TYPE:625A
2014-03-04 1:37:51 PM >>CPU TYPE:625A
2014-03-04 1:37:51 PM >>Internal version:8000
2014-03-04 1:37:51 PM >>Internal version:8000
2014-03-04 1:37:51 PM >>If it's a 625a phone, please select Boot V5.1232 manually and try again.
2014-03-04 1:37:51 PM >>If it's a 625a phone, please select Boot V5.1232 manually and try again.
2014-03-04 1:37:51 PM >>
2014-03-04 1:37:51 PM >>
2014-03-04 1:37:51 PM >>IF Software stop here.you see Stop(red) button become Run(Green) please press and hold power button till boot downloading not start,then release power button,when you releaes power button if boot downloading stop this mean you have HARDWARE fault in your mobile
2014-03-04 1:37:51 PM >>IF Software stop here.you see Stop(red) button become Run(Green) please press and hold power button till boot downloading not start,then release power button,when you releaes power button if boot downloading stop this mean you have HARDWARE fault in your mobile
2014-03-04 1:38:05 PM >>Detection initiated, connect the phone and power on it...
2014-03-04 1:38:13 PM >>Vcc: 12
2014-03-04 1:38:13 PM >>Gnd: null
2014-03-04 1:38:13 PM >>RX: 10, TX: 14
2014-03-04 1:38:13 PM >>
2014-03-04 1:38:14 PM >>
2014-03-04 1:38:14 PM >>
2014-03-04 1:38:14 PM >>
2014-03-04 1:38:14 PM >>Connecting...
2014-03-04 1:38:14 PM >>Connecting...
2014-03-04 1:38:14 PM >>Hardware version:CA01
2014-03-04 1:38:14 PM >>Hardware version:CA01
2014-03-04 1:38:14 PM >>Software version:0001
2014-03-04 1:38:14 PM >>Software version:0001
2014-03-04 1:38:14 PM >>CPU TYPE:625A
2014-03-04 1:38:14 PM >>CPU TYPE:625A
2014-03-04 1:38:14 PM >>Internal version:8000
2014-03-04 1:38:14 PM >>Internal version:8000
2014-03-04 1:38:14 PM >>If it's a 625a phone, please select Boot V5.1232 manually and try again.
2014-03-04 1:38:14 PM >>If it's a 625a phone, please select Boot V5.1232 manually and try again.
2014-03-04 1:38:14 PM >>
2014-03-04 1:38:14 PM >>
2014-03-04 1:38:14 PM >>IF Software stop here.you see Stop(red) button become Run(Green) please press and hold power button till boot downloading not start,then release power button,when you releaes power button if boot downloading stop this mean you have HARDWARE fault in your mobile
2014-03-04 1:38:14 PM >>IF Software stop here.you see Stop(red) button become Run(Green) please press and hold power button till boot downloading not start,then release power button,when you releaes power button if boot downloading stop this mean you have HARDWARE fault in your mobile
2014-03-04 1:38:27 PM >>Detection initiated, connect the phone and power on it...
2014-03-04 1:38:30 PM >>Vcc: 12
2014-03-04 1:38:30 PM >>Gnd: 20
2014-03-04 1:38:30 PM >>RX: 10, TX: 14
2014-03-04 1:38:30 PM >>
2014-03-04 1:38:31 PM >>
2014-03-04 1:38:31 PM >>
2014-03-04 1:38:31 PM >>
2014-03-04 1:38:32 PM >>Connecting...
2014-03-04 1:38:32 PM >>Connecting...
2014-03-04 1:38:32 PM >>Hardware version:CA01
2014-03-04 1:38:32 PM >>Hardware version:CA01
2014-03-04 1:38:32 PM >>Software version:0001
2014-03-04 1:38:32 PM >>Software version:0001
2014-03-04 1:38:32 PM >>CPU TYPE:625A
2014-03-04 1:38:32 PM >>CPU TYPE:625A
2014-03-04 1:38:32 PM >>Internal version:8000
2014-03-04 1:38:32 PM >>Internal version:8000
2014-03-04 1:38:32 PM >>If it's a 625a phone, please select Boot V5.1232 manually and try again.
2014-03-04 1:38:32 PM >>If it's a 625a phone, please select Boot V5.1232 manually and try again.
2014-03-04 1:38:32 PM >>
2014-03-04 1:38:32 PM >>
2014-03-04 1:38:32 PM >>IF Software stop here.you see Stop(red) button become Run(Green) please press and hold power button till boot downloading not start,then release power button,when you releaes power button if boot downloading stop this mean you have HARDWARE fault in your mobile
2014-03-04 1:38:32 PM >>IF Software stop here.you see Stop(red) button become Run(Green) please press and hold power button till boot downloading not start,then release power button,when you releaes power button if boot downloading stop this mean you have HARDWARE fault in your mobile
2014-03-04 1:38:34 PM >>Detection initiated, connect the phone and power on it...
2014-03-04 1:38:38 PM >>Vcc: 12
2014-03-04 1:38:38 PM >>Gnd: 20
2014-03-04 1:38:38 PM >>RX: 10, TX: 14
2014-03-04 1:38:38 PM >>
2014-03-04 1:38:38 PM >>
2014-03-04 1:38:38 PM >>
2014-03-04 1:38:38 PM >>
2014-03-04 1:38:38 PM >>
2014-03-04 1:38:38 PM >>