samsung mobile upgrade step by step

[Mohuas]

Samsung T210 Galaxy Tab Firmware Update Steps:

- Check that your device battery has at least 90% of charging level.​

- Turn off your device.​

- Run Odin.exe program.​

- Check these options: Auto Reboot, F.Reset Time​

- In case you have full firmware package with PIT file included then check Re.Partition option too.​

- Click on PIT button and select *.pit file​

- Now you should select the firmware files in the following order:

Bootloader: BOOTLOADER_T210xxxxxx_....tar.md5
PDA: CODE_T210xxxxxx_....tar.md5
CSC: CSC_Oxx_T210Oxxxxxxx_....tar.md5

- To put your Galaxy Tab 3 7.0 into Download Mode follow these steps:​

Press and Hold Volume Down key + Power key for 5 seconds, And when you see the warning message release them both.​

- Press Volume Up key to enter the download mode.​

- Connect the device to your computer using the USB cable.​

- Wait until Windows detects the phone and installs its USB drivers.​

- When your device is correctly detected then you will see its COM port number at Odin's window 0:[COMxx]​

- At this step you are ready to begin the update, Just click on Start button.​

- Odin will do the work for you, So wait for it.​

- After finishing the update process the device will be rebooted.​

- Disconnect the USB cable from your device.​

- Look at Odin's window and you should see PASS!


firmware


Android 4.1.2:
​

- T210XXAMEQ / ODDAME6 India​

- T210XXAMES / OJVAME6 XSG United Arab Emirates​

- T210XXAMES / OJVAME6 XFA South Africa​

- T210XXAMEU / OJVAME7 TUR Turkey



flasher::Odin307 - Download - 4shared

 

[Mohuas]

Samsung R970 GS4 Firmware Update Instructions:

- Turn your phone off.

- Take out its SIM-card and memory card if there are any.​

- From Odin flasher folder run Odin.exe program.​

- Check the following options: Auto Reboot, F.Reset Time​

- Click on PDA button to select the following file from extracted firmware folder:

R970VXUAMDL_R970USCAMDL_R970VXUAMDL_HOME.tar.md5​

- Because we use one file update package then no need for any PIT file, And no need to check Re.Partition option too.​

- Put your Samsung R970 GS4 into Download Mode:

Press and hold Volume Down key + Home key, Then press Power key, When you see the warning message on screen release all keys and press Volume Up key to be into Download Mode.

- Plug the USB cable into your phone and computer too.​

- Wait until Windows detects the phone and installs the needed drivers for it.​

- Look at Odin program to check if your phone's COM port number is detected 0:[COMxx].​

- Now you are ready for the update, Just click on Start button.​

- Odin will install the new firmware files into your Samsung R970 GS4.​

- When the job is done your device will be rebooted.


firmware


Android 4.2.2:​

- R970VXUAMDL / USCAMDL U.S. Cellular



flasher::Odin307 - Download - 4shared​

 

[Mohuas]

Samsung M919 GS4 Firmware Update Steps:

- Turn off your Samsung M919 GS4.​

- Take out the SIM-card, And memory card in case it has one inside.​

- Run Odin.exe program.​

- Check the following options: Auto Reboot, F.Reset Time​

- Click on PDA button at Odin's window.​

- From the extracted firmware package select this file:

M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5

- To put your M919 GS4 into Download Mode press and hold Volume Down key + Home key, Then press Power button until you see the warning message on its screen, Then release all keys and press Volume Up key to be into Download Mode.​

- Use the original USB cable to connect your Samsung M919 GS4 to the computer.​

- Wait until Windows detects the phone and installs the needed drivers for it.​

- When Odin program detects your phone you can see the COM port number of it 0:[COMxx]​

- Now you are ready for the update, Just click on Start button.​

- Odin program will do the job for you, So give it some minutes.​

- Your Samsung M919 GS4 will be rebooted after installing the new firmware files into it.​

- In case the update was done successfully then you will see PASS!


firmware


Android 4.2.2:​

- M919UVUAMDL / TMBAMDL USA T-Mobile



flasher::Odin307 - Download - 4shared

 

[Mohuas]

Samsung SGH-T679 Exhibit II 4G Firmware Update Steps:

- Make sure that your phone has at least 90% of charging level.​

- Turn it off.​

- Take out its SIM-card and memory card in case it has one.​

- Run Odin.exe program.​

- Check only: Auto Reboot + F.Reset Time​

- Click on PDA button to select the firmware update file from its extracted folder:

​

T679UVLK2_T679UVLK2_T679UVLK2_HOME.tar.md5

​

- Put your Samsung T679 into Download Mode (Press hold Volume Down key, Then press Power button).​

- Plug the USB cable into your phone and PC.​

- Wait until Windows installs any needed drivers for your Samsung T679.​

- Odin program will detect the COM port number of your phone 0:[COMxx]​

- Click on Start button and Odin flasher will install the new firmware files into your device.​

- After finishing the update process Odin program will reboot your Samsung T679.​

- To make sure if the update was successful or not, Look at Odin's window and you will see PASS!
firmware


Android 2.3.6:​

- T679UVLK2 / TMBLK2 USA T-Mobile




flasher::S5360_Downloader - Download - 4shared​