Mohuas

Product Supporter
Joined
Mar 6, 2013
Posts
973
Likes
15
Samsung GT-I9152 Galaxy Mega 5.8 Duos Firmware Update Steps:


- Charge your device battery to be at least at 90% of charging level.
- Turn off the device.
- Take out the SIM and Memory cards.
- Run Odin.exe program.
- Check these options: Re-Partition (If you have PIT file only), Auto Reboot, F.Reset Time.
- Click PIT button to select: crater.pit
- Now you have to select the firmware files from the extracted firmware folder:

Click Bootloader button to select: BOOT_I9152xxxxxx_REV03A.tar.md5
Click PDA button to select: CODE_I9152xxxxxx_..._REV03A_user_low_ship.tar.md5
Click Phone button to select: MODEM_I9152xxxxxx_REV03A.tar.md5
Click CSC button to select: CSC_Oxx_I9152Oxxxxxx_..._REV00_user_low_ship.tar.m d5

- Put your Samsung GT-I9152 Galaxy Mega 5.8 Duos into Download Mode:

Press and Hold Volume Down key + Home key + Power, After you get the warning message release all keys and press Volume Up key.

- Connect the phone to computer using the USB cable.
- Wait until Windows detects the device and install its drivers.
- If Odin detects the connected device correctly you will see its COM port number (0:[COMxx]).
- Click on Start button.
- Odin will start to update your phone using the selected firmware files one by one.
- The phone will be rebooted after completing the update.
- If the update was successful you will see PASS!



Samsung I9152 Firmwares:


Android 4.2.2:
- I9152XWUAMF2 / OJVAMF1 LYS United Arab Emirates
- I9152XWUAMF2 / OJVAMF1 XSG United Arab Emirates
- I9152XXUAME9 / OJVAME4 XSG United Arab Emirates
- I9152XXUAMEC / OXEAMEC SER Russia
- I9152XXUAMEE / OXEAMEC SER Russia
- I9152XXUAMEE / OXEAMEC SEK Ukraine Kyivstar
- I9152XXUAMEF / OXEAMEC SEK Ukraine Kyivstar
 

Mohuas

Product Supporter
Joined
Mar 6, 2013
Posts
973
Likes
15
Samsung SGH-I337 Galaxy S4 Firmware Update Steps:


- Extract the downloaded firmware package and Odin flasher.
- Install the USB drivers, Then restart your computer.
- Turn off your Samsung SGH-I337 and take out its SIM and Memory cards.
- Run Odin.exe program.
- Make sure that only Auto Reboot, F.Reset Time options are checked.
- Click PDA button and select the firmware file from the extracted firmware folder:

I337xxxxxx_I337ATTxxxx_I337xxxxxx_HOME.tar.md5

- Put your device into Download Mode:

Press and Hold Volume Down key + Home + Power, Then when you see the warning message release all keys, Now press the Volume Up key to be into the Download Mode.

- Plug the USB cable into your device and connect it to your computer.
- Windows will detect the phone and start installing its USB drivers, Wait until it is done.
- When Odin detects your connected device you will see its COM port number 0:[COMxx]
- Now you are ready to update the phone, Just click on Start button.
- Odin flasher will install the new firmware into your connected device, And reboot it after that.
- When you see the word PASS!


firmware here


Android 4.2.2:

 

Mohuas

Product Supporter
Joined
Mar 6, 2013
Posts
973
Likes
15
Samsung N5110 Galaxy Note Firmware Update Steps:

- Turn off the phone.
- Run Odin.exe program.
- Check these options: Re-Partition (If you have PIT file only), Auto Reboot, F.Reset Time.
- Click PIT button to select: kona_wifi.pit
- From the extracted firmware package you have to select the files in the following order:

Click Bootloader button to select: BOOTLOADER_N5110xxxxxx_REV00_...noship.tar.md5
Click PDA button to select: CODE_N5110xxxxxx_..._REV00_user_low_noship.tar.md5
Click CSC button to select: CSC_Oxx_N5110Oxxxxxx_....._user_low_noship.tar.md5

- Put your Samsung N5110 into Download Mode:

Press and Hold Volume Down key + Power key for 5 seconds, And after you see the warning message release both keys and press Volume Up key to be into Download Mode.

- Use the USB cable to connect your mobile to Computer.
- Wait until Windows detects the phone and installs the needed drivers for it.
- If Odin detects the connected device correctly you will see its COM port number (0:[COMxx]).
- Click on Start button.
- Odin will start to update your phone using the selected firmware files.
- The phone will be rebooted after the update.
- If the update was successful you will see PASS!


firmware



Android 4.1.2:
- N5110UEBMC8 / XARBMC8 Cellular south
- N5110UEDMD1 / XARDMD1 Cellular south
- N5110UEEMF1 / XAREMF1 Cellular south
- N5110XXBMC9 / OJVBMC8 TUR Turkey
- N5110XXBMC9 / OJVBMC8 XSG United Arab Emirates
- N5110XXBMC9 / OXEBMC6 SER Russia
- N5110XXBMC9 / OXXBMC5 DBT Germany
- N5110XXBMC9 / OXXBMC5 NEE Nordic
- N5110XXBMC9 / OXXBMC5 PHE Spain
- N5110XXBMC9 / OXXBMC5 SEB Baltic
- N5110XXBMC9 / OXXBMC5 XEF France
- N5110XXBMC9 / PHNBMC3 Netherlands
- N5110XXBMC9 / OJVBMC8 XFA South Africa
- N5110XXBMCA / AUTBMC3 Switzerland
- N5110XXBMCA / LUXBMC4 Luxembourg
- N5110XXBMCA / OXXBMC5 COA Romania Cosmote
- N5110XXBMCA / OXXBMC5 EUR Greece
- N5110XXBMCA / OXXBMC5 SEE South East Europe
- N5110XXBMCA / OXXBMC5 SIO Slovenia
- N5110XXBMCA / OXXBMC5 TPH Portugal
- N5110XXBMCA / OXXBMC5 XEO Poland
- N5110XXBMCA / OXXBMC6 XEH Hungary
- N5110XXBMD1 / OXXBMD1 XEO Poland
Android 4.2.2:
 

Mohuas

Product Supporter
Joined
Mar 6, 2013
Posts
973
Likes
15
Samsung S7710 Galaxy Xcover 2 Firmware Update Stpes:

- Turn off the phone and take out any SIM card or memory card.
- Run Odin.exe program.
- Check these options: Re-Partition, Auto Reboot, F.Reset Time.
- Click PIT button and select: skomerxx_121217.pit
- If you have a complete firmware package of Samsung S7710 then you will see 2 files inside (PDA + CSC):

Click PDA button and select: CODE_S7710xxxxxx_..._REV00_user_low_ship.tar.md5
Click CSC button and select: CSC_Oxx_S7710Oxxxxxx_..._REV00_user_low_ship.tar.m d5

- Put your Samsung S7710 into Download Mode:

Press and Hold Volume Down key + Home key + Power key

- Use the USB cable to connect the device to your Computer.
- Wait for a while until Windows detects the device and installs its drivers.
- Look at Odin's window and if you see the COM port number of the connected device (0:[COMxx]) then everything is ok.
- Click Start button, And Odin will install the new firmware files into your device.
- During the update process do not try to disconnect the USB cable or stop the operation for any reason.
- After the update is done your phone will reboot.
- If you see PASS!


firmware



Android 4.1.2:
- S7710XXAMB3 / OXXAMA9 NEE Nordic
- S7710XXAMB5 / AUTAMA1 Switzerland
- S7710XXAMB5 / OXXAMB2 NEE Netherlands
- S7710XXAMB5 / OXFAMB2 SIO Slovenia
- S7710XXAMB5 / OXXAMB3 PHE Spain
- S7710XXAMB5 / TENAMB1 Norway Telenor
- S7710XXAMB5 / HTSAMB2 Sweden Tre
- S7710XXAMB5 / MOTAMA1 Slovenia Mobitel
- S7710XXAMB5 / OXFAMB1 BGL Bulgaria
- S7710XXAMB5 / OXFAMB1 COA Romania Cosmote
- S7710XXAMB5 / OXFAMB2 SEB Baltic
- S7710XXAMB5 / OXFAMB2 SIM Slovenia Si.mobil
- S7710XXAMB5 / OXXAMB2 ORX Slovakia
- S7710XXAMB5 / OXXAMB2 XEO Poland
- S7710XXAMB5 / PHNAMB1 Netherlands
- S7710XXAMB5 / VNZAMB1 New Zealand Vodafone
- S7710XXAMB6 / OXEAMB3 SER Russia
- S7710XXAMB6 / OXEAMB3 Russia complete
- S7710XXAMB6 / OXEAMC1 SEK Ukraine Kyivstar
- S7710XXAMB6 / OXXAMB2 NEE Nordic
- S7710XXAMC1 / LUXAMC3 Luxembourg
- S7710XXAMC1 / MOBAMC1 Austria A1
- S7710XXAMC1 / PLSAMC1 Poland PLUS
- S7710XXAMC3 / OXXAMC5 TPH Portugal
- S7710XXAMC3 / TIMAMC1 Italy TIM
- S7710XXAMC3 / XSAAMB1 Australia
- S7710XXAMC3 / OXXAMC5 XEF France
- S7710XXAMC3 / VD2AMD1 Germany Vodafone
- S7710XXAMD2 / PLSAMD2 Poland PLUS
- S7710XXAME1 / PRTAME1 Poland Play
 
Top