plz add Spd New CPU 6800H3

Connection successful,connected state!
Version: V3.8
SN:048-477-973
Port:COM3
After format or Flash you have to press & hold power button for at least 1.30 mins.
For many phones, charge pins need to be set in order to identify USB devices.
Detecting D+ and D-...
Vcc: 7
Gnd: 2
Detection initiated...
D+ = 6, D- = 8
Detection D+/D- with 1.59 seconds.
Continue to detect BOOT pin...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
BOOT(Pull Down) = 5
Detection completed.
Setting pinouts...
Find USB device:SCI USB2Serial (COM4), (VID_1782&PID_4D00)
Pinout setting complete.
Available Ports:COM1 COM2 COM3 COM4
Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
CPU TYPE:[68030000]
Flash ID: 00C800A1
FLASH LEN:0x8000000
>>Please change Boot or reduce Baudrate, try it again.
Connection successful,connected state!
Version: V3.8
SN:048-477-973
Port:COM3
After format or Flash you have to press & hold power button for at least 1.30 mins.
For many phones, charge pins need to be set in order to identify USB devices.
Detecting D+ and D-...
Vcc: 7
Gnd: 2
Detection initiated...
D+ = 6, D- = 8
Detection D+/D- with 1.59 seconds.
Continue to detect BOOT pin...
Found [SPD] USB device: SCI USB2Serial,(VID_1782&PID_4D00)
BOOT(Pull Down) = 5
Detection completed.
Setting pinouts...
Find USB device:SCI USB2Serial (COM4), (VID_1782&PID_4D00)
Pinout setting complete.
Available Ports:COM1 COM2 COM3 COM4
Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
CPU TYPE:[68030000]
Flash ID: 00C800A1
FLASH LEN:0x8000000
>>Please change Boot or reduce Baudrate, try it again.