GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

G'Five U808 Format done Initializing...
DA_LIB_VER_3.2.2.8
It is sensing the pinout fast,please hold on the phone Power key
RXD=5 TXD=4
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: B017.COMP_T3T4.GFIVE.FAT.20
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

MODEL PHONE: BEST V8
CPU:MSTAR
PHONE STATUT: PHONE LOCK
ETAT: READ CODE DONE!!!



Chip=MStar
Action=ReadFlash
FlashType=NOR
boot=MSW8535x/8533
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=C:\Documents and Settings\BRYAN\Mes documents\best v8 mstar cpu
Comport=COM315
Baudrate=921600
CPU_Type=MSW85xx
CPU_ID=0012
NOR_ID=00EC240200000000
NOR_Size=16MB
NOR_Name=SAMSUNG_K5L2833
NOR_DieCnt=0
NAND_ID=N/A
NAND_Size=N/A
NAND_Name=NAND: N/A
Initializing...
DA_LIB_VER_3.2.2.7
It is sensing the pinout fast,please hold on the phone Power key
D-=8 D+=6
Detecting USB device...
USB mass storage device found[ F:]
Loading bootloader...
Done.
Reading H/W Info...
RamSize=0x00400000
BB: MSW85xx Flash: SAMSUNG_K5L2833
 Read information has been completed.
Reading Flash...
Saved file to:
C:\Documents and Settings\BRYAN\Mes documents\best v8 mstar cpu
All Done.
+++++++++++++++++++End at: 5/23/2011 7:24:27 PM+++++++++++++++++++
-------------------Created: 5/23/2011 7:24:32 PM-------------------
Chip=MStar
Action=Unlock
FlashType=NOR
boot=MSW8535x/8533
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=C:\Documents and Settings\BRYAN\Mes documents\best v8 mstar cpu
Comport=COM315
Baudrate=921600
Initializing...
DA_LIB_VER_3.2.2.7
Searching SecCode from file...
Security Code=00000000
Security Code=0000
Security Code=6839
Security Code=55666
All Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

e71 format

Initializing...
DA_LIB_VER_3.2.2.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=22 TXD=23
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A03, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098004900000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: MAUI.GEMINI.W08.12.F2
Changing baudrate to 115200...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Initializing...
DA_LIB_VER_3.2.2.7
It is sensing the pinout fast...
D-=17 D+=19
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM6
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700900005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 115200 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L7 Flash: NOR_ST_M58WR064KT
setting the Flash Parameters...
Settings have been completed!
Connect and search Security Code...
PhoneLock: 8888
PhoneLock: 430
Privacy protect: 1234
PhoneLock: 38926
Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

lock code


Initializing...
DA_LIB_VER_3.2.2.7
It is sensing the pinout fast...
D-=17 D+=19
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM6
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700900005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 115200 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L7 Flash: NOR_ST_M58WR064KT
setting the Flash Parameters...
Settings have been completed!
Connect and search Security Code...
PhoneLock: 8888
PhoneLock: 430
Privacy protect: 1234
PhoneLock: 38926
Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Initializing...
DA_LIB_VER_3.2.2.7
It is sensing the pinout fast...
D-=6 D+=5
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM324
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_ST_M58WR064KT
setting the Flash Parameters...
Settings have been completed!
Connect and search Security Code...
Privacy protect: 33
Theft proof: 258013
PhoneLock: 2580
Privacy protect: 2891
PhoneLock: 063
Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

G right G10 format done

Initializing...
DA_LIB_VER_3.2.2.7
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM9
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_TV00560002EDGB
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x007B0000, Size=0x00040000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

e72 success flash


Initializing...
DA_LIB_VER_3.2.2.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=2
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A03, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC257E25082501
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: MAUI.GEMINI.W08.12.F2
Changing baudrate to 115200...
Done.
Analyzing the UID-Encryption info, Some file may need a long time...
Decryption complete. Key[B234DBFC126AEC64]-B9
Downloading Flash file...
All Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

lawow f 800 spd power passward unlock done model=lawow f 800 spd
prob =power on passward


201083112447728_0.jpg


Initializing...
DA_LIB_VER_3.2.2.8
It is sensing the pinout fast...
D-=23 D+=22
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM16
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Manufacturer: Macronix, Device: Unknow
CPU: SC6600L2 Flash: NOR_UNKNOWN
setting the Flash Parameters...
Settings have been completed!
CPU: SC6600L2 Flash: User-defined
Connect and search Security Code...
PhoneLock: 0553
PhoneLock: 0554
PhoneLock: 0531
PhoneLock: 0911
PhoneLock: 0891
Privacy protect: 1122
PhoneLock: 32108
PhoneLock: 472
PhoneLock: 126
PhoneLock: 132
PhoneLock: 711
PhoneLock: 474
PhoneLock: 719
Theft proof: 123085
Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

ZHT 5130 flash done

Initializing...
DA_LIB_VER_3.2.2.7
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM9
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_S29GL064A_T
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Programming...
Compare Image: Enable
All Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

F800 go off after power on solved

Initializing...
DA_LIB_VER_3.2.2.7
It is sensing the pinout fast...
D-=23 D+=22
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM9
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700900005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L7 Flash: NOR_TV00560002EDGB
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x007A0000, Size=0x00050000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

X600 imei repair done

Initializing...
DA_LIB_VER_3.2.2.7
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=9 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
IMEI=025080920000158
IMEI=025080920000158
Rebulid IMEI1=353056941620796
Rebulid IMEI2=353056758126754
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

G five F5 format done

Initializing...
DA_LIB_VER_3.2.2.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=8
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 002088BA00000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: KBAM7026DGF_EABU_32M_TL_2.02.B11
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00380000, size=0x00080000
All Done

IMEI REPAIR

Initializing...
DA_LIB_VER_3.2.2.7
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=22 TXD=17
Connecting...Please hold on the POWER key until the red gauge is going...
Connecting, Please turn on the phone...
Connected! Checking IMEI...
Original IMEI 1= +EGMR: ""

OK
IMEI 1 rebuild has been implemented: 353056419246895
Original IMEI 2= +EGMR: ""

OK
IMEI 2 rebuild has been implemented: 353056847568797
Need to restart the phone to verify new imei.
 
J

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
2 20 10 5 1
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

1661 phone lock done

cable: P-04A

Initializing...
DA_LIB_VER_3.2.2.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=23 TXD=22
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6219, HardwareVer:8A01, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 0001227E22022201
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID:
Changing baudrate to 115200...
Done.
Formatting Flash...
AutoFormat address: start=0x00700000, size=0x00100000
All Done
 
You must log in or register to reply here.
Prev Thread | Next Thread
Top