Any Flash File (MTK-Spd-Mstar) Request Here By Dipankor-ctg

answer: Any Flash File (MTK-Spd-Mstar) Request Here By Dipankor-ctg

Z101.HX.K7-XPTEL.V1.0-0826
xptel k7 6252 flash and cnv neede

boss
 
answer: Any Flash File (MTK-Spd-Mstar) Request Here By Dipankor-ctg

thankssssssssssssss good job
 
answer: Any Flash File (MTK-Spd-Mstar) Request Here By Dipankor-ctg

plz send me Gfive G365s mtk 6253 flash file witn cnv file plzzzzz send me
 
answer: Any Flash File (MTK-Spd-Mstar) Request Here By Dipankor-ctg

MAUI.10A.W11.08.MP.V4.F4

MBD M13


thanks in addvance

br:
WHOSANE
 
dhar81 said:
need flash file Q900
V1.0_5222_YNF_Q10_4YYnMyYT

thanks and advance
Click to expand...

if you need flash file i tell all member many time post info log
cpu name
flash size
flash id
model name or company name
 
maxx-mx-466-mobile-phone-medium-1.jpg

mobile brand maxx 466
hardware ver 8A05
cpu 6225
pls upload thi mobile pls flash file

thank you
 
dear
I am very wrong in this problem which i formatted this mobile without read flash for it.so that the mobile switched off.A customer is very wrong.
The time closed by customer until Thursday.
Please i want original flash file for this mobile vastly.
The pictures for this mobile are uploaded on my email down:
((((((
9))))))
 
dear
I am very wrong in this problem which i formatted this mobile without read flash for it.so that the mobile switched off.A customer is very wrong.
The time closed by customer until Thursday.
Please i want original flash file for this mobile vastly.
The pictures for this mobile are uploaded on my email down:
((((((
))))))

After formatting:
Initializing...
DA_LIB_VER_4.3.6.8
It is sensing the pinout fast,please hold on the phone Power key
RXD=19 TXD=18
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6252, HardwareVer:8B00, SoftwareVer:CB02
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00C2002500370000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI(Nor Flash only)...
H/W detection ok.
Get Project ID from phone...
ProjectID Not Found.
 
neshwanalamery said:
dear
I am very wrong in this problem which i formatted this mobile without read flash for it.so that the mobile switched off.A customer is very wrong.
The time closed by customer until Thursday.
Please i want original flash file for this mobile vastly.
The pictures for this mobile are uploaded on my email down:
((((((
http://us-mg6.mail.yahoo.com/neo/)
Click to expand...

post screen shot and full info your mobile
model name
cpu
flash size
flash id
 
You must log in or register to reply here.
Prev Thread | Next Thread
Back
Top