use this cable, no need press any boot key in any spd phone
insert this usb cable(switch off with battery) and see in device manager,your mobile is connected
1-VCC
2-D-
3-D+
4- EMPTY IN CA101 NOKIA USB CABLE
5 GND
JOINT GND TO EMPTY POINT OR TWO WIRE SOLDERING, IF YOU JOINT BOTH WIRE YOUR CABLE IS MODIFIDE CABLE,IF DISSCONNECTED YOUR CABLE IS NORMAL CA101 CABLE
joint this empty point to gnd in ca 101 nokia usb cable
how to use the cable for read write flash or write imei
read write flash
1- open volcano
2-select spd tab and coreect boot acording to your phone cpu 6600,6610,6800,6820,6530
3-tick any option read,write,format
4-untick auto detact pinout
5-insert this usb cable
6-see in device manager com port
7 -com port automaticly refresh in volcano software(if not refresh automaticly please refresh or select manuly)
8-run
insert this usb cable(switch off with battery) and see in device manager,your mobile is connected
1-VCC
2-D-
3-D+
4- EMPTY IN CA101 NOKIA USB CABLE
5 GND
JOINT GND TO EMPTY POINT OR TWO WIRE SOLDERING, IF YOU JOINT BOTH WIRE YOUR CABLE IS MODIFIDE CABLE,IF DISSCONNECTED YOUR CABLE IS NORMAL CA101 CABLE
joint this empty point to gnd in ca 101 nokia usb cable
how to use the cable for read write flash or write imei
read write flash
1- open volcano
2-select spd tab and coreect boot acording to your phone cpu 6600,6610,6800,6820,6530
3-tick any option read,write,format
4-untick auto detact pinout
5-insert this usb cable
6-see in device manager com port
7 -com port automaticly refresh in volcano software(if not refresh automaticly please refresh or select manuly)
8-run