Musakatari

Well-known Member
Joined
Nov 9, 2010
Posts
1,460
Likes
15
what it means to check the first and last pin on MT-BOX

what it means to check the first and last pin on MT-BOX​


The most common causes of lack of communication with the Nokia BB5 is damaged UTP connector which consists of 10 pins.
Frequently by inserting cables 8-pins or other non-10-pins. (pic.1)

19112003.gif

If your phone doesn't communicate with the program and isn't damaged or loaders are in the wrong folder or internal cable fault (resistance on BSI line), then we say that you need to check first and last pin - in this FAQ I will show you a quick demonstration how to change a new one. (pic.2)

93990637.gif


WARNING! If you take yourself to exchange the item will automatically lose the guarantee on the unit
- remember you need to know basic soldering guide (pic.3)

16850102.gif

After sucessfully removing old UTP slot (pic.3) clean carefully soldering field (pic.4)

66426429.gif

When you insert a new connector then can enjoy the action of your MT-Box device

51143636.gif

Good Luck !
 

Musakatari

Well-known Member
Joined
Nov 9, 2010
Posts
1,460
Likes
15
MT box - Open way, Electrical scheme and PCB pictures

Maybe this will help if someone break some tracks or need to repair their box.

MT-Box_down.jpg



MT-Box_up.jpg



MT-Box_open_way.jpg


MT Box electrical scheme: download form HERE
 
Top