**Tested Pinout & dumps file**

J

josher

Well-known Member
Joined
Sep 5, 2010
Posts
6,745
Likes
176
bl20 pinouts for JTAG.
Pls post a full dump or boot dump for RIFF or Medusa
Thx
lgbl20jtag.jpg
 
J

josher

Well-known Member
Joined
Sep 5, 2010
Posts
6,745
Likes
176
Spice C-3300 Jtag Pinouts & Dump


spicec3300.jpg

​



Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.30, JTAG Manager Version: 1.40
Selected Resurrector: [QSC1100 X14 NOR V1.0.0.0]

Connecting to the dead body...OK
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
Model selected: QUALCOMM - QSC1100 X14 NOR

Detected dead body ID: 0x122CE0E1



Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.30, JTAG Manager Version: 1.40
Selected Resurrector: [QSC1100 X14 NOR V1.0.0.0]

Halting target...OK
STATUS: Target is halted.

R0 = 0x0001077D R6 = 0x00000000 R12 = 0x0002AFF9
R1 = 0x00001C15 R7 = 0x082ED89C R13 = 0x0828EB8C
R2 = 0x00001C15 R8 = 0x00000000 R14 = 0x00297E2F
R3 = 0x80002000 R9 = 0x00000000 R15 = 0x00423882
R4 = 0x00000003 R10 = 0x0828DFE8 CPSR = 0x20000033
R5 = 0x00000001 R11 = 0x00000000




Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x000001000000400000

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x2254 (8MB)

Reading FLASH1 address space from 0x000000000000 to 0x0000007FFFFF
Completed in 00:00:52.969 (Average Transfer Rate: 154.66 kB/s)



Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.30, JTAG Manager Version: 1.40
Selected Resurrector: [QSC1100 X14 NOR V1.0.0.0]

Connecting to the dead body...OK
Detected dead body ID: 0x122CE0E1 - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x000001000000800000

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x2254 (8MB)

Writting FLASH1 memory from 0x000000000000 to 0x0000007FFFFF
Completed in 00:02:31.563 (Average Transfer Rate: 54.05 kB/s)



DUMP
 
You must log in or register to reply here.
Prev Thread | Next Thread
Back
Top