SPD, MSTAR & MTK IMEI Write 100000% Solution With Volcano (if u face any problem contact me)
1. SPD CPU (Including 6530 & 6800H)
Open Volcano Exe
Go to Detect tab
Select [D+/D-] SPD/Anyka
Atached Phone
Click on Detect
After Detection click on Reset Pinouts (Keep in mind where it was detected D+, D- & GND)
Go to Detect tab
Select [D+/D-] SPD/Anyka
Atached Phone
Click on Detect
After Detection click on Reset Pinouts (Keep in mind where it was detected D+, D- & GND)
Now set manual pinouts GND & USBD+ & USBD- (Where it's detected before)
Click on Set Pinout button
Now Go to Spd Tab
Press these keys from your keyboard to enable Imei repair Function ALT + CTRL + i
Untick auto-detect Pinout
R/W IMEI chooses COM
Click on Write IMEI
click RUN
New windows will be open
Select Usb as COM (don't select any comport select USB only)
Write IMEI into Box
Press these keys from your keyboard to enable Imei repair Function ALT + CTRL + i
Untick auto-detect Pinout
R/W IMEI chooses COM
Click on Write IMEI
click RUN
New windows will be open
Select Usb as COM (don't select any comport select USB only)
Write IMEI into Box
Now disconnect Main Cable from Box side don't disconnect from phone side See Below Carefully
Now Click On "WriteIMEI(W)"
After click on Write IMEI Now Connect Main Cable to Box & just leave it don't do anything
After few seconds you can see IMEI Write OK.
You have to do exactly as i described you will get success without any error
Br,
azam
..::Nokian Care®::..
azam
..::Nokian Care®::..