Solution for Sharp 903sh please wait

[mamun_iqbal2000]

Model: Sharp 903sh

Problem: Please wait... then shut off

Action taken: flash with different flash files like; euro, jap, tw files but no good until the phone won't power on. And i'm looking for solution and i found this flash files which given by Boss Vino.

903sh FLASHFILES Credit goes to Boss Vino

Thanks for the flash file boss....

Note: You can use this files in SETool and USB-Smart

Here is the Logs in flashing

0.914027/UNI
CARD SERIAL: arniel
Loaded 51 flash descriptors
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:24
Speed:921600
DB2000 only supports 460800,fallback.
OTP LOCKED:1 CID:24 PAF:0 IMEI:354721luchniel CERT:BROWN
LDR:040622 1339 LLECXC1325712_PRODUCTION P2J
Flash ID check:B00B
Flash props sent ok
Switching to USB...
interface not changed
writing D:\Downloads\SHARP Flash files\903sh\SH903_v1046_EURO_2006_Unlocked\SH903_v1046_EURO_2006_Unlocked_Part1.ssw
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:528
Will flash 528 blocks...
SSW loading returns:0
writing D:\Downloads\SHARP Flash files\903sh\SH903_v1046_EURO_2006_Unlocked\SH903_v1046_EURO_2006_Unlocked_Part2.ssw
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:232
Will flash 232 blocks...
SSW loading returns:0
writing D:\Downloads\SHARP Flash files\903sh\SH903_v1046_EURO_2006_Unlocked\SH903_v1046_EURO_2006_Unlocked_Part3.ssw
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:2
Will flash 2 blocks...
SSW loading returns:0
Elapsed: 1270 secs.

After flashing, do booting initialization by pressing #+power button, wait until it finished...

You have now the working phone....

screen shot

 

[greg]

sir ihave this 903sh fon.it wont turn on.i need to flash this fon

 

[greg]

where can i get this flash file for 903sh

 

[Pathar]

Already posted but i am again post here

903sh Download Credit goes to Boss Vino