Solution 5130c Contact service (Simlock and security)

[Musakatari]

Solution 5130c Contact service (Simlock and security)
5130c RM 495, is mobile nokia BB5 SL3 category ...
and because it was so many people say that the phone is not support for the process simlock unlock and repair ... and repairs ervice Contacts ....
Really so .........................???

Well .... before we parse the facts, there is an important question .... what SL3 or Security Level 3?
Should we understand from the beginning ..... SL1, SL2, SL3 ..........

A lot of information circulating on various forums and each one is slightly different,
but more or less following the division by which I understand and believe:
SL1 (Security Level 1) = Nokia BB5 early generations who do not have a 120 area PM
SL2 (Security Level 2) = Nokia BB5 that have areas of PM120 and simlock area contains data that are connected with the PM308
SL3 (Security Level 3) = Nokia BB5 that have areas of PM 120, PM308 and protected areas

........................... Previously, if less please ditambahin, if more please dikurangin, if wrong please correct ....... ......................

Based on the distribution of the above, what can and what can not be performed on each type of mobile phone?
SL1
Flashing = could do
Write PM 1 and PM 309 = can be done (using the SX4, reset the NPC, Bypass CRT)
Write PM all areas of = can be done
Write RPL = Can be done
Unlock = could do
SL2
Flashing = Can be done
Write PM 1 and PM309 = Can be done (using the SX4, reset the NPC, Bypass CRT)
Write PM all areas = Can be done
Write RPL = Can be done
Unlock = Can be done

SL3
Flashing = Can be done
Write PM 1 and PM309 = can be done (using the SX4, reset the NPC, Bypass CRT)
Write PM area 308 = Can not be done
Write RPL = Can be done
Unlock = not possible

NB: the SX4 with a way to bypass Certificate results are sometimes not perfect ... therefore the recommended for use SX4 Auth via server ...

5130c (RM 495) = Nokia BB5 SL3, if I could fix the case of contact service on this Hape?

Maybe we should just need to understand how the case contact the service can happen ....

In essence, when the phone is turned on, the cpu will do some tests (selftest), if there is one outcome that fail selftest / fail, the message "contact service" will appear on the screen.
Well, generally, files that occurred due to the failure selftest on test security and test simlock ...........
Security Test relates to the value of PM 1 and PM 309, if the value in both areas there is an invalid ... the results of selftest in the security test will be failed / failing. The result is "contact service".
Solution: re-write area of PM 1 and PM 309 with a valid value

Simlock test associated with the PM 120 and PM 308, if the value in both areas there tesebut invalid, then the results of selftest in Simlock test will be failed / failing. The result is "contact service".
Solution:
1. If the PM 120 is problematic, if you have a valid backup, could try to re-write the area. If not, make your own PM 120 section 0 using a variety of free tools that exist, and then try to re-write the area ...
2. If the PM 308 is problematic, it seems there is currently no tool that is able to fix it, because the PM 308 protected areas, can not be write-back (some say could ... with a little trick)

What I believe, that the PM 308 small areas might corrupt, because the area is protected ... so if a problem contact service for simlock test failed, it's likely because the area of AM 120 is corrupt, not the area of AM 308.
Examples PM 120 log because the corrupt ...
Log by JAF
Default SN type:
IMEI plain: 354223031265333
IMEI spare to net: 3A 45 22 03 13 62 35 03
IMEI SV to net: 33 45 22 03 13 62 35 23 F6

LOCK STATUS:

CONFIG KEY: 0000000000000000
PROVIDER KEY: 0000000000000000
Provider: Unknown provider
Key Code count: 0, FBUS Code count: 0

Log by MXKEY
Phone Type: RM-495 (Nokia 5130c-2)
Software Version: V 06.65 01-04-09 RM-495 (c) Nokia
Imei plain: 35932902982888-6
Language Pack:
- Not available.

Simlock invalid!

Seems to be valid SUPERDONGLE_KEY
SIMLOCK_TEST failed!
SECURITY_TEST passed


SIMLOCK_DATA corrupted!

A little extra on UNLOCK ......
"Nokia 5130c is SL3, does not support unlock, wait for updates ..." this is indeed correct, but this phrase is often said in the wrong place ..... so a bit misleading I think ...
Log on top not because mobile phones are locked, but because one simlock data (area AM 120) is a corrupt ... so just need to fix it ... not in the unlock.
Unlock Provider is the process by which embedded provider unlock nokia mobile phones which are locked in on a particular provider. Because one of them simlock data stored in the area of PM 308, then it's not currently possible to do ... PM308 protected from rewrite through the flash modes.


so there's no harm in advance memprbaiki section 1-309 pm and 120 pm ... before we mention that the 308 distinguished pm corrupted ...
__________________

 

[Musakatari]

Contact service nokia BB5 and BB5 phones + to second this as I know there are 2 causes:

- Software <<<
- Hardware

An easy way to detect it is by turning on without simcard Hp:

- Once ignited direct 'contact service'
most cases due to hardware
Can the power ic (retu, Tahvo, Betty, Avilma, or whatever his name) is problematic and / or RAP

- When it says 'Start up phone without simcard / turn on phone without sim card' emerging 'contact service'
I think 90% of cases due to software ...

Contact the service from the software itself is basic in my opinion there are 3 things, can be detected by doing a test cell as well as read pm broadcast:

1.Self test hp with the result: 'security test failed'

Caused corupt pm area 1 and 309 <<<<

for handling the same type of bb5 sl1/sl2/sl3 write pm area 1 and 309 (good)
using sx4 author,, sx4 bypass, or write 'blank RPL / Damaged sec.zone RPL' first and write pm .. (with back-up first RPL before surgery.
by way of the above should contact the service can terastasi.

2.Self test hp with the result: 'Simlock test failed'

Caused corupt pm area 308 <<<<

- For BB5 BB5 + SL1 and SL2 with hash CAEEBB65D3C48E6DC73B49DC5063A2EE00000000 = revert back up area of 308 pm (if any)
if there is no backup pm 308 can be repaired with unlock / repair sl zone using bb5/BB5 + unlocker
- For BB5 + SL2 (with hash: in addition to the above) and BB5 + SL3 = until I've created this article can only ask to RPL calculation.
(Issues that I heard a tool to unlock: Genie, DM3 (Raskal inside ..), Dejan TRK unlocker



3.Read manually pm area 120 (special BB5 + SL2 and SL3)

Broadly speaking there are only 2 types of area 120 pm valid for the universal area:

- [120] <<<<< 00,101,000 = Default Test Operator
0 = 800000000000000000101000000000000018010000000000 0020000001FFFFFF000000007FFF6F07FFFFFFFFF800003403 00050200101FFF

- [120] <<<<< 24,407,000 = Test Operators Nokia Finnland
0 = 800000000000000024407000000000000018010000000000 0020000001FFFFFF000000007FFF6F07FFFFFFFFF800003403 00050224407FFF

If the result of a read pm area different from the results above are usually phones in oprator key by another, for example:

- [120] <<<<< 23415000 = Vodafone; United Kingdom
0 = 800000000000000023415000000000000018010000000000 0020000001FFFFFF000000007FFF6F07FFFFFFFFF800003403 00050223415FFF

To contact the service repair due to the above is to insert / write pm area using pm:
00101000 = Default Test Operator
24407000 = Test Operators Nokia Finnland
(Copy of one of the 120 pm area above, paste it in notepad,, save with the extension pm,, write to hp)

ps:

A: How to contact the service after the repair process problems arise
- Charge not support
- Signal lost

Q: repeat the procedure write pm using sx4 author, etc., but this time edit the first full pm but am full it with notepad and delete the area of 42,62,308