SETool2 News & updates Here.

[josher]

v0.91373016

- lg u8550 (cid54) tp-less flashing (unlock via developers flash 07/08/etc)
- some minor improvements for multi-phones operations.


please note, you can flash ANYTHING into u8550. but once you will flash anything with certificate OTHER THAT RED54 - you will come to dead phone and only TP will cure it.

also please note, that when software says "DAMAGED SOFTWARE, REFLASH ORIGINAL", then YOU MUST FLASH ORIGINAL UNTOUCHED U8550 RED FIRMWARE (only main file)



EDIT- IMPORTANT - RE-DOWNLOAD SOFTWARE - CRITICAL BUG FIXED.

thanks for imobile for fast bugreport.

 

[josher]

v0.91373017

- cid49 added in empty board, sorry, forgot about it.
- progressbar is ok now (imobile, you know what i mean )


reuploaded version, probably fixes "not-opening" problem on some systems.

 

[josher]

v0.91380010


- fixed IMEI changing with w900
- tuned communications with comport, fixed NAK-errors (at least for me)
- added "Identify" for brown phones

 

[josher]

v0.91380011

- fixed ufs ignition with new drivers (i tested on 3.01.04)
- fixed identify
- again tuned com routines
- disabled recovery for all red49 phones (too much users killed their phones with it)
- returned old way for w550/w600 handling


notes on db2010 red49 support. seems, new method is half-working on db2010 phones.
looks like old hw phones not work with new method. so, i returned old method .

now, there is two w550 in model selection - old and new.
try first old, then, if it will not work - try new.
if new will not work too - sorry, only tp.

we will research it further, but hey... we must use what we have, right ?

 

[josher]

v1.03

- broken db2000,db2010 red cid49 support unsigned mode, fixed.

 

[josher]

warning:
please NOT try to flash samsung m5650 or any other emp-based samsung model with s5320 selected - you will damaged phone.
please wait for setool2 update, where that version will be listed in models.

 

[josher]

v1.04

- added support for samsung m5650 phone.
it is absolutely necessary to select correct model, otherwise phone will be trashed.
always add main part of firmware first when flashing.
- added unlock codes calculation for samsung s5320,m5650 phones.
select correct model, check signed mode, press unlock.
it is absolutely necessary to select correct model, otherwise nothing good will be done.
thx to zoio,GeniuSShadoW for testing.
- a2 emptyboard fill procedure now works as intended
- fixed support for unlock a2 cid80 phones, when signature server offline
- fixed few minor bugs
- updated drivers

 

[josher]

v1.05

- some newer ODM firmwares were not parsed properly, fixed
- few cosmetic fixes

 

[josher]

v1.06

- added support for qsd8250-based semc phones (x10 at the moment).
flashing,gesture lock reset,trim area read/write is standalone and free
please note, high quality usb cable required to work with x10.
network unlock is server-based and paid.
x10 network unlock disabled for public at the moment.

- added support for a2 cid81 phones.
flashing,user lock reset,gdfs area read/write is standalone and free
network unlock is server-based and paid.

- few cosmetic fixes

 

[josher]

v1.07

- fatal flashing bug fixed.
odm phones, pda phones was affected.
greatly sorry for inconveniences.

- memory consumption decreased while flashing x10 phones.

 

[josher]

please do not attempt to unlock lg gt400 phone by selected lg db3200-based model - it will kill your phone.
please wait until setool2 will officially support lg gt400 unlock.
flashing should be safe, though (by selecting any lg db3200-based model)

beside that, if anyone willing to send me working locked gt400, please contact with unlocker.
of course, not for free, but not for 1000 eur,please.

 

[josher]

v1.08

Code:
- x10mini support added.
yes, network unlock still unavailable for public.
do not ask us for special x10-enabled accounts - they not exists.

- different bugfixes

 

[josher]

v1.081

Code:
- increased server communication timeouts, can help in case of timeout errors
- different cosmetic bugfixes

 

[josher]

v1.084

Code:
- lg gt40x phones unlock/repair/flash functionality now works as intended, check FAQ for details
- no need to reflash after unlock some specific lg db3200-based phones from now on
- lg db3200-based phones now can utilize full USB2.0 speed
- further decreased memory usage during flashing of x1-alike phones
- different cosmetic bugfixes

 

[josher]

v1.085

Code:
- updated a2 loaders
- updated s1 loaders
- different cosmetic bugfixes


Rapidshare Link