samsung s5230 dead when write firmware i have samsung s5230 with restart problem when i 'm flash it with z3x it is dead now set not power on and not go to download mode when try reapir with dead boot
samsung s5230 dead when write firmware
i have samsung s5230 with restart problem when i 'm flash it with z3x it is dead now set not power on and not go to download mode when try reapir with dead boot reapir tool SAMSUNG S5230-S3650 Dead phone Repair FREE!!!!!
it show this error
* How to use Download Mode
1. Turn off the target phone!!!
2. Select COM Port(USB or UART) , Baud Rate.
3. Push the Start Button.
4. Turn on the target phone!!!
* Connecting to target phone
Try to open COM3 >Success!!
-
Turn on the target phone immediately!!!!
Listen for the BOOT signal > > > OK
Send the Download start signal > > > OK
* NAND Flash Driver Download
preboot downloading > > > OK
NAND Flash driver downloading > > > OK
Flash Type Checking > > > device_id=0 FAIL
( Elapsed Time : 18.6s)
OK
UART Download Mode > > > Available
* Bootloader area erase
Open Comport > > > OK
Now NAND All blocks erasing > > > OK
* How to use Download Mode
1. Turn off the target phone!!!
2. Select COM Port(USB or UART) , Baud Rate.
3. Push the Start Button.
4. Turn on the target phone!!!
-----------------------------------------------------------------------------
Bootloader Download mode ( COM3 BaudRate : 115k )
-----------------------------------------------------------------------------
SDRAM initializing........... OK
FlashLoader download & running...........FAIL
Turn On/Off the target phone!!!
how to solve this problem
samsung s5230 dead when write firmware
i have samsung s5230 with restart problem when i 'm flash it with z3x it is dead now set not power on and not go to download mode when try reapir with dead boot reapir tool SAMSUNG S5230-S3650 Dead phone Repair FREE!!!!!
it show this error
* How to use Download Mode
1. Turn off the target phone!!!
2. Select COM Port(USB or UART) , Baud Rate.
3. Push the Start Button.
4. Turn on the target phone!!!
* Connecting to target phone
Try to open COM3 >Success!!
-
Turn on the target phone immediately!!!!
Listen for the BOOT signal > > > OK
Send the Download start signal > > > OK
* NAND Flash Driver Download
preboot downloading > > > OK
NAND Flash driver downloading > > > OK
Flash Type Checking > > > device_id=0 FAIL
( Elapsed Time : 18.6s)
OK
UART Download Mode > > > Available
* Bootloader area erase
Open Comport > > > OK
Now NAND All blocks erasing > > > OK
* How to use Download Mode
1. Turn off the target phone!!!
2. Select COM Port(USB or UART) , Baud Rate.
3. Push the Start Button.
4. Turn on the target phone!!!
-----------------------------------------------------------------------------
Bootloader Download mode ( COM3 BaudRate : 115k )
-----------------------------------------------------------------------------
SDRAM initializing........... OK
FlashLoader download & running...........FAIL
Turn On/Off the target phone!!!
how to solve this problem