New Vision
Well-known Member
- Joined
- Nov 26, 2011
- Posts
- 615
- Likes
- 6
Post here all successfuly flashed, unlocked and repaired phones with AvatorBox
Post here all successfuly flashed, unlocked and repaired phones with AvatorBox
- Thread starter New Vision
- Start date
New Vision
Well-known Member
- Joined
- Nov 26, 2011
- Posts
- 615
- Likes
- 6
answer: Post here all successfuly flashed, unlocked and repaired phones with AvatorBox
successfully read code spd with avator
New Vision
Well-known Member
- Joined
- Nov 26, 2011
- Posts
- 615
- Likes
- 6
answer: Post here all successfuly flashed, unlocked and repaired phones with AvatorBox
New Vision
Well-known Member
- Joined
- Nov 26, 2011
- Posts
- 615
- Likes
- 6
answer: Post here all successfuly flashed, unlocked and repaired phones with AvatorBox
Format mtk
New Vision
Well-known Member
- Joined
- Nov 26, 2011
- Posts
- 615
- Likes
- 6
answer: Post here all successfuly flashed, unlocked and repaired phones with AvatorBox
Initializing...
DA_LIB_VER_2.5.1.1
It is sensing the pinout fast,please hold on the phone Power key
RXD=23 TXD=22
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC257E25082501
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: V940_V02
Changing baudrate to 115200...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
DA_LIB_VER_2.5.1.1
It is sensing the pinout fast,please hold on the phone Power key
RXD=23 TXD=22
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC257E25082501
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: V940_V02
Changing baudrate to 115200...
Done.
Formating Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
New Vision
Well-known Member
- Joined
- Nov 26, 2011
- Posts
- 615
- Likes
- 6
answer: Post here all successfuly flashed, unlocked and repaired phones with AvatorBox
NKTEL A200 Call Failed Done in 2 mints
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 115200 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_TV00560002EDGB
Set FLASH Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 0A
IMEI 1=353035042368646
IMEI 2=353035042368653
--------NOR_FLASH_CONFIG--------
Flash Bank count=1
EFS sector count=15
File sector count=0
Sector size=0x00010000
Flash start addr=0x00000000
Flash size=0x00800000
Fix NV addr=0x006F0000
Product information addr=0x007F0000
MMI resource addr=0x00600000
------Auto Format Address-------
Start=0x00700000
Size =0x000F0000
Read FS info...done
Initializing...
DA_LIB_VER_2.5.1.1
It is sensing the pinout fast...
D-=10 D+=7
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM26
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700538E3A000_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 115200 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_TV00560002EDGB
Set FLASH Parameters...
Settings have been completed!
Reading Flash...
All Done.
Initializing...
DA_LIB_VER_2.5.1.1
It is sensing the pinout fast...
D-=10 D+=7
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM26
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700538E3A000_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_TV00560002EDGB
Set FLASH Parameters...
Settings have been completed!
Connect and search Security Code...
Privacy protect: 1122
Done.
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 115200 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_TV00560002EDGB
Set FLASH Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 0A
IMEI 1=353035042368646
IMEI 2=353035042368653
--------NOR_FLASH_CONFIG--------
Flash Bank count=1
EFS sector count=15
File sector count=0
Sector size=0x00010000
Flash start addr=0x00000000
Flash size=0x00800000
Fix NV addr=0x006F0000
Product information addr=0x007F0000
MMI resource addr=0x00600000
------Auto Format Address-------
Start=0x00700000
Size =0x000F0000
Read FS info...done
Initializing...
DA_LIB_VER_2.5.1.1
It is sensing the pinout fast...
D-=10 D+=7
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM26
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700538E3A000_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 115200 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_TV00560002EDGB
Set FLASH Parameters...
Settings have been completed!
Reading Flash...
All Done.
Initializing...
DA_LIB_VER_2.5.1.1
It is sensing the pinout fast...
D-=10 D+=7
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM26
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700538E3A000_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226A Flash: NOR_TV00560002EDGB
Set FLASH Parameters...
Settings have been completed!
Connect and search Security Code...
Privacy protect: 1122
Done.
New Vision
Well-known Member
- Joined
- Nov 26, 2011
- Posts
- 615
- Likes
- 6
answer: Post here all successfuly flashed, unlocked and repaired phones with AvatorBox
c3-01 mstar touchscreen phone
New Vision
Well-known Member
- Joined
- Nov 26, 2011
- Posts
- 615
- Likes
- 6
answer: Post here all successfuly flashed, unlocked and repaired phones with AvatorBox
Imei repair
Chip=MTK
Action=IMEI
FlashType=NOR
boot=Ver3.1108
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
FlashFile=
Comport=COM9
Baudrate=921600
Initializing...
DA_LIB_VER_3.7.0.4
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=21 TXD=23
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6252, HardwareVer:8B00, SoftwareVer:CE00
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
IMEI=353456789062343
IMEI=353456789072342
IMEI=353456789072342
Rebulid IMEI1=353456789062343
Rebulid IMEI2=353456789072342
Chip=MTK
Action=IMEI
FlashType=NOR
boot=Ver3.1108
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
FlashFile=
Comport=COM9
Baudrate=921600
Initializing...
DA_LIB_VER_3.7.0.4
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=21 TXD=23
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6252, HardwareVer:8B00, SoftwareVer:CE00
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
IMEI=353456789062343
IMEI=353456789072342
IMEI=353456789072342
Rebulid IMEI1=353456789062343
Rebulid IMEI2=353456789072342
New Vision
Well-known Member
- Joined
- Nov 26, 2011
- Posts
- 615
- Likes
- 6
answer: Post here all successfuly flashed, unlocked and repaired phones with AvatorBox
New Vision
Well-known Member
- Joined
- Nov 26, 2011
- Posts
- 615
- Likes
- 6
answer: Post here all successfuly flashed, unlocked and repaired phones with AvatorBox
