LG GT505 Flash successfully setool

[Jinda]

Open Setool2g.exe
select 'SEMC A2' Tab
Select model: LG GT500
Add firmware (3files) like below:

GT505_CXC_FS_CABS_LP_NAND_commercial_EUR_OPEN.ssw
GT505_cxc000000_APPLICATION_PHONE_SB_IAR-ARM-NAND_EUR_OPEN.ssw
GT505_CXC_LGPXO_SYS_CABS_LP_NAND_commercial.ssw

then go 'Settings' tab
Tick to 'SIGNED MODE (SERVER USED FOR BYPASS/CSCA IF NEED)
then again select 'SEMC A2' Tab
then click 'flash'
Use nokia c101 data cable
Boot Mode: Insert battery then hold volume+ key then insert data cable

See log and enjoy.

RUNNING v 1.01/UNI
CARD SERIAL 00xxxxx
SIGNED MODE (USING SERVER)
CFG:100000000000
ChipID900,EMP protocol:0401
BOOTROM MODE DETECTED
OTP DBG: [1,54,0,35469503416882]
OTP LOCKED:1 CID:54 PAF:0 IMEI:35469503416882 CERT:RED
LDR:080805 1255 YTRCXC1723918_A2_DB3200_PRODUCTION_LOADER_ACC_SDRAM_P2B
LDR CAPS:SYSTEM SIGNATURE
LDR:080905 0936 YTRCXC1723919_1A2_DB3200_PRODUCTION_LOADER_APP_SDRAM_JEFF_CABS_P2D
LDR CAPS:SYSTEM FLASH GDFS FILESYSTEM
writing "G:\z3x\Collection\Flash File\LG\GT 505\GT505_CXC_FS_CABS_LP_NAND_commercial_EUR_OPEN.ssw"
ALLOWED DOMAINS:BLUE BROWN RED
MAXIMUM CID:54
Will flash 1467 blocks...
ssw file accepted
writing "G:\z3x\Collection\Flash File\LG\GT 505\GT505_cxc000000_APPLICATION_PHONE_SB_IAR-ARM-NAND_EUR_OPEN.ssw"
ALLOWED DOMAINS:BLUE BROWN RED
MAXIMUM CID:54
Will flash 633 blocks...
ssw file accepted
writing "G:\z3x\Collection\Flash File\LG\GT 505\GT505_CXC_LGPXO_SYS_CABS_LP_NAND_commercial.ssw"
ALLOWED DOMAINS:BLUE BROWN RED
MAXIMUM CID:54
Will flash 332 blocks...
ssw file accepted
Phone detached
Elapsed: 605 secs.