Micromax C100 (QSC1100) download guide 1. Connect the phone to PC by USB cable. If it is the first time connection, the driver
should be installed according to the requirement.
2. After connection successfully, confirm the COM port of the phone. For example:
the port of following Picture is COM4. (system properties>hardware>device
manager>Ports) http://i1206.photobucket.com/albums/...Micromax/1.jpg
3. Click MutiDL 60X5_11XX_V2.51 in the tool Folder.
4. Then you will get the following interface:
You can choose the correct port accordingly, in our example, the port No is COM4, so we
select COM4.
5. Select “Open”, you will get the following interface, select Browse, then you can
choose the SW in your PC, and choose the file named “config.bmbn” and “open” it.
Normally we will mark the “Erase EFS” option. This will erase everything in the
phone.
8. Wait the downloading, as the following pictures: if the process bar is blue, it means
during the download process, please do not interrupt it. If the bar is green, and it
shows “Download OK” it means the download is finish. While if the bar is red, it
means some failure happens during the download. 9. Finish. When you see the green bar and “Download OK” it means this flashing
process is done.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.