[FONT=verdana,geneva]After The Samsung Galaxy S4 came to markets and the US market is one of them, You may need to update the firmware version of M919 GS4 from T-Mobile to a newer one or even to fix some errors that could happen during the normal use of it, So this Guide will help you in your mission.[/FONT]
[FONT=verdana,geneva]
Important Notices:[/FONT]
[FONT=verdana,geneva]- Make a backup of your phone's data before making any update, Otherwise you will not be able to recover anything from it after updating its firmware.
- Charge the phone's battery to be at least at 90%.
- Use stable computer to perform the update process.
- Use only the original USB cable of your Samsung M919 GS4 mobile phone.
Downloads:[/FONT]
[FONT=verdana,geneva]- Samsung M919 GS4 Stock Firmware Package: Extract the package after downloading.
- Odin Flasher: Extract it for using it later
- USB Drivers of Samsung M919 GS4: Install the drivers and restart your computer after that.
Tools:
- Original USB cable of Samsung M919 GS4.
- A computer running Windows OS.[/FONT]
[FONT=verdana,geneva]
Samsung M919 GS4 Firmware Update Steps:[/FONT]
[FONT=verdana,geneva]- Turn off your Samsung M919 GS4.[/FONT]
[FONT=verdana,geneva]- Take out the SIM-card, And memory card in case it has one inside.[/FONT]
[FONT=verdana,geneva]- Run Odin.exe program.[/FONT]
[FONT=verdana,geneva]- Check the following options: Auto Reboot, F.Reset Time[/FONT]
[FONT=verdana,geneva]- Click on PDA button at Odin's window.[/FONT]
[FONT=verdana,geneva]- From the extracted firmware package select this file:
M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5
- To put your M919 GS4 into Download Mode press and hold Volume Down key + Home key, Then press Power button until you see the warning message on its screen, Then release all keys and press Volume Up key to be into Download Mode.[/FONT]
[FONT=verdana,geneva]- Use the original USB cable to connect your Samsung M919 GS4 to the computer.[/FONT]
[FONT=verdana,geneva]- Wait until Windows detects the phone and installs the needed drivers for it.[/FONT]
[FONT=verdana,geneva]- When Odin program detects your phone you can see the COM port number of it 0:[COMxx][/FONT]
[FONT=verdana,geneva]- Now you are ready for the update, Just click on Start button.[/FONT]
[FONT=verdana,geneva]- Odin program will do the job for you, So give it some minutes.[/FONT]
[FONT=verdana,geneva]- Your Samsung M919 GS4 will be rebooted after installing the new firmware files into it.[/FONT]
[FONT=verdana,geneva]- In case the update was done successfully then you will see PASS! Word at Odin's window.[/FONT]
[FONT=verdana,geneva]- After the Samsung M919 GS4 is fully on enter this code *2767*3855#[/FONT]
[FONT=verdana,geneva]- The phone will restart one more time.[/FONT]
[FONT=verdana,geneva]- Now when your Samsung M919 GS4 is on again you can use it and select the wanted settings.
[/FONT][FONT=verdana,geneva]BR,[/FONT]
[FONT=verdana,geneva]TrustsolutionBD[/FONT]
[FONT=verdana,geneva]
Important Notices:[/FONT]
[FONT=verdana,geneva]- Make a backup of your phone's data before making any update, Otherwise you will not be able to recover anything from it after updating its firmware.
- Charge the phone's battery to be at least at 90%.
- Use stable computer to perform the update process.
- Use only the original USB cable of your Samsung M919 GS4 mobile phone.
Downloads:[/FONT]
[FONT=verdana,geneva]- Samsung M919 GS4 Stock Firmware Package: Extract the package after downloading.
- Odin Flasher: Extract it for using it later
- USB Drivers of Samsung M919 GS4: Install the drivers and restart your computer after that.
Tools:
- Original USB cable of Samsung M919 GS4.
- A computer running Windows OS.[/FONT]
[FONT=verdana,geneva]
Samsung M919 GS4 Firmware Update Steps:[/FONT]
[FONT=verdana,geneva]- Turn off your Samsung M919 GS4.[/FONT]
[FONT=verdana,geneva]- Take out the SIM-card, And memory card in case it has one inside.[/FONT]
[FONT=verdana,geneva]- Run Odin.exe program.[/FONT]
[FONT=verdana,geneva]- Check the following options: Auto Reboot, F.Reset Time[/FONT]
[FONT=verdana,geneva]- Click on PDA button at Odin's window.[/FONT]
[FONT=verdana,geneva]- From the extracted firmware package select this file:
M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar.md5
- To put your M919 GS4 into Download Mode press and hold Volume Down key + Home key, Then press Power button until you see the warning message on its screen, Then release all keys and press Volume Up key to be into Download Mode.[/FONT]
[FONT=verdana,geneva]- Use the original USB cable to connect your Samsung M919 GS4 to the computer.[/FONT]
[FONT=verdana,geneva]- Wait until Windows detects the phone and installs the needed drivers for it.[/FONT]
[FONT=verdana,geneva]- When Odin program detects your phone you can see the COM port number of it 0:[COMxx][/FONT]
[FONT=verdana,geneva]- Now you are ready for the update, Just click on Start button.[/FONT]
[FONT=verdana,geneva]- Odin program will do the job for you, So give it some minutes.[/FONT]
[FONT=verdana,geneva]- Your Samsung M919 GS4 will be rebooted after installing the new firmware files into it.[/FONT]
[FONT=verdana,geneva]- In case the update was done successfully then you will see PASS! Word at Odin's window.[/FONT]
[FONT=verdana,geneva]- After the Samsung M919 GS4 is fully on enter this code *2767*3855#[/FONT]
[FONT=verdana,geneva]- The phone will restart one more time.[/FONT]
[FONT=verdana,geneva]- Now when your Samsung M919 GS4 is on again you can use it and select the wanted settings.
[/FONT][FONT=verdana,geneva]BR,[/FONT]
[FONT=verdana,geneva]TrustsolutionBD[/FONT]