Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Read Info

Chip=SpreadTrum
Action=ReadInfo
FlashType=NOR
boot=6600L/WT6226-USB
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=
Comport=COM4
Baudrate=921600

CPU_Type=SC6600L2
CPU_ID=66007001
NOR_ID=0020881000000000
NOR_Size=8MB
NOR_Name=NOR_ST_M58WR064KT
NOR_DieCnt=1
NAND_ID=
NAND_Size=
NAND_Name=

Initializing...
DA_LIB_VER_3.2.2.7
It is sensing the pinout fast...
D-=8 D+=9
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM7
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_ST_M58WR064KT
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 0A
--------NOR_FLASH_CONFIG--------
Flash Bank count=1
EFS sector count=4
File sector count=0
Sector size=0x00010000
Flash start addr=0x00000000
Flash size=0x00800000
Fix NV addr=0x007A0000
Product information addr=0x007F0000
MMI resource addr=0x005E0000
------Auto Format Address-------
Start=0x007B0000
Size =0x00040000
Read FS info...done

Read Flash

Chip=SpreadTrum
Action=ReadFlash
FlashType=NOR
boot=6600L/WT6226-USB
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=2730
Comport=COM4
Baudrate=921600

CPU_Type=SC6600L2
CPU_ID=66007001
NOR_ID=0020881000000000
NOR_Size=8MB
NOR_Name=NOR_ST_M58WR064KT
NOR_DieCnt=1
NAND_ID=
NAND_Size=
NAND_Name=

Initializing...
DA_LIB_VER_3.2.2.7
It is sensing the pinout fast...
D-=8 D+=9
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM7
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_ST_M58WR064KT
setting the Flash Parameters...
Settings have been completed!
Reading Flash...
Saved file to:
2730
All Done.
Reading Project Version...
Platform Version: MOCOR_09A.W09.37_P2.21_Release
Project Version: SC6600L_sp6601l
MMI Version: 5110-0001-V1.0.0-L0000-C0001-B01-M0001-F00-Y00-FR00-SIM00-D00-20100508-V3.50-0937P2
BASE Version: BASE_W09.20_P35.6
HW Version: 5110 V2.0
Project Bulid Time: 10-23-2010 12:4:19

Reset

Chip=SpreadTrum
Action=Reset
FlashType=NOR
boot=6600L/WT6226-USB
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=2730
Comport=COM4
Baudrate=921600

CPU_Type=SC6600L2
CPU_ID=66007001
NOR_ID=0020881000000000
NOR_Size=8MB
NOR_Name=NOR_ST_M58WR064KT
NOR_DieCnt=1
NAND_ID=
NAND_Size=
NAND_Name=

Initializing...
DA_LIB_VER_3.2.2.7
It is sensing the pinout fast...
D-=8 D+=9
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM7
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_ST_M58WR064KT
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Analyzing FileSystem...
Done.
Reset the user data area...
Note: if user partition size is more than 4MB, The phone would may take 1 minute to rebuild FileSystem after Reset Action.
All Done.

Format

Chip=SpreadTrum
Action=Format
FlashType=NOR
boot=6600L/WT6226-USB
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=2730
Comport=COM4
Baudrate=921600

CPU_Type=SC6600L2
CPU_ID=66007001
NOR_ID=0020881000000000
NOR_Size=8MB
NOR_Name=NOR_ST_M58WR064KT
NOR_DieCnt=1
NAND_ID=
NAND_Size=
NAND_Name=

Initializing...
DA_LIB_VER_3.2.2.7
It is sensing the pinout fast...
D-=8 D+=9
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM7
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_ST_M58WR064KT
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x007B0000, Size=0x00040000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.
 

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Nokia J5000 Dead set Alive Initializing...
DA_LIB_VER_3.2.2.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=9 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 0001007E00630001
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: C100A3.JHZ.J5000.UI301.110128.04


Flash


Initializing...
DA_LIB_VER_3.2.2.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=9 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 0001007E00630001
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: C100A3.JHZ.J5000.UI301.110128.04
Changing baudrate to 921600...
Done.
Analyzing the UID-Encryption info, Some file may need a long time...
The file has not been encrypted.
Downloading Flash file...
All Done.
 

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

6300 single sim dead revives dragon through flashing even dual sim firmware.

Initializing...
DA_LIB_VER_3.2.2.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=21 TXD=22
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6226, HardwareVer:8A02, SoftwareVer:8A01
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 00EC22E000000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: MAUI.08B.W09.08.MP.V2
Changing baudrate to 921600...
Done.
Analyzing the UID-Encryption info, Some file may need a long time...
The file has not been encrypted.
Downloading Flash file...
All Done.
 

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

boom B8 Format Initializing...
DA_LIB_VER_3.2.2.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=9 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 0001007E00630001
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: C100A3.HZ11.BOOM01.110120.01


Initializing...
DA_LIB_VER_3.2.2.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=9 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 0001007E00630001
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: C100A3.HZ11.BOOM01.110120.01
Changing baudrate to 921600...
Done.
Reading full Flash...
Saved file to:
boom b8
All Done.



Initializing...
DA_LIB_VER_3.2.2.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=9 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 0001007E00630001
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: C100A3.HZ11.BOOM01.110120.01
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
 

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

lock code done via unlock

Initializing...
DA_LIB_VER_3.2.2.7
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=22 TXD=20
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6223, HardwareVer:8A05, SoftwareVer:8A00
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
Code=1122
Code=3024
 

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

spd blinkig reapir 82000 Format

Chip=SpreadTrum
Action=Format
FlashType=NOR
boot=6600L/WT6226-COM
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=
Comport=COM4
Baudrate=921600

CPU_Type=SC6600L
CPU_ID=66007000
NOR_ID=0098000300000001
NOR_Size=16MB
NOR_Name=NOR_TV00570002xDGB
NOR_DieCnt=1
NAND_ID=
NAND_Size=
NAND_Name=

Initializing...
DA_LIB_VER_3.2.2.7
It is sensing the pinout fast...
RXD=4 TXD=7
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700000020000_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L Flash: NOR_TV00570002xDGB
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x00F00000, Size=0x000E0000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.


Reset


Chip=SpreadTrum
Action=Reset
FlashType=NOR
boot=6600L/WT6226-USB
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=
Comport=COM4
Baudrate=921600

CPU_Type=SC6600L
CPU_ID=66007000
NOR_ID=0098000300000001
NOR_Size=16MB
NOR_Name=NOR_TV00570002xDGB
NOR_DieCnt=1
NAND_ID=
NAND_Size=
NAND_Name=

Initializing...
DA_LIB_VER_3.2.2.7
It is sensing the pinout fast...
D-=17 D+=19
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM7
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700000025A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L Flash: NOR_TV00570002xDGB
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Analyzing FileSystem...
Done.
Reset the user data area...
Note: if user partition size is more than 4MB, The phone would may take 1 minute to rebuild FileSystem after Reset Action.
All Done.
 

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

MFU 6700i Format done Initializing...
DA_LIB_VER_3.2.2.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=21 TXD=24
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 002088C400000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: TL_T670P2U360_F08LO1_00.42
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
 

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

NKTEL 2008 Restart Done Chip=MTK
Action=Format
FlashType=NOR
boot=Ver3.1016
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=2008
Comport=COM4
Baudrate=921600

CPU_Type=MT6225
CPU_ID=B703000D
NOR_ID=0098000300000000
NOR_Size=16MB
NOR_Name=[TOSHIBA] TC58FVM7TDD
NOR_DieCnt=
NAND_ID=0000000000000000
NAND_Size=0MB
NAND_Name=Nand:N/A

Initializing...
DA_LIB_VER_3.2.2.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=5 TXD=6
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0098000300000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI...
H/W detection ok.
Get Project ID from phone...
Project ID: N96_P11_TOSHIBA_S5LCD_V1.0.2
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
 

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Initializing...
DA_LIB_VER_3.2.2.7
It is sensing the pinout fast...
D-=10 D+=7
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM9
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_TV00560002EDGB
setting the Flash Parameters...
Settings have been completed!
Connect and search Security Code...
PhoneLock: 0553
PhoneLock: 0554
PhoneLock: 0531
PhoneLock: 0911
PhoneLock: 0891
Privacy protect: 1122
PhoneLock: 553322
Done.
 

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

K600 format done

Initializing...
DA_LIB_VER_3.2.2.7
It is sensing the pinout fast...
D-=10 D+=7
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM11
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700500005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: SC6600L/WT6226 Flash: NOR_TV00570002xDGB
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x00F00000, Size=0x000E0000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.
 

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Initializing...
DA_LIB_VER_3.2.2.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=4 TXD=5
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6226, HardwareVer:8A02, SoftwareVer:8A01
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 002088C400000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: J26.SW.V00.02.YIDU
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
 

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Initializing...
DA_LIB_VER_3.2.2.7
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=9 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
Code=0030
Code=1996
 

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

iphone 4 format

Initializing...
DA_LIB_VER_3.2.2.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=6 TXD=7
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6253, HardwareVer:8A00, SoftwareVer:8A02
Loading boot...
INT_SYSRAM_BOOT test completed.
Nor Flash ID: 0001007E00630001
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: T313.V48.F1.FM.CN
Changing baudrate to 115200...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
 

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

Initializing...
DA_LIB_VER_3.2.2.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=21 TXD=20
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 002088C400000000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Get Project ID from phone...
Project ID: M8708TP_P2_T3W0_MATRIX_V02
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x00E00000, size=0x00200000
All Done
 

Jonab Ru

Super Moderator
Joined
Feb 3, 2011
Posts
1,838
Likes
6
answer: GPG Dragon Successfully Unlocked / Repaired / Flashed Phones !!!

L800 unlocked

Initializing...
DA_LIB_VER_3.2.2.7
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=22 TXD=8
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6225, HardwareVer:8A05, SoftwareVer:8A00
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
Code=1122
Code=72543
 
Back
Top