digital_amit

Junior Member
Joined
Oct 31, 2011
Posts
27
Likes
0
1680c whitescreen done by cyclonebox
procedure
open cyclone
click dct4/wd2/bb5
wait for boot box
click dct4
use universal cable set 5.1k
click mcu ppm cnt to add flashfile
click checking bus
click flash
click unlock
here logs
Quote:
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v01.35, (Apr 16 2010 18:05:39, gcc v4.3.2, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2010 wk13
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number: ernie78
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2008, wk32
Initializing security card...
Card Serial Number: ernie78
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 5.14v PASSED
MCU Voltage 3.27v PASSED
Core Voltage 1.80v PASSED
VBAT Voltage 1.39v PASSED
VBAT Voltage 5.06v PASSED
Box VPP disabled
VPP Voltage 0.04v PASSED
Internal Box VPP Enabled
VPP Voltage 5.06v PASSED
Box VPP disabled
VPP Voltage 0.00v PASSED
External Box VPP Enabled
VPP Voltage 0.00v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
Initializing FBUS...
All initialized - Ready to work
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.79.0, Algo: DCT4
PLL Factor: 3
FlashChip[0]: 0x0001317E @ 0x01000000, AMD, SectorSize: 128kB, Ext: 00419221
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 4Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x0001317E (256Mbits), Rev: 7.4.79.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.00V
Terminating flash session
Boot operation took 7.437s
Check Flashing Bus finished
Processing pre-flash tasks...
Pre-flash tasks finished
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm394__05.63.mcusw, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.79.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0001317E @ 0x01000000, AMD, SectorSize: 128kB, Ext: 00419221
FlashChip[1]: 0x0001317E @ 0x02000000, AMD, SectorSize: 128kB, Ext: 00419221
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x0001317E (256Mbits), Rev: 7.4.79.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.02V
MSID-Crypted: 843234461E15DE68F8CD232B23
MSID-Plain: 2C40BAE900C1060DAA000000
FAID-Crypted: F16FF15AC35465D447C3F240
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x01000000-0x0101FFFF]
Erasing NOR Region [0x01020000-0x01C3FFFF]
Erase taken 48.78s
Writing 327 blocks...
All blocks written OK! Time taken 193.140s
Terminating flash session
Box VPP disabled
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm394__05.63.image_el, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.79.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0001317E @ 0x01000000, AMD, SectorSize: 128kB, Ext: 00419221
FlashChip[1]: 0x0001317E @ 0x02000000, AMD, SectorSize: 128kB, Ext: 00419221
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x0001317E (256Mbits), Rev: 7.4.79.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.00V
MSID-Crypted: 8480CCAE498D3D28874F013817
MSID-Plain: D26EBAF100C1060DAA000610
FAID-Crypted: CA092DD0DCC6D6244AAB569D
Flashbus Write baud set to 6.50Mbits
2 Region(s) to erase
Erasing NOR Region [0x02000000-0x02DBFFFF]
Erasing NOR Region [0x02DC0000-0x02F9FFFF]
Erase taken 63.0s
File Sector Size: 128kB, Flash Chip Sector Size: 128kB
CNT Convertion not needed
Writing 264 blocks...
All blocks written OK! Time taken 80.688s
Terminating flash session
Extracting Content Package...
CP Extract Failed -> CP Server not exists
WARNING: Failed to extract CP
Box VPP disabled
Booting UPP...
UPP ID: 3162 [HW_UNKNOWN]
rm394__05.63.ppm_el, Type: Flash Image, Algo: DCT4, DCT4 ALGORITHM
Flashbus Write baud set to 100Kbits
u3_2nd.fia, Type: 2nd Boot Loader, Rev: 7.4.79.0, Algo: DCT4
Box VPP disabled
Internal Phone VPP Selected
PLL Factor: 3
FlashChip[0]: 0x0001317E @ 0x01000000, AMD, SectorSize: 128kB, Ext: 00419221
FlashChip[1]: 0x0001317E @ 0x02000000, AMD, SectorSize: 128kB, Ext: 00419221
Signature: AD7EB61A1BBE0BE27D586BE4DBEE6514
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 51Kbits
u3_amd.fia, Type: Algorithm, Target: FlashChip[0] 0x0001317E (256Mbits), Rev: 7.4.79.0, Algo: DCT4 ALGORITHM
Nominal VPP Voltage: 9V, Detected: 0.04V
MSID-Crypted: 84054A395F32343E99171FABF9
MSID-Plain: 3E4EBAE900C1060DA9000000
FAID-Crypted: B9BE58BB4FE581B94FA04BC6
Flashbus Write baud set to 6.50Mbits
1 Region(s) to erase
Erasing NOR Region [0x01C40000-0x01FFFFFF]
Erase taken 14.516s
Writing 79 blocks...
All blocks written OK! Time taken 48.594s
Terminating flash session
Box VPP disabled
Processing post-flash tasks...
Post-flash tasks finished...
Flash successfully finished!
MCU Version V 05.63
MCU Date 20-06-08
Product RM-394
Manufacturer (c) Nokia
IMEI 353527021307389
Mastercode 1314524343
Proceeding with RSA Unlock...
Warning: Failed to read SP Info, Assuming defaults
Asic 11
HW Signature 808F1E50A3EC5748
Simlock Server SIMLOCK SERVER
Simlock Key 5555555555555555
Simlock Profile 5555555555015555
Simlock Aux 000B5555
Simlock IMEI 00553535270213073800
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Asking card to sign HW Signature...
Signed OK (6089DB73CE80FF9170F5967D877BB2527A8BCED0)
Calculating SP...
Writing SP...
New SP Accepted OK!
Phone unlocked OK!
here result
IMG1171A.jpg

IMG1172A.jpg




DIGITAL -AMIT
sifone.gif
 
Top