NR1 - The product description:
NEW: Tornado TP Microscope!!!
Special for BB5 Unlocking !!!
- Use it to make TP on BB5 Unlocking process.
- So, it is a microscope FOR visualising TESTPOINTS, in particulary BB5 TP.
NR2: The device looks like this:
Nr3: The captured immage looks like this:
ALL THE CAPTURED PICTURES where made by myself and are the real pictures , as obtained from the camera.
This is what is described and this is what the tool can do!
MOST IMPORTANT: FOR 6280: It is VERRY IMPORTANT TO MAKE THE RIGHT ADJUSTMENTS EXACTLY IN THE ORDER I TELL YOU, else you will not be able to use the microscope.
1 - Bring the microscope-CAMERA more NEAR the PCB - about 2cm (adjustment is avaiable for this)
2 - Use the atached imbus key to unblock the Optical part and FOCUS FROM THERE
After you focus -> Block that adjustment back with the imbus key
3 - Use the 2-nd adjustment of the optical part of the microscope in order to get a good picture.
4- You have also a SCALE button in the software in order to "zoom" more
5 - Verry important is also to make the setups in the software like in the 2 atached pictures, in order to get a good image without delays. (screenshots provided by one of our customers)
http:///vbb/showpo...8&postcount=14
If all is ok, you will get the IMAGE, as you see here:
NEW: Tornado TP Microscope!!!
Special for BB5 Unlocking !!!
- Use it to make TP on BB5 Unlocking process.
- So, it is a microscope FOR visualising TESTPOINTS, in particulary BB5 TP.
NR2: The device looks like this:
Nr3: The captured immage looks like this:
ALL THE CAPTURED PICTURES where made by myself and are the real pictures , as obtained from the camera.
This is what is described and this is what the tool can do!
MOST IMPORTANT: FOR 6280: It is VERRY IMPORTANT TO MAKE THE RIGHT ADJUSTMENTS EXACTLY IN THE ORDER I TELL YOU, else you will not be able to use the microscope.
1 - Bring the microscope-CAMERA more NEAR the PCB - about 2cm (adjustment is avaiable for this)
2 - Use the atached imbus key to unblock the Optical part and FOCUS FROM THERE
After you focus -> Block that adjustment back with the imbus key
3 - Use the 2-nd adjustment of the optical part of the microscope in order to get a good picture.
4- You have also a SCALE button in the software in order to "zoom" more
5 - Verry important is also to make the setups in the software like in the 2 atached pictures, in order to get a good image without delays. (screenshots provided by one of our customers)
http:///vbb/showpo...8&postcount=14
If all is ok, you will get the IMAGE, as you see here: