Tornado Infra Pro Rework Station - now with bigger preheaters for FASTER and SAFER reworking!
---Best for Big BGA IC's such as laptop motherboards, PC motherboards, xbox360, PS3 and many other gaming consoles ---
---Best for Big BGA IC's such as laptop motherboards, PC motherboards, xbox360, PS3 and many other gaming consoles ---
SPECIFICATIONS:
Preheater:
Heating element surface : 122 x 122mm
LxWxH : 28cmx25x8 cm
Voltage input : 220V
Upper Heater and Power supply unit (PSU):
Heating element surface : 60 x 60mm
Heating element length ( 25cm)
PSU (Power supply unit) : 15x10x10cm
PSU voltage input : 220V
Stand:
Height : 33cm
Base : 25x16cm
WORKING PRINCIPLE:
Preheater is used to preheat the PCB from the bottom side at around 100 degree Celsius at the start of the reworking process, this is a must on lead free PCB's.
Upper Heater is used to reflow from above the BGA IC at around 225 degree Celsius (lead free) and 180 degree Celsius (non-lead free pcb) during the reworking procedure.
Stand is used to hold the upper heater for steady and safe reworking.
Thermometer is used to measure the temperature of the PCB and its reworked area during the reworking process, to monitor its temperature.
Youtube Videos :
YouTube - Tornado Infra Pro Rework Station
YouTube - Tornado Infra Pro Rework Station - Part 2
Heaters are imported from Germany - known to be best heater producers
For more info, check: http://www.tornadoinfra.com