Tested china flash files post here with log and pictures

[.::shahzad::.]

G right 1130 ok file

Initializing...
DA_LIB_VER_3.6.7.1
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM11
Connected...sending boot...
FDL test...OK
ArmBootMode: 66100000002E5A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: SC6610/20 Flash: SF_MX25U3235E
setting the Flash Parameters...
Settings have been completed!
setting the Serial Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Programming...
Compare Image: Enable
All Done.


100% signel ok file

​

 

[.::shahzad::.]

answer: Tested china flash files post here with log and pictures

Lawow F100 100% ok file

Initializing...
DA_LIB_VER_3.6.7.1
It is sensing the pinout fast...
D-=2 D+=3
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM11
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700900005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: SC6600L7 Flash: NOR_K5L6331CAA
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Programming...
Compare Image: Enable
All Done.


​

 

[.::shahzad::.]

answer: Tested china flash files post here with log and pictures

G *mobile G800a ok file

Initializing...
DA_LIB_VER_3.9.0.0
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM11
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700900005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 115200 is ok
Reading phone HW info...
Read info is done.
CPU: SC6600L7 Flash: NOR_S29GL064A_T
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Programming...
Compare Image: Enable
All Done.

​

 

[.::shahzad::.]

answer: Tested china flash files post here with log and pictures

BILWANI B777

​

 

[.::shahzad::.]

answer: Tested china flash files post here with log and pictures

2730 china Spd file

Initializing...
DA_LIB_VER_3.9.0.0
It is sensing the pinout fast...
D-=8 D+=9
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM14
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_ST_M58WR064KT
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Programming...
Compare Image: Enable
All Done.


​

 

[.::shahzad::.]

answer: Tested china flash files post here with log and pictures

MTK 1130 SPD


Initializing...
DA_LIB_VER_3.9.0.0
It is sensing the pinout fast...
RXD=4 TXD=3
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600701900006A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: SC6600L7A Flash: NOR_ST_M58WR064HU
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Programming...
Compare Image: Enable
All Done.


​

 

[ABDULMANAN]

answer: Tested china flash files post here with log and pictures

MTK 1130 SPD ​

Initializing...
DA_LIB_VER_3.9.0.0
It is sensing the pinout fast...
RXD=4 TXD=3
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600701900006A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: SC6600L7A Flash: NOR_ST_M58WR064HU
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Programming...
Compare Image: Enable
All Done.​

​

this is file work 100% perfect on mtk 1130 8mb