Spreadtrum firmware Android for AvatorBox HERE

[josher]

Spreadtrum firmware Android for AvatorBox HERE

*This topic only allowed to share the firmware.
*Request firmware - is prohibited.
*Spamming is not allowed!
​

 

[josher]

Android I8730
CPU: 88100001 Flash: NAND_TYBC0A111236KC10

Initializing...
DA_LIB_VER_5.6.1.1
You must install the correct USB drivers before any actions...
You will see a new ComPort: SCI USB2Serial(COMxx) in PC Device Manager -> Ports...
Auto reset and search the USB-to-Serial...
Connecting...
Spd USB-to-Serial=COM70
Connected...sending boot...
Boot1 is Done.
Wait for ACK...
Done.
Change baud to 921600
Sending Boot2...
Boot2 is Done.
Wait for ACK...
Done.
ArmBootMode: 8810000100005A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: 88100001 Flash: NAND_TYBC0A111236KC10
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 00
Failed to get address of NV.
Read FS info...done

Download:
share ? Yandex.Disk

 

[josher]

N-mobile S3802i
CPU: 88100001 Flash: NAND_TYBC0A111236KC10

Log Avatorbox:

Chip=SpreadTrum
Action=ReadFlash
FlashType=Nand
boot=8810
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=D:\GSM\Other\Avator\full\spd\S3802i\S380 2i.cmz
Comport=COM35
Baudrate=921600

CPU_Type=88100001
CPU_ID=88100001
NOR_ID=
NOR_Size=
NOR_Name=
NOR_DieCnt=
NAND_ID=009800BCFFFFFFFF
NAND_Size=512MB
NAND_Name=NAND_TYBC0A111236KC10

Initializing...
DA_LIB_VER_5.6.1.1
Connecting...
Connected...sending boot...
Boot1 is Done.
Wait for ACK...
Done.
Change baud to 921600
Sending Boot2...
Boot2 is Done.
Wait for ACK...
Done.
ArmBootMode: 8810000100005A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: 88100001 Flash: NAND_TYBC0A111236KC10
setting the Flash Parameters...
Settings have been completed!
Reading Flash...
Save as: D:\GSM\Other\Avator\full\spd\S3802i\S3802i.cmz
All Done.

Download:
share ? Yandex.Disk

 

[josher]

Android S4
CPU: 88100001 Flash: NAND_TYBC0A111236KC10

Log Avatorbox:

Initializing...
DA_LIB_VER_5.6.1.1
You must install the correct USB drivers before any actions...
You will see a new ComPort: SCI USB2Serial(COMxx) in PC Device Manager -> Ports...
Auto reset and search the USB-to-Serial...
Connecting...
Spd USB-to-Serial=COM70
Connected...sending boot...
Boot1 is Done.
Wait for ACK...
Done.
Change baud to 921600
Sending Boot2...
Boot2 is Done.
Wait for ACK...
Done.
ArmBootMode: 8810000100005A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: 88100001 Flash: NAND_TYBC0A111236KC10
setting the Flash Parameters...
Settings have been completed!
Reading Flash...
Save as: D:\GSM\China\androin MT65xxSpreadturn\S4\S4.cmz
All Done.

Download:
share ? Yandex.Disk

 

[josher]

Samsung S IV I9500 5" 2SIM

CPU: SC8810 Flash: NAND_MT29F4G08ABC_2

Log Avatorbox:

Readinfo

Initializing...
DA_LIB_VER_5.6.1.1
You must install the correct USB drivers before any actions...
You will see a new ComPort: SCI USB2Serial(COMxx) in PC Device Manager -> Ports...
Auto reset and search the USB-to-Serial...
Connecting...
Spd USB-to-Serial=COM42
Connected...sending boot...
Boot1 is Done.
Wait for ACK...
Done.
Change baud to 921600
Sending Boot2...
Boot2 is Done.
Wait for ACK...
Done.
ArmBootMode: 8810004000005A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: SC8810 Flash: NAND_MT29F4G08ABC_2
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 00

Writeflash

Initializing...
DA_LIB_VER_5.6.1.1
You must install the correct USB drivers before any actions...
You will see a new ComPort: SCI USB2Serial(COMxx) in PC Device Manager -> Ports...
Auto reset and search the USB-to-Serial...
Connecting...
Spd USB-to-Serial=COM42
Connected...sending boot...
Boot1 is Done.
Wait for ACK...
Done.
Change baud to 921600
Sending Boot2...
Boot2 is Done.
Wait for ACK...
Done.
ArmBootMode: 8810004000005A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: SC8810 Flash: NAND_MT29F4G08ABC_2
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Erasing Flash...
Done.
Programming...
All Done.

Download:
https://disk.yandex.ua/public/?hash=...%2BBLhCbcVo%3D

 

[josher]

HTC A808
CPU: SC8810 Flash: NAND_MT29F4G08ABC_2

Initializing...
DA_LIB_VER_5.6.1.1
Connecting...
Connected...sending boot...
Boot1 is Done.
Wait for ACK...
Done.
Change baud to 921600
Sending Boot2...
Boot2 is Done.
Wait for ACK...
Done.
ArmBootMode: 8810004000005A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: SC8810 Flash: NAND_MT29F4G08ABC_2
setting the Flash Parameters...
Settings have been completed!
Reading Flash...
Save as: D:\GSM\Other\Avator\full\spd\HTC\A808\A808.cmz
All Done.

Download:
Yandex.Disk

 

[josher]

Android I8160
CPU: SC8810 Flash: NAND_TYBC0A111236KC10


share ? Yandex.Disk

 

[josher]

newish Y868+
CPU: SC8810 Flash: NAND_MT29F4G08ABC_2
log not present

[/URL][/IMG]

[/URL][/IMG]

Y868+.7z ? Yandex.Disk

 

[josher]

Z doxio I9500
CPU: 88100001 Flash: NAND_TYBC0A111236KC10


i9500.7z ? Yandex.Disk
PAC file in stock

 

[josher]

Android S9
CPU: SC8810 Flash: NAND_TYBC0A111236KC10


S9.rar ? Yandex.Disk

 

[josher]

BML Z10
CPU: 88100001 Flash: NAND_H8BCS0UN0MCR


bmlZ10.rar ? Yandex.Disk