For People who:
On this simple tutorial I presume that you have the ff:
1. V0.914034 or greater installed on your Computer.
2. REST/BYPASS Package of Fone.
3. Test Card or Orig SIM where the fone is locked to. (or XSIM, TURBO etc. also if you have)
4. Verify List above if your fone is supported for this Method (Use Identify Button in SETool to verify)
5. DCU-60 (USB Cable)
6. Guts and a little experience in unlocking using SETOOL
6. Optional: Beer
Here are the Steps: Look at the picture closely
Your SETOOL Settings:
Now you may Press Unlock/Repair Button.
Now SETool will inject executor sa fone...
Once SETOOL tells you this:>>> DISCONNECT PHONE NOW INSERT SIM CARD, FULLY TURN PHONE ON AND ATTACH AGAIN BE SURE THAT YOU SET PHONE IN "PHONE MODE" IF ASKED, INSTALL PHONE DRIVERS... Press STOP...
We will not be installing drivers for Modem for CSCA to save time.
Here get ready with your Test SIM or the SIM where you can put the fone in PHONE-MODE (where you can access the Menus)
Remove Fone>Insert SIM>Turn unit ON>Go to Menu>File Manager>Games> Run EXECUTOR (Menu structure may differ on some SE Models, Just search for EXECUTOR file and RUN it.)
Now your fone is dead
.....but not for long...
Go back to SETOOL: go to Settings>USE PRELOADER SECURITY BYPASS. Insert your DEAD Fone
Press Unlock. Wait for SETOOL to finish.
OOOps....Be sure to delete that EXECUTOR file from your fone before releasing fone to your customer.....or else he'll come back with a DEAD fone....
- Don't bother to read sticky FAQ
- Haven't watch the video tutorials
- Lazy-haven't got the time-can't understand without visuals or pics
- Just like to learn in simplest easiest manner (lazy version number 2)
Method applicable on the following Platform/CID using latest V0914034:
(Must work on next SETool Release Also if unchanged)
db201x cid50/cid51/52/53, pnx5230 cid49/cid51, db2020 cid49/cid51/cid52/cid53,
pnx5230 cid52/cid53
(Must work on next SETool Release Also if unchanged)
db201x cid50/cid51/52/53, pnx5230 cid49/cid51, db2020 cid49/cid51/cid52/cid53,
pnx5230 cid52/cid53
On this simple tutorial I presume that you have the ff:
1. V0.914034 or greater installed on your Computer.
2. REST/BYPASS Package of Fone.
3. Test Card or Orig SIM where the fone is locked to. (or XSIM, TURBO etc. also if you have)
4. Verify List above if your fone is supported for this Method (Use Identify Button in SETool to verify)
5. DCU-60 (USB Cable)
6. Guts and a little experience in unlocking using SETOOL
6. Optional: Beer
Here are the Steps: Look at the picture closely
Your SETOOL Settings:
Now you may Press Unlock/Repair Button.
Now SETool will inject executor sa fone...
Once SETOOL tells you this:>>> DISCONNECT PHONE NOW INSERT SIM CARD, FULLY TURN PHONE ON AND ATTACH AGAIN BE SURE THAT YOU SET PHONE IN "PHONE MODE" IF ASKED, INSTALL PHONE DRIVERS... Press STOP...
We will not be installing drivers for Modem for CSCA to save time.
Here get ready with your Test SIM or the SIM where you can put the fone in PHONE-MODE (where you can access the Menus)
Remove Fone>Insert SIM>Turn unit ON>Go to Menu>File Manager>Games> Run EXECUTOR (Menu structure may differ on some SE Models, Just search for EXECUTOR file and RUN it.)
Now your fone is dead
.....but not for long...
Go back to SETOOL: go to Settings>USE PRELOADER SECURITY BYPASS. Insert your DEAD Fone
Press Unlock. Wait for SETOOL to finish.
OOOps....Be sure to delete that EXECUTOR file from your fone before releasing fone to your customer.....or else he'll come back with a DEAD fone....