RIFF JTAG - CDMA Haier C3010, LG LSP450T Repair supported

[Ripon_Manikganj]

22.04.2011 CDMA Haier C3010, LG LSP450T Repair supported


Resurrecting Haier C3010 is simple. Phone is auto powered on with USB Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Current resurrector contains Firmware and EEPROM zones for memory chips with IDs 0x00EC/0x257E and 0x017E/0×2210. Proper data will be selected automatically depending on memory ID in your device.


To resurrect Haier C3010:

• Solder JTAG cable to Haier C3010 JTAG pads;
• Insert USB Data cable into board and PC;
• Make sure Haier C3010 is selected in the list of models;
• Click Resurrect button;
• Choose which areas to flash;
• Wait till software signals a successful operation completion;
• De-solder JTAG wires;

Resurrecting LG LSP450T is simple. Phone is auto powered on with USB Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0×0020/0×8867


To resurrect LG LSP450T:

• Solder JTAG cable to LG LSP450T JTAG pads;
• Insert USB Data cable into board and PC;
• Make sure LG LSP450T is selected in the list of models;
• Click Resurrect button;
• Choose which areas to flash;
• Wait till software signals a successful operation completion;
• De-solder JTAG wires;

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

RIFF Box – JTAG Revolution