- Joined
- Aug 31, 2010
- Posts
- 610
- Likes
- 37
The issue is also before the green light to FTDI's drivers may be caused.
Your problem is hardware or software to detect whether?
Symptoms of a software problem:
1. ATF ATF's box will not be detected by the software.
2. Version of the driver in Device Manager, "2007" "2006" and indicates ..
3. You have recently installed the JAF, UFS, SE, UB, etc. .. FTDI's chips use a different box
A simple fix for the green light to software problems:
1. ATF box to remove from the USB port.
2. By using the driver to remove the ATF:
C: \ AdvanceBox ride lots and Shah's \ Driver \ Remove_ATF_Drivers \ Remove_ATF_Drive the rs.bat
3. ATF box connected to a USB port and install the appropriate drivers.
If you still have problems after re-installing the driver, you probably need to do is
Please change the PCB. Read PCB first before making any changes in this thread.
Q: What is the true problem? ?
: Linear Technology LT1930 1 Korea orders in one place was plagued by problems.
Q is: Call this paragraph? ? ?
A: No, they are idle, sometimes the causes of failure.
Q: OK box yet, but the hot ... This same problem is? ?
: Sorry, yes ...
, Q: So, do I need to order replacement parts?
A: No, I just need to delete the LT1930, see part 3 heading
Q is "small" because it is part of, I'm available? "Rather than" I'm out of the box functionality of?
A: If everything is the same bandwidth of 1.5 GB or more additional search
The first 6 months (box warranty).
Q: When I open my box to guarantee loose six months?
A: No, but you have to box, "a special firmware," you must deploy
Your security is valid.
Q: Box 100% right, I'm free I want to 1.5 gigabytes of extra bandwidth. I can go
In addition, without changing the PCB in my heart, "a special firmware?"
A: No, you kill, you are my heart. PCB applies only to a special modified firmware. After
Put a special firmware in the box, you can not legally go back
Firmware of the product in football, unless the request is direct.
Q: What do I click on the box if you already occurred in a special firmware
Software restore "on the box?"
A: It's 100% safe. Server is detected, a special firmware to restore your
PCB correct firmware.
Q: OK you, I am ready to change A TF box where I can get FULL?
Command?
: Yes, I do: http://www.advance-box.com/modify_pcb/modify_pcb.rar
Br,
advance-box
Your problem is hardware or software to detect whether?
Symptoms of a software problem:
1. ATF ATF's box will not be detected by the software.
2. Version of the driver in Device Manager, "2007" "2006" and indicates ..
3. You have recently installed the JAF, UFS, SE, UB, etc. .. FTDI's chips use a different box
A simple fix for the green light to software problems:
1. ATF box to remove from the USB port.
2. By using the driver to remove the ATF:
C: \ AdvanceBox ride lots and Shah's \ Driver \ Remove_ATF_Drivers \ Remove_ATF_Drive the rs.bat
3. ATF box connected to a USB port and install the appropriate drivers.
If you still have problems after re-installing the driver, you probably need to do is
Please change the PCB. Read PCB first before making any changes in this thread.
Q: What is the true problem? ?
: Linear Technology LT1930 1 Korea orders in one place was plagued by problems.
Q is: Call this paragraph? ? ?
A: No, they are idle, sometimes the causes of failure.
Q: OK box yet, but the hot ... This same problem is? ?
: Sorry, yes ...
, Q: So, do I need to order replacement parts?
A: No, I just need to delete the LT1930, see part 3 heading
Q is "small" because it is part of, I'm available? "Rather than" I'm out of the box functionality of?
A: If everything is the same bandwidth of 1.5 GB or more additional search
The first 6 months (box warranty).
Q: When I open my box to guarantee loose six months?
A: No, but you have to box, "a special firmware," you must deploy
Your security is valid.
Q: Box 100% right, I'm free I want to 1.5 gigabytes of extra bandwidth. I can go
In addition, without changing the PCB in my heart, "a special firmware?"
A: No, you kill, you are my heart. PCB applies only to a special modified firmware. After
Put a special firmware in the box, you can not legally go back
Firmware of the product in football, unless the request is direct.
Q: What do I click on the box if you already occurred in a special firmware
Software restore "on the box?"
A: It's 100% safe. Server is detected, a special firmware to restore your
PCB correct firmware.
Q: OK you, I am ready to change A TF box where I can get FULL?
Command?
: Yes, I do: http://www.advance-box.com/modify_pcb/modify_pcb.rar
Br,
advance-box