tochits
Junior Member
- Joined
- Feb 1, 2012
- Posts
- 5
- Likes
- 0
REDSNOW don't send error[SOLUTION]
Some REDSNOW user has facing error when uploading first stage...
There are two way of solving this problem...
note:don't close the internet connection...
1. By closing all running aplication on your pc.
its located at right side of your monitor...together with time of your PC.
just right click and quit or exit...even YM just close all apps.
then run redsnow.
2.To slow down the data transfer...
example for that is your box that allready installed driver...
like Z3X box or any other box that has USB 2.0 port...
even all your apps is running redsnows will work with no error...
Connect your iDevice USB Cable into box USB Port.
ADDITIONAL INFO...
if iDevice has already had a jailbreak data...
and you want to use the REDSNOW again...
you will get an error not on redsnow its on
processing on your idevice...
NOTE: you can use LATEST REDSNOW once.
Solution
restore it again with no jailbreak data(clean restore with OFW)
and RUN REDSNOW
I'd like to thanks all IRT