problem of flash Nokia 101

[samihssain]

Bonjour
Problem in passing flash Nokia 101 through Box ATF

VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done

Booting Phone...
VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done

Booting Phone...
VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done

Booting Phone...
VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done

Booting Phone...
VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done

Booting Phone...
VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done

Booting Phone...
ERROR: Phone did not Boot !!!



Try booting this phone with "Live Phone" option
Check the option beside the "Scan Phone" button

Flashing ERROR

 

[Shikderg]

Bonjour
Problem in passing flash Nokia 101 through Box ATF


VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done

Booting Phone...
VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done

Booting Phone...
VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done

Booting Phone...
VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done

Booting Phone...
VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done

Booting Phone...
VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done

Booting Phone...
ERROR: Phone did not Boot !!!



Try booting this phone with "Live Phone" option
Check the option beside the "Scan Phone" button

Flashing ERROR

what,s your mobile condition now?

 

[samihssain]

Mobile in good condition I want to add a language only

 

[Shikderg]

Mobile in good condition I want to add a language only

first read info and then flash and must check your cable

 

[samihssain]

The solution was finally thanks to God

Thanks to those who share in this topic
The solution is
Press FLASH then YES and wait until

VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done

Booting Phone ...
At this moment enter RG45 cable entrance Turbo Box
Wimmer .............................................. .

Congratulations, you update