powerful Avator Box Hot function

[josher]

important:In here all is avator Box Members sharing Success
If you have some news and test please send to E-mail asmartgsm@gmail.com

Form Avator Box bugz2001 feedback

Spd 3 IMEI Change !!!

i changed 3 imie by avator with this method

1: change original imie 1 to new imie 1
2: change original imie 2 to new imie 2
3: it will rebuild a new flashfile renamed " rebuild_flashfile name"
4: select the new flash file
5: change original imie 1 (in this case imie 2 ) to new imie 1 (in this case imie 2 )
6: change original imie 2 (in this case imie 3 ) to new imie 2 (in this case imie 3 )
7: this is rebuild a new flash file call "rebuild_rebuild_flash file"
8: write this new flash to fone​

 

[josher]

Avator Box RJ45 Pinfind (Easy Repair China nokia Pinout in PCB)

 

[josher]

Avator Box Mstar Support News!!!
<<Infinite possibility>><<Infinite upgrade>>

16MB Flash Read only 1 min 15 Sec

 

[josher]

Spd Repair Only a few seconds <<Success Format Spd Mobile with avator box>>

 

[josher]

Two pinfind options in SPD 6600L
Avator Box slove the 6600L CPU 100%


Log = using S6600L/WE6226 - COM


Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
RXD=7 TXD=9
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100006A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: 66007001 Flash: NOR_EN71GL064
Set FLASH Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 0A
IMEI 1=355289000606939
IMEI 2=355289000606947
--------NOR_FLASH_CONFIG--------
Flash Bank count=1
EFS sector count=6
File sector count=0
Sector size=0x00010000
Flash start addr=0x00000000
Flash size=0x00800000
Fix NV addr=0x00780000
Product information addr=0x007F0000
MMI resource addr=0x005C0000
------Auto Format Address-------
Start=0x00790000
Size =0x00060000
Read FS info...done


Log = using S6600L/WE6226 - USB

Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM113
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 ok
Reading phone HW info...
Read info is done.
CPU: 66007001 Flash: NOR_EN71GL064
Set FLASH Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 0A
IMEI 1=355289000606939
IMEI 2=355289000606947
--------NOR_FLASH_CONFIG--------
Flash Bank count=1
EFS sector count=6
File sector count=0
Sector size=0x00010000
Flash start addr=0x00000000
Flash size=0x00800000
Fix NV addr=0x00780000
Product information addr=0x007F0000
MMI resource addr=0x005C0000
------Auto Format Address-------
Start=0x00790000
Size =0x00060000
Read FS info...done

 

[josher]

Avator Box LG MTK Mobile Support
<test LG GX220>​

Read Info

Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=2
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6235, HardwareVer:8A01, SoftwareVer:8A04
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0000000000000000
Nand Flash ID: 00EC00F100000095
Read Hardware Information is done.
Get Project ID from phone...
Project ID: GX200-00-V10e-724-XX-FEB-24-2010

Write Imei

Initializing...
DA_LIB_VER_2.5.1.2
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=2
Connecting...Please hold on the POWER key until the red gauge is going...
Connecting, Please turn on the phone...
Connected! Checking IMEI...
Original IMEI 1= 358688000000058
IMEI 1 rebuild has been implemented: 354521200000000
Original IMEI 2= 358688000000058
IMEI 2 rebuild has been implemented: 354782220000000
Need to restart the phone to verify new imei.

 

[josher]

Avator Box help you Repair Hardware
<best tool no need talk more>​

flash ID 000000000000
reheat alug mtk chip and flash chip

then try on the fone same no power
then detect again
Format it

here result

 

[josher]

Avator Box Easy Unlock/Pinfind CDMA (qualcomm Mobile)
HANDSET MODEL ZTE-C335 CDMA​

 

[josher]

<<great Avator Box Support the philips original >>
really;avator Box no only for china

 

[josher]

avator Box success flash the INFINEON With 5.301 Tool

Initializing...
DA_LIB_VER_3.2.2.7
It is sensing the pinout fast,please hold on the phone Power key
RXD=8 TXD=7
Connecting...Please hold on the POWER key until the red gauge is finishing...
Changing baudrate...
Set baudrate to 115200 ok
Reading phone HW info...
Read info is done.
BB: PMB7880 Flash: NOR_MX29LV320T
setting the Flash Parameters...
Settings have been completed!
Unlocking all blocks before program/erase...
Unlock Done.
Programming...
Compare Image: Enable
All Done.

 

[josher]

MTK Mobile touchscreen calibration Done with avator Box​

 

[josher]

example:
Mobile:PHERIPS k850 WT6226_ST M36L0R7050U3ZS

First,we need Find The mobile pinout in PCB

Connect the Mobile with UFC cable
and use the Box red and black to mobile bettery Pin

Now we can pinfind and unlock with Avator Box

Just a Simple example In here!!!